GE ZGG48L31YSS Grill Parts

Stainless steel smoker burner for GE model ZGG48L31YSS. Fits all DCS grill models originally outfitted with a smoker.

Part Number: 12181 (Replaces GE WB28X10007)
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.7

Burner air shutter for GE model ZGG48L31YSS. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0060 (Replaces GE WB02X10376)
Material: stainless steel
Weight: 0.05

WB28X10008-R-X3 Cast iron ”H” burners for GE model ZGG48L31YSS. Set of three (3). Includes integrated center-fed cast iron venturi. Aftermarket replacement for original GE burner part# WB28X10008. Meets or exceeds all manufacturer specifications.

Part Number: WB28X10008-R-X3 (Replaces GE WB28X10008-X3)
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 45.60

WB28X10008-R Cast iron ”H” burner with integrated center-fed cast iron venturi for GE model ZGG48L31YSS. Aftermarket replacement for original GE burner part# WB28X10008. Meets or exceeds all manufacturer specifications.

Part Number: WB28X10008-R (Replaces GE WB28X10008)
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 14.0

WB49X10013-R-X3 Porcelain steel Grill Racks for GE model ZGG48L31YSS. SET OF THREE (3). Porcelain enameled, glossy finish. WB49X10013-R is an aftermark replacement part for original GE part WB49X10013.

• Large diameter 3/8” steel rods
• Dimensions: 20 1/2” x 10 3/8”

Part Number: WB49X10013-R-X3 (Replaces GE WB49X10013-X3)
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel wire
Weight: 10.11

WB49X10013-R Porcelain steel Grill Rack for GE model ZGG48L31YSS. Porcelain enameled, glossy finish. WB49X10013-R is an aftermark replacement part for original GE part WB49X10013.

• Large diameter 3/8” steel rods
• Dimensions: 20 1/2” x 10 3/8”
• Sold individually.

Part Number: WB49X10013-R (Replaces GE WB49X10013)
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel wire
Weight: 10.11

Premium quality heavy duty stainless steel grill rack for GE model ZGG48L31YSS. Far superior to the original GE WB49X10013 porcelain steel rack it replaces, this rack is over 10 pounds of solid 304 grade stainless steel and will probably outlast a dozen of the porcelain steel racks.

Our USA-made premium stainless grids are simply the best obtainable. Unlike the standard issue stainless grids generally found today, which are typically low grade stainless, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best obtainable, you've found it.

• 304 commercial grade stainless steel
• Large diameter 3/8” solid stainless rods
• Dimensions: 20 1/2” x 10 3/8”
• Made in USA.
• Sold individually.

Part Number: WB49X10013-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2

WB02X10384-R-X3 Stainless steel heat plate/lava rock support. SET OF THREE (3). Made in USA.

Replaces orininal GE part# WB02X10384.

Part Number: WB02X10384-R-X3 (Replaces GE WB02X10384-X3)
Material: stainless steel
Weight: 2.3

WB02X10384-R Stainless steel heat plate/lava rock support. Made in USA.

Replaces orininal GE part# WB02X10384.

Part Number: WB02X10384-R (Replaces GE WB02X10384)
Material: stainless steel
Weight: 2.3

WB32X10002-R Stainless steel Smoker Burner Tray (sometimes referred to as a Smoker Drawer). Fits many GE Monogram series gas grills.

The overall length of this part, including the handle, is 23 3/4”. The tray, without the handle, measures 2 1/2” X 21 1/2”.

Unassembled. Assembly very easy, just the tray, handle and 8 small nuts and bolts.

This aftermarket part designed to replace original GE part# WB32X10002.

Part Number: WB32X10002-R (Replaces GE WB32X10002)
Dimensions: 23 3/4” x 2 1/2”
Material: stainless steel
Weight: 1.05

DCS Electrode with wire.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-37B (Replaces GE WB07X10084)
Weight: 0.2

Universal two outlet rotary spark generator. Includes knob and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-6B (Replaces GE WB03X10016)
Weight: 0.3

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces GE WB21X10013)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Plastic spit rod handle with brass insert.

• Requires bushing BU-1 (5/16” square spit rods) or BU-2 (3/8” square spit rods)
• Will fit our spit rods: SR-5; SR-8; SR-43
• Requires a threaded end on the spit rod
• The mounting hole in the handle is 3/8-16 coarse thread female

Part Number: PH-1 (Replaces GE WB15X10005)
Weight: 0.2

Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30