DCS BGB30-BQR-L Grill Parts

304 Stainless steel 15,000 BTU infrared rotisserie burner for DCS model BGB30-BQR-L. For use with LP and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for natural gas or LP gas

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0250 (Replaces DCS DCS-210357)
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

210617-R TUBE BURNER BBQ 30 or U BURNER EDV GRILLS for DCS model BGB30-BQR-L.
Premium quality stainless steel tube burner.

FIts older BGB30 and BGC30 series grills. Relaces original DCS part# 210617.

Part Number: DCS-210617-R (Replaces DCS DCS-210617)
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

304 Stainless steel 15,000 BTU infrared rotissierie burner for DCS model BGB30-BQR-L. For use with both liquid propane (LP) and natural gas grills. Includes collector box. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for for natural gas or LP.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0358
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

212925-R RACK GRILL BGB30 or GRILL RACK O1 BGB30 for DCS model BGB30-BQR-L.

Premium quality, heavy duty stainless steel grill rack. Fits DCS BGB30 and BGC30 Professional Series gas grills.

• Replaces DCS factory part# 212925.
• Made of commercial grade polished 304 stainless steel rods.
• Large diameter 5/16” solid stainless rods.
• Meets or exceeds all specifications of the original factory part.
• Made in USA.
• Sold individually.

 Special feature

This part, like the original high quality OEM grill rack it replaces, is electroplated, a special electrochemical bath that removes impurities in the surface of the stainless steel and produces a nice polished finish that is more resistant to rust and corrosion. Due to it's extra manufacturing cost, it is typically not found on other aftermarket cooking grids/grates.

NOTE: This part will fit all DCS/Fisher and Paykel grill models that use a 21 1/2” x 12 7/8” grill rack/cooking grid.

Part Number: DCS-212925-R (Replaces DCS DCS-212925)
Dimension Front-to-Back: 21 1/2”
Dimension Side-to-Side: 12 7/8”
Material: stainless steel
Weight: 8.5

212926-R RACK GRILL BGB30 or GRILL RACK O2 BGB30 for DCS model BGB30-BQR-L.

Premium quality, heavy duty stainless steel grill rack. Fits DCS BGB30 and BGC30 Professional Series gas grills. 212926-R has the grid lifter hole.

• Replaces DCS factory part# 212926.
• Made of commercial grade polished 304 stainless steel rods.
• Large diameter 5/16” solid stainless rods.
• Meets or exceeds all specifications of the original factory part.
• Made in USA.
• Sold individually.

 Special feature

This part, like the original high quality OEM grill rack it replaces, is electroplated, a special electrochemical bath that removes impurities in the surface of the stainless steel and produces a nice polished finish that is more resistant to rust and corrosion. Due to it's extra manufacturing cost, it is typically not found on other aftermarket cooking grids/grates.

NOTE: This part will fit all DCS/Fisher and Paykel grill models that use a 21 1/2” x 12 7/8” grill rack/cooking grid.

Part Number: DCS-212926-R (Replaces DCS DCS-212926)
Dimension Front-to-Back: 21 1/2”
Dimension Side-to-Side: 12 7/8”
Material: stainless steel
Weight: 8.5

245398-R Ceramic Radiant Rods. Sometimes called CERAMIC ROD 9.50 (PKD).
Ceramic radiant rods. 18 count. Fits many DCS Professional Series grills.

• Replaces factory part# 245398
• Round ceramic rods are 9.5” long and 9/16” in diameter
• Sold as a package of 18 rods

Also available in a package of three. See part# CLA-MC0357.

Part Number: DCS-245398-R (Replaces DCS DCS-245398)
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 2.3

214419-R HOUSING RADIANT BGB30.
Stainless steel Radiant. Fits BGB30 Professional Series grills by Fischer & Pakel.

• Replaces factory part# 214419
• Includes 3214420 Lock Radiant & Hardware
• Premium grade 304 stainless steel
• Holds 18 ceramic rods
• Sold individually, number required varies by grill

Part Number: DCS-214419-R (Replaces DCS DCS-214419)
Dimensions: 18 5/8” x 9 7/8”
Material: stainless steel
Weight: 3.3

Ceramic radiant rods, package of three.

Part Number: CLA-MC0357
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 0.6

Gas collector box assembly. Includes collector box, ceramic electrode, and wire. Fits both left and right hand side.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-33B (Replaces DCS DCS-214293)
Weight: .05

212333-R BATTERY IGN MODULE 9V ELTEC 4.
9 volt spark generator with remote push button. Fits BG27, BGA27 and BGB30 series Professional grills that require a 4 outlet igniter.

• Replaces factory part 212333
• Includes 212336 Igniter switch (button)
• Requires 9V battery (not included)
• Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-212333-R (Replaces DCS DCS-212333)
Weight: 0.40

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces DCS DCS-239862P)
Weight: 0.8

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces DCS DCS-250072)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Universal durable battery operated rotisserie motor. Conveniently eliminates the need for electric cords. Runs on 2 D cells (not included).

Part Number: RO-4
Weight: 1.0

GrillPro Texas hickory BBQ wood chips. 800g. For use in all BBQ Grill and smoker applications.

Part Number: 00220
Weight: 2.0

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.

Part Number: 40538
Material: chrome steel
Weight: 1.1

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.

Part Number: 14913
Material: stailess steel
Weight: 0.5

Stuffed Burger Press

The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.

Part Number: 24795
Weight: .3