Grand Hall SS72-NG Grill Parts

Highest quality replacement parts for your Grand Hall SS72-NG - Free USA shipping $49 or more* - No Sales Tax*

Grand Hall SS72-NG owners manual and diagrams

Diagrams & owners manual not available for grill model# SS72-NG. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts to fit Grand Hall model: SS72-NG

This page shows all of the parts we know fit model Grand Hall SS72-NG. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Grand Hall grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Grand Hall SS72-NG BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Grand Hall model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

SS72-NG Burners

P02008024A / SCTB5

Click for photos

Sam's Club burner with electrode tab; if not needed, refer to alternative burner for less, part number SCTB3 for Grand Hall model SS72-NG.

Part Number: SCTB5 (Replaces Grand Hall P02008024A)
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

SCTB3

Click for photos

Stainless steel burner without an electrode tab; if not needed, this is a good replacement burner for burner part numbers 10241 and SCTB5 for Grand Hall model SS72-NG.

Part Number: SCTB3
Dimensions: 14 3/4
Material: stainless steel
Weight: 1.0

==> All Grand Hall Burners.

SS72-NG Cooking Grids

P01615020A / 64252

Click for photos

Cast iron cooking grids for Grand Hall model SS72-NG. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 64252 (Replaces Grand Hall P01615020A)
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 28 1/8”
Material: matte cast iron
Weight: 13.12

==> All Grand Hall Cooking Grids.

SS72-NG Heat Plates

P01705006E / SCHP5

Click for photos

Stainless steel Flame Tamer for Grand Hall model SS72-NG.

Part Number: SCHP5 (Replaces Grand Hall P01705006E)
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 7 13/16”
Material: stainless steel
Weight: 1.0

CLA-TS0128

Click for photos

Stainless steel heat plate/Flame Tamer for Grand Hall model SS72-NG. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0128
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 7 13/16”
Material: stainless steel
Weight: 1.03

==> All Grand Hall Heat Plates.

SS72-NG Igniter Components

P02609002B / IG-17B

Click for photos

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-17B (Replaces Grand Hall P02609002B)
Weight: 0.11

P02502145C / IGEIB6-B

Click for photos

Battery powered push button igniter.

Has six (6) spade type male connectors.
Uses 1 AA battery (not supplied)
Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B (Replaces Grand Hall P02502145C)
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

10342-T14

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-20B

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All Grand Hall Igniter Components.

SS72-NG Rotisserie components

RO-6

Click for photos

Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

==> All Grand Hall Rotisserie components.

SS72-NG Accessories

BP-7

Click for photos

Wundersmoke Maple Chips. These unique maple wood smoking chips add distinctive maple wood flavoring to your food. For use will all grills. One 1lb bag. Comes with reusable puck.

Part Number: BP-7
Weight: 1.0

SF-1

Click for photos

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

24785

Click for photos

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

14950

Click for photos

Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.

Part Number: 14950
Material: stailess steel
Weight: 0.5

SDDPS

Click for photos

Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30

==> All SS72-NG Accessories.

BBQ Part Categories

Grand Hall SS72-NG -Tuesday, May 12 2026

Return to Grand Hall grill parts main page

More Grand Hall grill models we have parts for

BTE2616ANG | BTE2616BLP | BTE2616BNG | BTE3211ALP | BTE3211ANG | BTE3212ALP | BTE3212ANG | BTE3212BLP | BTE3212BNG | BTE3216ALP | BTE3216ANG | BTE3216BLP | BTE3216BNG | BTE3221BLP | BTE3221BNG | BTE3811ALP | BTE3811ANG | BTE3812BLP | BTE3812BNG | BTE3816BLP | BTE3816BNG | BTE3821BLP | BTE3821BNG | BTH2610ALP | BTH2610ANG | BTH2614BLP | BTH2614BNG | BTH2616ALP | BTH2616ANG | BTH2616BLP | BTH2616BNG | BTH3210LLP | BTH3210LNG | BTH3214BLP | BTH3214BNG | BTH3216ALP | BTH3216ANG | BTH3216BLP | BTH3216BNG | C3906ALP | CG587 | CG587NG | CG7200 | CG7200LP | CG7200NG | CGE06ALP | CGI07ALP | CGI08ALP | CGI09ALP | CGT12ALP | Complete list of Grand Hall grill models...

*Orders for Grand Hall grill model SS72-NG $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026