Grill-Parts home

Grand Hall CG7200 Grill Parts

Grand Hall logo

 

 

Highest quality replacement parts for your Grand Hall CG7200 - Free USA shipping $49 or more* - No Sales Tax*

 

Grand Hall CG7200 owners manual and diagrams
Diagrams & owners manual not available for grill model# CG7200. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts for Grand Hall model: CG7200
This page shows all of the parts we know fit model Grand Hall CG7200. If the part you need is not shown below, try clicking the appropriate category button on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Grand Hall grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Grand Hall CG7200 BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Grand Hall model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


CG7200 Burners

SCTB3
Click for photos
Stainless steel burner without an electrode tab; if not needed, this is a good replacement burner for burner part numbers 10241 and SCTB5 for Grand Hall model CG7200.


Part Number: SCTB3
Dimensions: 14 3/4
Material: stainless steel
Weight: 1.0

$37.70
 
SALE  $29.85

SCTB5
Click for photos
Sam's Club burner with electrode tab; if not needed, refer to alternative burner for less, part number SCTB3 for Grand Hall model CG7200.

Part Number: SCTB5
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

$36.43
 

==> All Grand Hall Burners.
 





CG7200 Cooking Grids

506S3
Click for photos
Stainless steel cooking grid set for Grand Hall model CG7200.
  • 5/16” diameter stainless rods
  • 304 stainless steel


Part Number: 506S3
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1

$277.67
 

==> All Grand Hall Cooking Grids.
 





CG7200 Heat Plates

CLA-TS0314
Click for photos
Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate for Grand Hall model CG7200. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

$27.28
 

SCHP4
Click for photos
Stainless steel heat plate; also referred to as a flame tamer and savor plate for Grand Hall model CG7200.

Part Number: SCHP4
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

$27.28
 

==> All Grand Hall Heat Plates.
 





CG7200 Igniter Components

10342-T14
Click for photos
21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

$4.32
 

IG-17B
Click for photos
Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-17B
Weight: 0.11

$11.34
 

IGEIB6-B
Click for photos
Battery powered push button igniter.
  • Has six (6) spade type male connectors.
  • Uses 1 AA battery (not supplied)
  • Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IGEIB6-B
Weight: 0.3

$34.11
 

IG-7B
Click for photos
20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-7B
Weight: 0.02

$4.75
 

IG-30B
Click for photos
46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$8.29
 

IG-48B
Click for photos
16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-48B
Dimensions: 16
Weight: 0.05

$6.35
 

IG-20B
Click for photos
Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-20B
Weight: 0.05

$6.61
 

==> All Grand Hall Igniter Components.
 





CG7200 Rotisserie components

RO-6
Click for photos
Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

$85.09
 

==> All Grand Hall Rotisserie components.
 





CG7200 Accessories

00220
Click for photos
GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.

Part Number: 00220
Weight: 2.0

$6.87
 

40259
Click for photos
15” Stainless steel tong.
  • Soft comfort grip
  • Locking mechanism


Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

$9.92
 

SR-7B
Click for photos
Universal 6 piece chrome plated skewer set. Designed so food does not rotate. Great for kabobs! 19 1/2” long.

Part Number: SR-7B
Dimensions: 19 1/2
Material: chrome steel
Weight: 1.0

$14.27
 

14950
Click for photos
Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.



Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41
 

90963
Click for photos
Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most



Part Number: 90963
Weight: 0.2

$19.30
 

==> All CG7200 Accessories.
 



BBQ Part Categories


















 
 

Grand Hall grill CG7200 - Tuesday, May 12 2026

Return to Grand Hall grill parts main page



More Grand Hall grill models we have parts for
MONARCH04ALP | MONARCH04ANG | MONARCH04BNG | PAT502 | PR364LP | REGAL04ALP | REGAL04ANG | REGAL04CLP | SK472 | SK472B | SK472NG | SMD13ALP | SMD13ANG | SS42 | SS42-B | SS42-B-NG | SS42-SB | SS42-SB-NG | SS42NG | SS454-B-NG | SS50072LP | SS50072NG | SS525LP | SS525NG | SS54 | SS54-LP | SS60884 | SS60884LP | SS60884NG | SS62884LP | SS62884NG | SS64 | SS64-B | SS64-B-NG | SS64-LP | SS64-NG | SS64LP | SS64NG | SS706 | SS706-108 | SS72-B | SS72-LP | SS72-NG | SS72LP | SS72NG | SS73 | STS2611ALP | STS2611ANG | STS2611BLP | STS2611BNG | Complete list of Grand Hall grill models...



*Orders for Grand Hall grill model CG7200 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026