Grand Hall SS72NG Grill Parts

Highest quality replacement parts for your Grand Hall SS72NG - Free USA shipping $49 or more* - No Sales Tax*

Grand Hall SS72NG owners manual and diagrams

Diagrams & owners manual not available for grill model# SS72NG. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts to fit Grand Hall model: SS72NG

All of the parts we have for Grand Hall SS72NG are shown on this page. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Grand Hall grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Grand Hall SS72NG BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Grand Hall model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

SS72NG Burners

SCTB5

Click for photos

Sam's Club burner W/ Lip like OEM for Grand Hall model SS72NG.

Part Number: SCTB5
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

==> All Grand Hall Burners.

SS72NG Cooking Grids

P01615020A / 64252

Click for photos

Cast iron cooking grids for Grand Hall model SS72NG. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 64252 (Replaces Grand Hall P01615020A)
Dimension Front-to-Back: 17 1/4”
Dimension Side-to-Side: 28 1/8”
Material: matte cast iron
Weight: 13.12

==> All Grand Hall Cooking Grids.

SS72NG Heat Plates

SCHP1

Click for photos

Stainless steel heat plate for Grand Hall model SS72NG.

Part Number: SCHP1
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 1.0

P01705006E / SCHP5

Click for photos

Stainless steel Flame Tamer for Grand Hall model SS72NG.

Part Number: SCHP5 (Replaces Grand Hall P01705006E)
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 7 13/16”
Material: stainless steel
Weight: 1.0

CLA-TS0128

Click for photos

Stainless steel heat plate/Flame Tamer for Grand Hall model SS72NG. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0128
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 7 13/16”
Material: stainless steel
Weight: 1.03

==> All Grand Hall Heat Plates.

SS72NG Igniter Components

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

P02609002B / IG-17B

Click for photos

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-17B (Replaces Grand Hall P02609002B)
Weight: 0.11

P02502145C / IGEIB6-B

Click for photos

Battery powered push button igniter.

Has six (6) spade type male connectors.
Uses 1 AA battery (not supplied)
Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B (Replaces Grand Hall P02502145C)
Weight: 0.3

==> All Grand Hall Igniter Components.

SS72NG Regulators and Hoses

P03601003A / HR-4B

Click for photos

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces Grand Hall P03601003A)
Dimensions: 22
Weight: 0.8

==> All Grand Hall Regulators and Hoses.

SS72NG Accessories

SF-1

Click for photos

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

WB-7

Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2

==> All SS72NG Accessories.

BBQ Part Categories

Grand Hall SS72NG -Sunday, May 5 2024

Return to Grand Hall grill parts main page

More Grand Hall grill models we have parts for

CG587 | CG587NG | CG7200 | CG7200LP | CG7200NG | CGE06ALP | CGI07ALP | CGI08ALP | CGI09ALP | CGT12ALP | CSTS13ALP | CSTS13ANG | DS08ALP | DS08ANG | FL-300 | GC1000 | GC1001 | GC2000 | GC2001 | GC3000 | GC3001 | GC3500 | GC3501 | GQ-5001D | GQ-5002D | HGI08ALP | HGI08ANG | IT2612ALP | M2505ANG | M3206ALP | M3206ANG | M3207ALP | M3207ANG | M3905ALP | M3905ANG | M5205ALP | M5205ANG | MEV05ALP | MEV06ALP | MEV808ALP | MFA05ALP | MG2207ALP | MG3208SLP | MLS972 | MONARCH04ALP | MONARCH04ANG | MONARCH04BNG | PAT502 | PR364LP | REGAL04ALP | Complete list of Grand Hall grill models...

*Orders for Grand Hall grill model SS72NG $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024