Fiesta FG50069-U409 (2008) Grill Parts

Stainless steel burner (1 inch tube); uses electrode/connector wire IG-27B (original OEM electrode/connector wire cannot be installed on this burner) for Fiesta model FG50069-U409 (2008).

Part Number: FIET1
Dimensions: 15 3/4” x 1”
Material: stainless steel
Weight: 1.0

GRATE SIDE BURNER 500 GRILL (Cast iron, porcelain treated, matte finish for Fiesta model FG50069-U409 (2008). Has no bottom support pegs; just round bottom edge that measures 8 7/8”.)

Part Number: SP165-3
Dimensions: 8 7/8
Material: cast iron
Weight: 1.30

Stainless steel burner support and carryover bracket; replaces OEM # SP53A-20 used in burner assembly # SP114-12. Made in USA

Part Number: CLA-MS0299
Dimensions: 27 1/8
Material: stainless steel
Weight: .5

VENTURI BRACKET 500 GRILL

Part Number: SP51-6
Weight: 1.0

Cast iron cooking grid for Fiesta model FG50069-U409 (2008). Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-66P-CI
Dimension Front-to-Back: 17 1/16”
Dimension Side-to-Side: 9 1/16”
Material: cast iron
Weight: 4.95

Heat Plate/ Flame Tamer not known for Fiesta model FG50069-U409 (2008). Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

Battery powered push button igniter.

• Has six (6) spade type male connectors.
• Uses 1 AA battery (not supplied)
• Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B
Weight: 0.3

ELECTRODE SIDE BURNER 500 *

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: SP56-20
Weight: 0.1

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Electrode with wire for Fiesta Grills; use with burner FIET1.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-27B
Weight: 0.2

Stainless steel grease tray assembly; replaces discontinued OEM # SP244-9. Unassembled, consisting of 8 tray pieces, grease pan/cup holder with (3) mini aluminum loaf pans (not shown in photos), plus hardware and installation instructions. Made in USA.

Part Number: SP244-9-R
Dimensions: 9 1/8” x 20 1/8”
Material: stainless steel
Weight: 3.0

Knob for side burner and rotisserie burner 500 GRILL

Part Number: SP16-7
Weight: 0.1

TOWEL BAR HANDLE 500

Part Number: SP55-19
Weight: 1.0

BRACKET GREASE RAIL RHS

Part Number: SP155-6
Weight: 0.05

COVER PLUG

Part Number: SP43-33
Weight: 1.0

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Porcelain Coated Grill Topper.
11” x 16” Single draw construction for improved rigidity. Stainless steel handles and raised contours for improved functionality.

Part Number: 97122
Dimensions: 16” x 11 1/2”
Material: porcelain steel
Weight: 1.10

Stainless Steel Ash Cleaning Tray For Use In Ceramic Kamado Grills

Part Number: BRACT
Weight: 1.0