GE ZGG48N31YSS Grill Parts

Stainless steel smoker burner for GE model ZGG48N31YSS. Fits all DCS grill models originally outfitted with a smoker.

Part Number: 12181 (Replaces GE WB28X10007)
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.7

Burner air shutter for GE model ZGG48N31YSS. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0060 (Replaces GE WB02X10376)
Material: stainless steel
Weight: 0.05

WB28X10008-R-X3 Cast iron ”H” burners for GE model ZGG48N31YSS. Set of three (3). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10008. Meets or exceeds all manufacturer specifications.

Part Number: WB28X10008-R-X3 (Replaces GE WB28X10008-X3)
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 45.60

WB28X10008-R Cast iron ”H” burner with integrated center-fed cast iron venturi for GE model ZGG48N31YSS. Aftermarket replacement for original GE burner part# WB28X10008. Meets or exceeds all manufacturer specifications.

Part Number: WB28X10008-R (Replaces GE WB28X10008)
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 14.0

WB49X10013-R-X3 Porcelain steel Grill Racks for GE model ZGG48N31YSS. SET OF THREE (3). Porcelain enameled, glossy finish. WB49X10013-R is an aftermark replacement part for original GE part WB49X10013.

• Large diameter 3/8” steel rods
• Dimensions: 20 1/2” x 10 3/8”

Part Number: WB49X10013-R-X3 (Replaces GE WB49X10013-X3)
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel wire
Weight: 10.11

WB49X10013-R Porcelain steel Grill Rack for GE model ZGG48N31YSS. Porcelain enameled, glossy finish. WB49X10013-R is an aftermark replacement part for original GE part WB49X10013.

• Large diameter 3/8” steel rods
• Dimensions: 20 1/2” x 10 3/8”
• Sold individually.

Part Number: WB49X10013-R (Replaces GE WB49X10013)
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel wire
Weight: 10.11

Premium quality heavy duty stainless steel grill rack for GE model ZGG48N31YSS. Far superior to the original GE WB49X10013 porcelain steel rack it replaces, this rack is over 10 pounds of solid 304 grade stainless steel and will probably outlast a dozen of the porcelain steel racks.

Our USA-made premium stainless grids are simply the best obtainable. Unlike the standard issue stainless grids generally found today, which are typically low grade stainless, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it.

• 304 commercial grade stainless steel
• Large diameter 3/8” solid stainless rods
• Dimensions: 20 1/2” x 10 3/8”
• Made in USA.
• Sold individually.

Part Number: WB49X10013-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2

WB02X10384-R-X3 Stainless steel heat plate/lava rock support. SET OF THREE (3). Made in USA.

Replaces orininal GE part# WB02X10384.

Part Number: WB02X10384-R-X3 (Replaces GE WB02X10384-X3)
Material: stainless steel
Weight: 2.3

WB02X10384-R Stainless steel heat plate/lava rock support. Made in USA.

Replaces orininal GE part# WB02X10384.

Part Number: WB02X10384-R (Replaces GE WB02X10384)
Material: stainless steel
Weight: 2.3

WB32X10002-R Stainless steel Smoker Burner Tray (sometimes referred to as a Smoker Drawer). Fits many GE Monogram series gas grills.

The overall length of this part, including the handle, is 23 3/4”. The tray, without the handle, measures 2 1/2” X 21 1/2”.

Unassembled. Assembly very easy, just the tray, handle and 8 small nuts and bolts.

This aftermarket part designed to replace original GE part# WB32X10002.

Part Number: WB32X10002-R (Replaces GE WB32X10002)
Dimensions: 23 3/4” x 2 1/2”
Material: stainless steel
Weight: 1.05

DCS Electrode with wire.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-37B (Replaces GE WB07X10084)
Weight: 0.2

Universal two outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-6B (Replaces GE WB03X10016)
Weight: 0.3

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces GE WB21X10013)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Plastic spit rod handle with brass insert.

• Requires bushing BU-1 (5/16” square spit rods) or BU-2 (3/8” square spit rods)
• Will fit our spit rods: SR-5; SR-8; SR-43
• Requires a threaded end on the spit rod
• The mounting hole in the handle is 3/8-16 coarse thread female

Part Number: PH-1 (Replaces GE WB15X10005)
Weight: 0.2

Universal four piece mini thermometer set. Great gift idea.

• 2 calibrated for steak, and 2 for chicken
• Mini thermometers for testing doneness of individual cuts of meat
• Silicone bezels for easy removal when hot
• Always use caution when handling hot objects

Part Number: 11381
Weight: .25

Wundersmoke Hickory Chips. These unique hickory wood smoking chips add distinctive hickory wood flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-6
Weight: 1.0

5-piece unique tennis oriented utensil set. Constructed of heavy stainless steel with ”tennis grips” on each utensil. Includes yellow tennis ball style salt & pepper shakers, along with spatula, fork and tong.

Makes a nice gift.for tennis-minded folks

Part Number: US10
Weight: 5.00

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Stainless steel jalapeno pepper tray.Cook all the heat from a jalapeño and you’re left with a fabulous taste of the southwest that leaves your taste buds singing for hours.

• Constructed of 304 stainless steel
• Measures 9-1/2” x 6-1/2”
• Holds up-to 24 jalapeño peppers
• American-Made

Part Number: JPT
Dimensions: 14 1/4” x 6”
Material: stainless steel
Weight: 0.6

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4