GE ZGG27L21C3SS Grill Parts

WB28X10025-R-X2 Cast iron ”H” burners for GE model ZGG27L21C3SS. Set of two (2). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.

Part Number: WB28X10025-R-X2 (Replaces GE WB28X10025-X2)
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 20.0

WB28X10025-R Cast iron ”H” burner with integrated center-fed cast iron venturi for GE model ZGG27L21C3SS. Aftermarket replacement for original burner part# WB28X10025 . Meets or exceeds all manufacturer specifications.

Part Number: WB28X10025-R (Replaces GE WB28X10025)
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 10.3

Premium quality heavy duty stainless steel grill rack for GE model ZGG27L21C3SS. WB49X10019-SS is an aftermarket part that replaces GE original part WB49X10019.

Our USA-made premium stainless grids are simply the best obtainable.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or sleeved carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it. Just look at the weight of one of these grids, over 7pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Dimensions: 19 1/2” x 12 3/4”
• Made in USA.
• Sold individually.

Part Number: WB49X10019-SS-X2 (Replaces GE WB49X10019-X2)
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 7.3

Premium quality heavy duty stainless steel grill rack for GE model ZGG27L21C3SS. WB49X10019-SS is an aftermarket part that replaces GE original part WB49X10019.

Our USA-made premium stainless grids are simply the best obtainable.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or sleeved carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it. Just look at the weight of one of these grids, over 7pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Dimensions: 19 1/2” x 12 3/4”
• Made in USA.
• Sold individually.

Part Number: WB49X10019-SS (Replaces GE WB49X10019)
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 12 3/4”
Material: stainless steel
Weight: 7.3

Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10659 .

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: WB02X10659-R (Replaces GE WB02X10659)
Weight: 0.2

Complete electrode assembly. Includes electrode, collector box and wire. Aftermarket replacement for original part# WB02X10660 .

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: WB02X10660-R (Replaces GE WB02X10660)
Weight: 0.2

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces GE WB21X10013)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Plastic spit rod handle with brass insert.

• Requires bushing BU-1 (5/16” square spit rods) or BU-2 (3/8” square spit rods)
• Will fit our spit rods: SR-5; SR-8; SR-43
• Requires a threaded end on the spit rod
• The mounting hole in the handle is 3/8-16 coarse thread female

Part Number: PH-1 (Replaces GE WB15X10005)
Weight: 0.2

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.


Part Number: 40269
Material: stainless steel
Weight: 0.14

Universal 6 piece chrome plated skewer set. Designed so food does not rotate. Great for kabobs! 19 1/2” long.

Part Number: SR-7B
Dimensions: 19 1/2
Material: chrome steel
Weight: 1.0

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.

Part Number: 14913
Material: stailess steel
Weight: 0.5

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30