Sonoma CGR30LP Grill Parts

Highest quality replacement parts for your Sonoma CGR30LP - Free USA shipping $49 or more* - No Sales Tax*

Sonoma CGR30LP owners manual and diagrams

Diagrams & owners manual not available for grill model# CGR30LP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts to fit Sonoma model: CGR30LP

On this page you'll find all of the parts that fit model Sonoma CGR30LP. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a warming rack and there are none here, click the warming rack button to see all of the racks we have for Sonoma grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Sonoma CGR30LP BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Sonoma model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

CGR30LP Burners

Click for photos

Stainless steel triple burner set for Sonoma model CGR30LP.

Part Number: SONT3
Dimensions: 17 13/16” x 18 1/2”
Material: stainless steel
Weight: 1.6

==> All Sonoma Burners.

CGR30LP Burner Brackets and Carryovers

Click for photos

Stainless steel Z-Bar burner support bracket. Made in USA

Part Number: CLA-MS0116
Dimensions: 2” x 23”
Material: stainless steel
Weight: 0.70

==> All Sonoma Burner Brackets and Carryovers.

CGR30LP Cooking Grids

Click for photos

Stainless steel cooking grids with solid 1/4” rods (set of 3) for Sonoma model CGR30LP.

Part Number: 53S33
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 27 3/8”
Material: stainless steel wire
Weight: 10.0

==> All Sonoma Cooking Grids.

CGR30LP Heat Plates

Click for photos

Bottom Flavor Grid for Sonoma model CGR30LP. Stainless steel. Made in USA.

Part Number: CLA-MS0181
Dimension Front-to-Back: 12”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.70

Click for photos

Upper flavor grid for Sonoma model CGR30LP. Stainless steel. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

NOTE: Has unique underside, see photos.

Part Number: CLA-TS0182
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 1.2

Click for photos

Stainless steel Flavor Grid for Sonoma model CGR30LP.

Part Number: SONHP1
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.6

==> All Sonoma Heat Plates.

CGR30LP Igniter Components

Click for photos

21” wire for side burner or other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive early July

Part Number: 10342-T12
Dimensions: 21
Weight: 0.05

Click for photos

Ceramic electrode with mounting bracket. For use with triple burner assembly part# SONT3 and ALTT3.

Sold individually, two (2) required
Use old screws and support plate

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-25B
Weight: 0.3

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

==> All Sonoma Igniter Components.

CGR30LP Miscellaneous Repair Parts

Click for photos

Electrode heat shield. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0085
Dimensions: 16 13/16
Material: stainless steel
Weight: 0.4

==> All Sonoma Miscellaneous Repair Parts.

CGR30LP Accessories

Wundersmoke Hickory Chips. These unique hickory wood smoking chips add distinctive hickory wood flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-6
Weight: 1.0

Click for photos

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

Click for photos

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

Click for photos

Aluminum foil grilling trays. Package of three.

Heavy duty aluminum foil
Re-usable
Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2

==> All CGR30LP Accessories.

BBQ Part Categories

Sonoma CGR30LP -Tuesday, Jun 10 2025

Return to Sonoma grills main page

More Sonoma grill models we have parts for
CGR27 \| CGR27LP \| CGR30 \| CGR30NG \| CGR44 \| CGR54 \| PF30LP \| PFISLP \| PFISNG \| PFSISLP \| SGIR27LP \| SGR27LP \| SGR30 \| SGR30LP \| SGR30MLP \|