GE ZGG300NBPSS Grill Parts

General Electric Monogram 30" Built-in natural gas grill

Highest quality replacement parts for your GE ZGG300NBPSS - Free USA shipping $49 or more* - No Sales Tax*

GE ZGG300NBPSS owners manual and diagrams

Diagrams & owners manual not available for grill model# ZGG300NBPSS. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for GE model: ZGG300NBPSS

This page shows all of the parts we know fit model GE ZGG300NBPSS. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for GE grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct GE ZGG300NBPSS BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your GE model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

ZGG300NBPSS Burners

Click for photos

304 Stainless steel 15,000 BTU infrared rotisserie burner for GE model ZGG300NBPSS. For use with LP and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for natural gas or LP gas

Dimensions:

Maximum overall length, including mounting tab on one end: 20 7/8”
Maximum width: 3 3/8”

Part Number: CLA-BS0250 (Replaces GE WB02X11422)
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

Click for photos

304 Stainless steel 15,000 BTU infrared rotissierie burner for GE model ZGG300NBPSS. For use with both liquid propane (LP) and natural gas grills. Includes collector box. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for for natural gas or LP.

Dimensions:

Maximum overall length, including mounting tab on one end: 20 7/8”
Maximum width: 3 3/8”

Part Number: CLA-BS0358
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

==> All GE Burners.

ZGG300NBPSS Cooking Grids

Cooking grid not known for GE model ZGG300NBPSS. Our parts information for this grill model is incomplete, and we really don't know with certainty which cooking grid fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the GE cooking grids we carry. If we don't have the exact fit grid for your grill, we may have a suitable replacement part. Measure your existing part as well as the the grid support area of the grill so you'll know exactly what size grids will fit.

If you have this grill model and know the number and dimensions of your original cooking grids, please share this information with us. Click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: CG-DUMMY
Weight: 1.0

==> All GE Cooking Grids.

ZGG300NBPSS Igniter Components

Click for photos

Gas collector box assembly. Includes collector box, ceramic electrode, and wire. Fits both left and right hand side.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-33B (Replaces GE WB02X11425)
Weight: .05

Click for photos

DCS 9 volt spark generator with remote push button. Wiring not included.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB12-B (Replaces GE WB13X10024)
Weight: 0.7

==> All GE Igniter Components.

ZGG300NBPSS Valves, Orifices, and Manifolds

Click for photos

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

==> All GE Valves, Orifices, and Manifolds.

ZGG300NBPSS Heat indicators and Meat Thermometers

Click for photos

Universal four piece mini thermometer set. Great gift idea.

2 calibrated for steak, and 2 for chicken
Mini thermometers for testing doneness of individual cuts of meat
Silicone bezels for easy removal when hot
Always use caution when handling hot objects

Part Number: 11381
Weight: .25

==> All GE Heat indicators and Meat Thermometers.

ZGG300NBPSS Accessories

Click for photos

Apple wood chips.

All natural wood smoke flavor
Great for use in BBQ's or smokers.
170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00230
Weight: 2.0

Click for photos

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Click for photos

Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.

Part Number: 40538
Material: chrome steel
Weight: 1.1

Click for photos

Rib & Roast Rack.

Reversible rib rack and roast support. Made of stainless steel with a frame that holds 6 racks of ribs and a roast support for large cuts of meat.

Part Number: 41616
Material: stainless steel
Weight: 0.5

Click for photos

Stainless Steel Ash Cleaning Tray For Use In Ceramic Kamado Grills

Part Number: BRACT
Weight: 1.0

==> All ZGG300NBPSS Accessories.

BBQ Part Categories

GE model ZGG300NBPSS - Tuesday, May 12 2026

Return to GE grills main page

More GE grill models we have parts for
ZGG27N20YSS \| ZGG27N21C2SS \| ZGG27N21C3SS \| ZGG27N21CSS \| ZGG27N21YSS \| ZGG300LBPSS \| ZGG300LCPSS \| ZGG300NCPSS \| ZGG36L20ASS \| ZGG36L20CSS \| ZGG36L20YSS \| ZGG36L21ASS \| ZGG36L21C2SS \| ZGG36L21CSS \| ZGG36L21YSS \| ZGG36L30ASS \| ZGG36L30CSS \| ZGG36L30YSS \| ZGG36L31ASS \| ZGG36L31C2SS \| ZGG36L31CSS \| ZGG36L31YSS \| ZGG36N20CSS \| ZGG36N20YSS \| ZGG36N21C2SS \| ZGG36N21CSS \| ZGG36N21YSS \| ZGG36N30CSS \| ZGG36N30YSS \| ZGG36N31C2SS \| ZGG36N31CSS \| ZGG36N31YSS \| ZGG420LBP1SS \| ZGG420LBPSS \| ZGG420LCPSS \| ZGG420NBPSS \| ZGG420NCPSS \| ZGG48L30ASS \| ZGG48L30CSS \| ZGG48L30YSS \| ZGG48L31ASS \| ZGG48L31C2SS \| ZGG48L31CSS \| ZGG48L31YSS \| ZGG48L40ASS \| ZGG48L40CSS \| ZGG48L40YSS \| ZGG48L42ASS \| ZGG48L42C2SS \| Complete list of GE grill models...

More GE grill models we have parts for

Sub-Total	$0.00
Total	$0.00