Grand Hall CGI08ALP Grill Parts

Highest quality replacement parts for your Grand Hall CGI08ALP - Free USA shipping $49 or more* - No Sales Tax*

Grand Hall CGI08ALP owners manual and diagrams

Diagrams & owners manual not available for grill model# CGI08ALP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for Grand Hall model: CGI08ALP

All of the parts we have for Grand Hall CGI08ALP are shown on this page. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Grand Hall grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Grand Hall CGI08ALP BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Grand Hall model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

CGI08ALP Burners

P02008032A / SCTB5

Click for photos

Sam's Club burner with electrode tab; if not needed, refer to alternative burner for less, part number SCTB3 for Grand Hall model CGI08ALP.

Part Number: SCTB5 (Replaces Grand Hall P02008032A)
Dimensions: 14 3/4
Material: stainless steel
Weight: 0.7

SCTB3

Click for photos

Stainless steel burner without an electrode tab; if not needed, this is a good replacement burner for burner part numbers 10241 and SCTB5 for Grand Hall model CGI08ALP.

Part Number: SCTB3
Dimensions: 14 3/4
Material: stainless steel
Weight: 1.0

==> All Grand Hall Burners.

CGI08ALP Cooking Grids

P01604013B / 506S3

Click for photos

Stainless steel cooking grid set for Grand Hall model CGI08ALP.

5/16” diameter stainless rods
304 stainless steel

Part Number: 506S3 (Replaces Grand Hall P01604013B)
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1

==> All Grand Hall Cooking Grids.

CGI08ALP Heat Plates

P01708033E / CLA-TS0314

Click for photos

Stainless steel Savor Plate, also known as Flamer Tamer and Heat Plate for Grand Hall model CGI08ALP. Sold individually. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0314 (Replaces Grand Hall P01708033E)
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75

P01708033E / SCHP4

Click for photos

Stainless steel heat plate; also referred to as a flame tamer and savor plate for Grand Hall model CGI08ALP.

Part Number: SCHP4 (Replaces Grand Hall P01708033E)
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0

==> All Grand Hall Heat Plates.

CGI08ALP Igniter Components

P02502265C / IGEIB6-B

Click for photos

Battery powered push button igniter.

Has six (6) spade type male connectors.
Uses 1 AA battery (not supplied)
Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B (Replaces Grand Hall P02502265C)
Weight: 0.3

P02609010B / IG-17B

Click for photos

Stainless steel collector box and ceramic electrode with round connector. Includes mounting nuts and washer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-17B (Replaces Grand Hall P02609010B)
Weight: 0.11

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

10342-T14

Click for photos

21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T14
Dimensions: 21
Weight: 0.05

IG-7B

Click for photos

20” igniter wire with female spade and round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-7B
Weight: 0.02

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-20B

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All Grand Hall Igniter Components.

CGI08ALP Heat indicators and Meat Thermometers

11381

Click for photos

Universal four piece mini thermometer set. Great gift idea.

2 calibrated for steak, and 2 for chicken
Mini thermometers for testing doneness of individual cuts of meat
Silicone bezels for easy removal when hot
Always use caution when handling hot objects

Part Number: 11381
Weight: .25

==> All Grand Hall Heat indicators and Meat Thermometers.

CGI08ALP Accessories

BP-5

Click for photos

Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

FS-1

Click for photos

Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

40538

Click for photos

Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.

Part Number: 40538
Material: chrome steel
Weight: 1.1

41616

Click for photos

Rib & Roast Rack.

Reversible rib rack and roast support. Made of stainless steel with a frame that holds 6 racks of ribs and a roast support for large cuts of meat.

Part Number: 41616
Material: stainless steel
Weight: 0.5

VTC-B

Click for photos

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3

==> All CGI08ALP Accessories.

BBQ Part Categories

Grand Hall grill CGI08ALP - Tuesday, May 12 2026

Return to Grand Hall grills main page

More Grand Hall grill models we have parts for

MG3208SLP | MLS972 | MONARCH04ALP | MONARCH04ANG | MONARCH04BNG | PAT502 | PR364LP | REGAL04ALP | REGAL04ANG | REGAL04CLP | SK472 | SK472B | SK472NG | SMD13ALP | SMD13ANG | SS42 | SS42-B | SS42-B-NG | SS42-SB | SS42-SB-NG | SS42NG | SS454-B-NG | SS50072LP | SS50072NG | SS525LP | SS525NG | SS54 | SS54-LP | SS60884 | SS60884LP | SS60884NG | SS62884LP | SS62884NG | SS64 | SS64-B | SS64-B-NG | SS64-LP | SS64-NG | SS64LP | SS64NG | SS706 | SS706-108 | SS72-B | SS72-LP | SS72-NG | SS72LP | SS72NG | SS73 | STS2611ALP | STS2611ANG | Complete list of Grand Hall grill models...

*Orders for Grand Hall grill model CGI08ALP $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026