GE ZGG27N21C2SS Grill Parts

WB28X10025-R-X2 Cast iron ”H” burners for GE model ZGG27N21C2SS. Set of two (2). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.

Part Number: WB28X10025-R-X2 (Replaces GE WB28X10025-X2)
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 20.0

WB28X10025-R Cast iron ”H” burner with integrated center-fed cast iron venturi for GE model ZGG27N21C2SS. Aftermarket replacement for original burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.

Part Number: WB28X10025-R (Replaces GE WB28X10025)
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 10.3

Premium quality heavy duty stainless steel grill rack for GE model ZGG27N21C2SS. WB49X10019-SS is an aftermarket part that replaces GE original part WB49X10019.

Our USA-made premium stainless grids are simply the best obtainable.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or sleeved carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it. Just look at the weight of one of these grids, over 7pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Dimensions: 19 1/2” x 12 3/4”
• Made in USA.
• Sold individually.

Part Number: WB49X10019-SS-X2 (Replaces GE WB49X10019-X2)
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 7.3

Premium quality heavy duty stainless steel grill rack for GE model ZGG27N21C2SS. WB49X10019-SS is an aftermarket part that replaces GE original part WB49X10019.

Our USA-made premium stainless grids are simply the best obtainable.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or sleeved carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it. Just look at the weight of one of these grids, over 7pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Dimensions: 19 1/2” x 12 3/4”
• Made in USA.
• Sold individually.

Part Number: WB49X10019-SS (Replaces GE WB49X10019)
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 7.3

Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10659 .

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: WB02X10659-R (Replaces GE WB02X10659)
Weight: 0.2

Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10660 .

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: WB02X10660-R (Replaces GE WB02X10660)
Weight: 0.2

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces GE WB21X10013)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Plastic spit rod handle with brass insert.

• Requires bushing BU-1 (5/16” square spit rods) or BU-2 (3/8” square spit rods)
• Will fit our spit rods: SR-5; SR-8; SR-43
• Requires a threaded end on the spit rod
• The mounting hole in the handle is 3/8-16 coarse thread female

Part Number: PH-1 (Replaces GE WB15X10005)
Weight: 0.2

Universal durable battery operated rotisserie motor. Conveniently eliminates the need for electric cords. Runs on 2 D cells (not included).

Part Number: RO-4
Weight: 1.0

Wundersmoke Hickory Chips. These unique hickory wood smoking chips add distinctive hickory wood flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-6
Weight: 1.0

Extra long stainless steel fork with ergonomically correct handles. 20 1/2” long.

Part Number: ITF-2
Dimensions: 20 1/2
Material: stainless steel
Weight: 0.3

GrillPro ® grid lifter removes both cast and stainless cooking grids.

One set of tines to remove cast and another to remove stainless cooking grids.

Stainless tip, resin handle.

Part Number: 76745
Material: stainless
Weight: .2

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.

Part Number: 14913
Material: stailess steel
Weight: 0.5

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3