Grill-Parts home
 

Grand Hall CG7200LP Grill Parts

Grand Hall logo

 

 

Highest quality replacement parts for your Grand Hall CG7200LP - Free USA shipping $49 or more* - No Sales Tax*

 

Grand Hall CG7200LP owners manual and diagrams
Diagrams & owners manual not available for grill model# CG7200LP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts to fit Grand Hall model: CG7200LP
All of the parts we have for Grand Hall CG7200LP are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Grand Hall grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Grand Hall CG7200LP BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Grand Hall model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


CG7200LP Burners

SCTB5
Click for photos
Sam's Club burner W/ Lip like OEM for Grand Hall model CG7200LP.

Part Number: SCTB5
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

$36.43
 
Qty
 

==> All Grand Hall Burners.
 





CG7200LP Cooking Grids

506S3
Click for photos
Stainless steel cooking grid set for Grand Hall model CG7200LP.
  • 5/16” diameter stainless rods
  • 304 stainless steel


Part Number: 506S3
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1

$205.72
 
Qty
 

==> All Grand Hall Cooking Grids.
 





CG7200LP Heat Plates

CLA-TS0314
Click for photos
Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate for Grand Hall model CG7200LP. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

$27.28
 
Qty
 

SCHP4
Click for photos
Stainless steel heat plate; also referred to as a flame tamer and savor plate for Grand Hall model CG7200LP.

Part Number: SCHP4
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

$27.28
 
Qty
 

==> All Grand Hall Heat Plates.
 





CG7200LP Igniter Components

10342-T14
Click for photos
21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

$4.32
 
Qty
 

IG-17B
Click for photos
Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-17B
Weight: 0.11

$11.34
 
Qty
 

IGEIB6-B
Click for photos
Battery powered push button igniter.
  • Has six (6) spade type male connectors.
  • Uses 1 AA battery (not supplied)
  • Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IGEIB6-B
Weight: 0.3

$34.11
 
Qty
 

IG-7B
Click for photos
20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-7B
Weight: 0.02

$4.75
 
Qty
 

IG-30B
Click for photos
46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.51
 
Qty
 

IG-48B
Click for photos
16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-48B
Dimensions: 16
Weight: 0.05

$6.35
 
Qty
 

IG-20B
Click for photos
Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-20B
Weight: 0.05

$6.55
 
Qty
 

==> All Grand Hall Igniter Components.
 





CG7200LP Rotisserie components

RO-4
Click for photos
Universal durable battery operated rotisserie motor. Conveniently eliminates the need for electric cords. Runs on 2 D cells (not included).

Part Number: RO-4
Weight: 1.0

$28.22
 
Qty
 

==> All Grand Hall Rotisserie components.
 





CG7200LP Accessories

BP-5
Click for photos
Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

$9.75
 
Qty
 

40259
Click for photos
15” Stainless steel tong.
  • Soft comfort grip
  • Locking mechanism


Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

$9.92
 
Qty
 

24785
Click for photos
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

$22.60
 
Qty
 

14913
Click for photos

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.



Part Number: 14913
Material: stailess steel
Weight: 0.5

$14.41
 
Qty
 

VTC-B
Click for photos
Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3

$5.07
 
Qty
 

==> All CG7200LP Accessories.
 



BBQ Part Categories


















 
 

Grand Hall CG7200LP -Tuesday, Oct 7 2025

Return to Grand Hall grills main page



More Grand Hall grill models we have parts for
MFA05ALP | MG2207ALP | MG3208SLP | MLS972 | MONARCH04ALP | MONARCH04ANG | MONARCH04BNG | PAT502 | PR364LP | REGAL04ALP | REGAL04ANG | REGAL04CLP | SK472 | SK472B | SK472NG | SMD13ALP | SMD13ANG | SS42 | SS42-B | SS42-B-NG | SS42-SB | SS42-SB-NG | SS42NG | SS454-B-NG | SS50072LP | SS50072NG | SS525LP | SS525NG | SS54 | SS54-LP | SS60884 | SS60884LP | SS60884NG | SS62884LP | SS62884NG | SS64 | SS64-B | SS64-B-NG | SS64-LP | SS64-NG | SS64LP | SS64NG | SS706 | SS706-108 | SS72-B | SS72-LP | SS72-NG | SS72LP | SS72NG | SS73 | Complete list of Grand Hall grill models...



*Orders for Grand Hall grill model CG7200LP $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: Oct 7 2025