Grill-Parts home

Grand Hall CG7200NG Grill Parts

Grand Hall logo

 

 

Highest quality replacement parts for your Grand Hall CG7200NG - Free USA shipping $49 or more* - No Sales Tax*

 

Grand Hall CG7200NG owners manual and diagrams
Diagrams & owners manual not available for grill model# CG7200NG. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts for the Grand Hall model: CG7200NG
All of the parts we have for Grand Hall CG7200NG are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Grand Hall grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Grand Hall CG7200NG BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Grand Hall model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


CG7200NG Burners

SCTB3
Click for photos
Stainless steel burner without an electrode tab; if not needed, this is a good replacement burner for burner part numbers 10241 and SCTB5 for Grand Hall model CG7200NG.


Part Number: SCTB3
Dimensions: 14 3/4
Material: stainless steel
Weight: 1.0

$37.70
 
SALE  $29.85

SCTB5
Click for photos
Sam's Club burner with electrode tab; if not needed, refer to alternative burner for less, part number SCTB3 for Grand Hall model CG7200NG.

Part Number: SCTB5
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

$36.43
 

==> All Grand Hall Burners.
 





CG7200NG Cooking Grids

506S3
Click for photos
Stainless steel cooking grid set for Grand Hall model CG7200NG.
  • 5/16” diameter stainless rods
  • 304 stainless steel


Part Number: 506S3
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1

$277.67
 

==> All Grand Hall Cooking Grids.
 





CG7200NG Heat Plates

CLA-TS0314
Click for photos
Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate for Grand Hall model CG7200NG. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

$27.28
 

SCHP4
Click for photos
Stainless steel heat plate; also referred to as a flame tamer and savor plate for Grand Hall model CG7200NG.

Part Number: SCHP4
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

$27.28
 

==> All Grand Hall Heat Plates.
 





CG7200NG Igniter Components

10342-T14
Click for photos
21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

$4.32
 

IG-17B
Click for photos
Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-17B
Weight: 0.11

$11.34
 

IGEIB6-B
Click for photos
Battery powered push button igniter.
  • Has six (6) spade type male connectors.
  • Uses 1 AA battery (not supplied)
  • Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IGEIB6-B
Weight: 0.3

$34.11
 

IG-7B
Click for photos
20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-7B
Weight: 0.02

$4.75
 

IG-30B
Click for photos
46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$8.29
 

IG-48B
Click for photos
16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-48B
Dimensions: 16
Weight: 0.05

$6.35
 

IG-20B
Click for photos
Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-20B
Weight: 0.05

$6.61
 

==> All Grand Hall Igniter Components.
 





CG7200NG Accessories

00240
Click for photos
Cherry wood chips.
  • All natural wood smoke flavor
  • Great for use in BBQ's or smokers.
  • 170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00240
Weight: 1.14

$8.47
 

40730
Click for photos
2 in 1 chrome plated turner / tong with PVC coated handle

Part Number: 40730
Dimensions: 14
Material: chrome steel
Weight: 0.6

$7.45
 

11040
Click for photos

7” Bamboo BBQ Kabobs. Appetizer Server/Grilling Skewers - pack of 50. Limited to supplies on hand.

  • Ideal for searving or grilling appetizers
  • Wide end for easy handling


Part Number: 11040
Dimensions: 7
Weight: 0.4

$4.75
 

BB-5
Click for photos
Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

$9.36
 

RR-3
Click for photos
Roast holder. This holder is an ideal way to cook and also carry a roast from the grill. Made of heavy, bright nickel-plated steel, 15 1/4” L x 10 1/2” W.

Part Number: RR-3
Dimensions: 19 1/2
Weight: 1.0

$13.71
 

BRGG
Click for photos
Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0

$20.11
 

==> All CG7200NG Accessories.
 



BBQ Part Categories


















 
 

Grand Hall grill model CG7200NG - Tuesday, May 12 2026

Return to Grand Hall grill parts main page



More Grand Hall grill models we have parts for
8001 | 9701D | 9803S | 9905TB | 9912T | A5 | B000BUQMII | B000BUU450 | B000BUU45A | B2608ALP | B2608ANG | B2618-SB | B3208ALP | B3807ALP | B3807ANG | B3808ALP | B3808ANG | B3810ALP | B3810ANG | B3810BLP | B3810BNG | B3812ALP | B3812ANG | B3812BLP | B3812BNG | B3816ALP | B3816ANG | B3816BLP | B3816BNG | B4019LP | B4019NG | BAI07ALP | BAI07ANG | BAI08ALP | BAI08ANG | BAI10ALP | BAI10ANG | BAI10BLP | BAI10BNG | BAI12ALP | BAI12ANG | BAI12BLP | BAI12BNG | BAI16ALP | BAI16ANG | BAI16BLP | BIG-8116 | BM42 | BM584 | BM584LP | Complete list of Grand Hall grill models...



*Orders for Grand Hall grill model CG7200NG $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About UsContact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026