Kenmore Valves, Orifices, and Manifolds

Dual brass LP valve assembly. Includes left and right control valves and valve manifold. Fits Arkla up-front control grills and others requiring 45 degree angle valves.

• For use with LP gas
• Includes two orifices drilled to #57 drill size
• Includes pre-assembled 45 degree angle fitting, not shown in photo

Part Number: VLV-28
Material: brass
Weight: 1.1

VLV-28 fits these 134 Kenmore models:
1058480 1066180 1066188 1075180 1077180 1084080 1084280	1085780 1094080 1095081 1095180 2348100 2348130 2348170	2348171 2348172 2348187 2348190 2353080 2353081 2353680	2357630 2357631 2357650 2357651 2357660 2357661 2357670	2357671 2357690 2357691 2358110 2358130 2358170 100 more models...

HVR 3B 39BTU KEN 8SB AUTO

Part Number: SP5030-4
Weight: 1.0

SP5030-4 fits this one Kenmore model:
259.16238

HVR DL SDBRN 48K BTU W/ S/B

Part Number: SP5027-4
Weight: 1.0

SP5027-4 fits this one Kenmore model:
259.16504

VALVE BRACKET S/B (LONG)

Part Number: SP5007-6
Weight: 1.0

SP5007-6 fits these 3 Kenmore models:
259.162190	259.162504	259.16504

In post control valve without manifold or orifice, accepts accepts common 5/16” x 32 spud orifice. Fits Arkla and most twin in post control grills with spud orifice. Orifice not included.

Part Number: 38700
Dimensions: 3 1/8” x 1 3/8”
Material: brass
Weight: 0.3

38700 fits these 234 Kenmore models:
22500 Nat 22502 Nat 22520 Nat 22522 Nat 22529 LP 22530 Nat 22532 Nat	22534 Nat 22539 LP 22552 Nat 22559 LP 22569 Nat 22702 Nat 2272202 Nat	22729 LP 22732 Nat 22739 Nat 22742 Nat 22749 LP 22752 Nat 22754	22759 Nat 22762 Nat 22769 LP 2317850 2317870 2317890 2317919	2317930 2317970 2337730 LP 2337731 Nat 2337751 Nat 2337760 LP 200 more models...

Valve with 45° angled orifice snout built to accept 11/32 x 32 threaded spud type orifice (not provided); uses orifice # 33200. Mounts to the right side of original up-front control manifold assembly. Valve stem is 8mm, and needs a knob with a 9 D-value. Can use with universal knobs 00110 or 00310 or 01800 depending on needed knob stem length.

Part Number: 38600
Dimensions: 3 9/16” x 1 1/4”
Material: brass
Weight: 0.4

3” valve shaft extender.

Part Number: 38000
Dimensions: 3 1/16” x 0 1/2”
Material: brass
Weight: 0.1

38000 fits these 3 Kenmore models:
916.55191	916.55201	916.55211

Clamp-on brass gas valve with straight outlet. Includes orifice.

• D-Value: 12 o'clock
• Stem diameter: 6mm
• Stem length: 1 3/4”

Includes orifice with #72 starter hole. Must be drilled to proper drill size.

Part Number: 3700C
Dimensions: 4 15/16” x 2 1/8”
Material: brass
Weight: 0.5

3700C fits these 115 Kenmore models:
141.15221 141.152210 141.15222 141.15223 141.152230 141.15225 141.15227	141.152270 141.152271 141.15337 141.153371 141.153372 141.153373 141.15401	141.1554 141.155400 141.155401 141.156400 141.15790 141.157900 141.157901	141.157902 141.15794 141.157940 141.157941 141.15795 141.157950 141.157951	141.15798 141.157980 141.157981 141.15799 141.157990 141.157991 81 more models...

Right valve for manifold 35950. Fits Charbroil U-burner models: 7000, 8000, and 9000 series.

Part Number: 35970
Dimensions: 2 15/16” x 1 5/16”
Material: brass
Weight: 0.5

35970 fits these 6 Kenmore models:
15643 1585	15855 415.15643	415.1585 415.15855

Left valve for manifold 35950. Fits Charbroil U-burner models: 7000, 8000, and 9000 series.

Part Number: 35960
Dimensions: 2 15/16” x 1 5/16”
Material: brass
Weight: 0.5

35960 fits these 6 Kenmore models:
15643 1585	15855 415.15643	415.1585 415.15855

Brass spud orifice with 11/32” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 33200
Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01

Brass long blunt-end hood orifice drilled to #64 starter hole. Fits valve 3042C, others. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31800
Dimensions: 1 5/16” x 0 9/16”
Material: brass
Weight: 0.1

31800 fits these 5 Kenmore models:
141.15640	141.166400	141.168600	141.17640	141.17860

Brass spud orifice with 5/16” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31600
Dimensions: 0 3/8” x 0 7/16”
Material: brass
Weight: 0.01

31600 fits these 134 Kenmore models:
1058480 1066180 1066188 1075180 1077180 1084080 1084280	1085780 1094080 1095081 1095180 2348100 2348130 2348170	2348171 2348172 2348187 2348190 2353080 2353081 2353680	2357630 2357631 2357650 2357651 2357660 2357661 2357670	2357671 2357690 2357691 2358110 2358130 2358170 100 more models...

Brass orifice. 6mm x 3/4” cone shaped orifice with #64 drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31400
Dimensions: 0 3/4” x 0 5/16”
Material: brass
Weight: 0.01

31400 fits these 115 Kenmore models:
141.15221 141.152210 141.15222 141.15223 141.152230 141.15225 141.15227	141.152270 141.152271 141.15337 141.153371 141.153372 141.153373 141.15401	141.1554 141.155400 141.155401 141.156400 141.15790 141.157900 141.157901	141.157902 141.15794 141.157940 141.157941 141.15795 141.157950 141.157951	141.15798 141.157980 141.157981 141.15799 141.157990 141.157991 81 more models...

Clamp-on brass valve with 45° gas outlet.

• D-Value is 12 o'clock
• Stem diameter: 6mm
• Orifice not included, use original or our part#31800

Part Number: 3042C
Weight: 0.5

3042C fits these 5 Kenmore models:
141.15640	141.166400	141.168600	141.17640	141.17860

Neoprene valve gasket for clamp-on gas control valves. 19mm.

Part Number: 00019
Dimensions: 0 1/2” x 0 1/4”
Material: neoprene
Weight: 0.01

00019 fits these 116 Kenmore models:
141.15221 141.152210 141.15222 141.15223 141.152230 141.15225 141.15227	141.152270 141.152271 141.15337 141.153371 141.153372 141.153373 141.15401	141.1554 141.155400 141.155401 141.15640 141.156400 141.15790 141.157900	141.157901 141.157902 141.15794 141.157940 141.157941 141.15795 141.157950	141.157951 141.15798 141.157980 141.157981 141.15799 141.157990 82 more models...