GE ZGG542NCPSS Grill Parts

General Electric Monogram 54" natural gas grill

Highest quality replacement parts for your GE ZGG542NCPSS - Free USA shipping $49 or more* - No Sales Tax*

GE ZGG542NCPSS owners manual and diagrams

Diagrams & owners manual not available for grill model# ZGG542NCPSS. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for GE model: ZGG542NCPSS

This page shows all of the parts we know fit model GE ZGG542NCPSS. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for GE grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct GE ZGG542NCPSS BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your GE model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

ZGG542NCPSS Burners

Click for photos

304 Stainless steel 15,000 BTU infrared rotisserie burner for GE model ZGG542NCPSS. For use with LP and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for natural gas or LP gas

Dimensions:

Maximum overall length, including mounting tab on one end: 20 7/8”
Maximum width: 3 3/8”

Part Number: CLA-BS0250 (Replaces GE WB02X11429)
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

Click for photos

304 Stainless steel 15,000 BTU infrared rotissierie burner for GE model ZGG542NCPSS. For use with both liquid propane (LP) and natural gas grills. Includes collector box. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for for natural gas or LP.

Dimensions:

Maximum overall length, including mounting tab on one end: 20 7/8”
Maximum width: 3 3/8”

Part Number: CLA-BS0358
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

==> All GE Burners.

ZGG542NCPSS Cooking Grids

Cooking grid not known for GE model ZGG542NCPSS. Our parts information for this grill model is incomplete, and we really don't know with certainty which cooking grid fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the GE cooking grids we carry. If we don't have the exact fit grid for your grill, we may have a suitable replacement part. Measure your existing part as well as the the grid support area of the grill so you'll know exactly what size grids will fit.

If you have this grill model and know the number and dimensions of your original cooking grids, please share this information with us. Click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: CG-DUMMY
Weight: 1.0

==> All GE Cooking Grids.

ZGG542NCPSS Igniter Components

Click for photos

DCS 9 volt spark generator with remote push button. Wiring not included.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB12-B (Replaces GE WB13X10024)
Weight: 0.7

==> All GE Igniter Components.

ZGG542NCPSS Valves, Orifices, and Manifolds

Click for photos

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

==> All GE Valves, Orifices, and Manifolds.

ZGG542NCPSS Accessories

Click for photos

Wundersmoke Hickory Chips. These unique hickory wood smoking chips add distinctive hickory wood flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-6
Weight: 1.0

Click for photos

Extra long stainless steel fork with ergonomically correct handles. 20 1/2” long.

Part Number: ITF-2
Dimensions: 20 1/2
Material: stainless steel
Weight: 0.3

Click for photos

Part Number: 00185
Material: stainless
Weight: .3

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

Click for photos

Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.

Part Number: 98130
Dimensions: 11
Material: porcelain steel
Weight: 1.0

Click for photos

Stainless Steel Ash Cleaning Tray For Use In Ceramic Kamado Grills

Part Number: BRACT
Weight: 1.0

==> All ZGG542NCPSS Accessories.

BBQ Part Categories

GE model ZGG542NCPSS - Tuesday, May 12 2026

Return to GE grills main page

More GE grill models we have parts for
ZGG300NCPSS \| ZGG36L20ASS \| ZGG36L20CSS \| ZGG36L20YSS \| ZGG36L21ASS \| ZGG36L21C2SS \| ZGG36L21CSS \| ZGG36L21YSS \| ZGG36L30ASS \| ZGG36L30CSS \| ZGG36L30YSS \| ZGG36L31ASS \| ZGG36L31C2SS \| ZGG36L31CSS \| ZGG36L31YSS \| ZGG36N20CSS \| ZGG36N20YSS \| ZGG36N21C2SS \| ZGG36N21CSS \| ZGG36N21YSS \| ZGG36N30CSS \| ZGG36N30YSS \| ZGG36N31C2SS \| ZGG36N31CSS \| ZGG36N31YSS \| ZGG420LBP1SS \| ZGG420LBPSS \| ZGG420LCPSS \| ZGG420NBPSS \| ZGG420NCPSS \| ZGG48L30ASS \| ZGG48L30CSS \| ZGG48L30YSS \| ZGG48L31ASS \| ZGG48L31C2SS \| ZGG48L31CSS \| ZGG48L31YSS \| ZGG48L40ASS \| ZGG48L40CSS \| ZGG48L40YSS \| ZGG48L42ASS \| ZGG48L42C2SS \| ZGG48L42CSS \| ZGG48L42YSS \| ZGG48N30CSS \| ZGG48N30YSS \| ZGG48N31C2SS \| ZGG48N31CSS \| ZGG48N31YSS \| ZGG48N40CSS \| Complete list of GE grill models...

More GE grill models we have parts for

Sub-Total	$0.00
Total	$0.00