Fiesta 24025-913 Grill Parts

Stainless steel burner and venturi and creamic electrode and wire assembly for Fiesta 240 series grills for Fiesta model 24025-913. Measurements of the burner are 13 7/8” x 3 1/2” and the venturi tubes are 2 5/8” tall by 6 1/8” long. This part is also the factory replacement for burner SM164A12.

Part Number: SM191A-12
Dimensions: 3 1/2” x 13 7/8”
Material: stainless steel
Weight: 1.22

Genuine OEM Fiesta porcelain steel cooking grid for Fiesta model 24025-913.

• Porcelain enameled, glossy finish.
• Sold individually.
• Fits 240 series grills, others

Note: This is also a factory replacement for part SP124-3, which has been discontinued.
This part is currently out of stock, but more are already on the way and expected to arrive early Nov

Part Number: SP124A-3
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 7/8”
Material: porcelain steel
Weight: 2.36

Chrome plated cooking grid for Fiesta model 24025-913. Made in USA.

Part Number: CG-31
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 1/2”
Material: Chrome steel
Weight: 2.1

Stainless steel Heat Plate; also known as a Flame Tamer and Smart Bar for Fiesta model 24025-913. OEM version made of aluminized steel. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.


Part Number: CLA-TS0324
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 3/16”
Material: stainless steel
Weight: 1.6

Genuine OEM Fiesta snap-on electrode, wire, and collector box assembly.

Note: This part does not fit our after-market burners such as 19002.

This part only fits OEM Fiesta burners. OEM Fiesta burner part numbers usually start with letters SM and SP).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: SP5016-20
Weight: 0.05

Push button igniter. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-21
Weight: 0.05

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.

Part Number: S15111
Material: stainless steel
Weight: 0.02

Mini grease bucket used with wire holder S15111.

Part Number: S15112
Weight: .03

KNOB VALVE LARGE

Part Number: SP11-7
Weight: 0.1

Wheel 6” plastic with 3/8” axle hole.

Part Number: 10892-608
Weight: 0.2

Genuine OEM Fiesta chrome warming rack.

Part Number: SP5021-3
Material: chrome steel
Weight: 1.15

LOGO GUAGE FIESTA A/T LID

Part Number: SP23A-30
Weight: 0.5

HEAT SHIELD FIESTA 240/300 -- (2011)

Part Number: SM5069-9
Dimensions: 8 3/8” x 18 3/8”
Weight: 1.46

Hinge pin clip.

Part Number: S21233
Weight: 0.01

LEG EXTENSION OFF-SET

Part Number: 11494-148
Weight: 0.05

GrillPro Wood chips from genuine oak whiskey barrels.

• All natural wood smoke flavor
• Great for use in BBQ's or smokers.
• 170 cubic inches (2 lbs. approx) in resealable bag

Try with beef, burgers, pork, lamb, poultry, and fish.

Part Number: 00215
Weight: 2.0

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.

Part Number: 40538
Material: chrome steel
Weight: 1.1

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

Roast holder. This holder is an ideal way to cook and also carry a roast from the grill. Made of heavy, bright nickel-plated steel, 15 1/4” L x 10 1/2” W.

Part Number: RR-3
Dimensions: 19 1/2
Weight: 1.0

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.2