DCS DCS36-BQARS Grill Parts

Highest quality replacement parts for your DCS DCS36-BQARS - Free USA shipping $49 or more* - No Sales Tax*

DCS DCS36-BQARS owners manual and diagrams

Diagrams & owners manual not available for grill model# DCS36-BQARS. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the DCS model: DCS36-BQARS

All of the parts we have for DCS DCS36-BQARS are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for DCS grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct DCS DCS36-BQARS BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your DCS model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

DCS36-BQARS Burners

DCS-210357 / CLA-BS0250

Click for photos

304 Stainless steel 15,000 BTU infrared rotissierie burner for DCS model DCS36-BQARS. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

Maximum overall length, including mounting tab on one end: 20 7/8”
Maximum width: 3 3/8”

Part Number: CLA-BS0250 (Replaces DCS DCS-210357)
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

DCS-213466 / DCS-213466-R1

Click for photos

213466 SMOKER BRNR ASSY for DCS model DCS36-BQARS.

Stainless steel replacement smoker burner. Fits DCS DCS36, DCS36A, DCS48, DCS48A Professional Series grills. Replaces original DCS part# 213466.

.

Part Number: DCS-213466-R1 (Replaces DCS DCS-213466)
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.7

DCS-210348 / DCS-210348-R2

Click for photos

210348-RBURNER H 36/48 MAT PORC for DCS model DCS36-BQARS.
Cast iron replacement ”H” burner. Fits older DCS 36” and 48” Professional Series grills.

Replaces original DCS burner part# 210348.

NOTE: Also fits grills manufactured by Dynamic Cooking Systems (DCS) for other brands.

Includes Air Shutter part# DCS-210330-R.

Part Number: DCS-210348-R2 (Replaces DCS DCS-210348)
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 15.2

DCS-210330 / DCS-210330-R

Click for photos

210330-R Air shutter for DCS model DCS36-BQARS. Fits cast iron ”H” burners used on older DCS 27”, 36” and 48” Professional Series grills.

Replaces original DCS part# 210330.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Made in USA.

Part Number: DCS-210330-R (Replaces DCS DCS-210330)
Material: stainless steel
Weight: 0.05

==> All DCS Burners.

DCS36-BQARS Cooking Grids

DCS-212408 / DCS-212408-R

Click for photos

212408-R GRILL RACK - 36/48 BBQ-BLK for DCS model DCS36-BQARS.

Heavy duty porcelain steel grill rack. Fits DCS36, DCS36A, DCS48, and DCS48A Professional Series gas grills.

Replaces DCS factory part# 212408.
Large diameter 5/16” porcelain steel rods.
Sold individually.

Part Number: DCS-212408-R (Replaces DCS DCS-212408)
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel
Weight: 10.11

==> All DCS Cooking Grids.

DCS36-BQARS Rock/Briquette Grates

DCS-213949 / DCS-213949-R

Click for photos

213949-R RADIANT W/A 36/48 BQ.
Stainless steel Lava Rock support. Fits DCS DCS36, DCS36A, DCS48, DCS48A Professional Series grills. These grills have the larger 20.5” cast iron H burners.

Replaces original DCS part# 213949.

Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA
Sold individually, number required varies

Part Number: DCS-213949-R (Replaces DCS DCS-213949)
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 9 9/16”
Material: stainless steel
Weight: 2.2

DCS-210005-R

Click for photos

210005-R LAVA ROCK.
Natural lava rock processed and screened for uniformity. For use with Support Rack/Radient 213524 and 213949.

NOTE: This is NOT a DCS product. The original DCS part was 4 pounds of Lava Rock. This is a 7lb bag manufactured by GrillPro.

Part Number: DCS-210005-R
Material: pumice
Weight: 7.5

==> All DCS Rock/Briquette Grates.

DCS36-BQARS Igniter Components

DCS-211551 / UP-4B

Click for photos

Universal push-button igniter. Round male connector. Includes locking nut.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-4B (Replaces DCS DCS-211551)
Weight: 0.3

DCS-210730 / IG-37B

Click for photos

DCS Electrode with wire.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-37B (Replaces DCS DCS-210730)
Weight: 0.2

IG-46B

Click for photos

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

==> All DCS Igniter Components.

DCS36-BQARS Regulators and Hoses

DCS-210819 / HR-4B

Click for photos

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces DCS DCS-210819)
Dimensions: 22
Weight: 0.8

==> All DCS Regulators and Hoses.

DCS36-BQARS Valves, Orifices, and Manifolds

DCS-210733 / 30171

Click for photos

Brass valve for DCS.

For LP and natural gas grills (see below)
Off position D-Value: 12 o'clock
Stem diameter: 8mm
Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces DCS DCS-210733)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

CLA-VL0251

Click for photos

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

==> All DCS Valves, Orifices, and Manifolds.

DCS36-BQARS Rotisserie components

RO-4

Click for photos

Universal durable battery operated rotisserie motor. Conveniently eliminates the need for electric cords. Runs on 2 D cells (not included).

Part Number: RO-4
Weight: 1.0

==> All DCS Rotisserie components.

DCS36-BQARS Accessories

BP-5

Click for photos

Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

FS-1

Click for photos

Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

24785

Click for photos

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

14913

Click for photos

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.

Part Number: 14913
Material: stailess steel
Weight: 0.5

VTC-B

Click for photos

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3

==> All DCS36-BQARS Accessories.

BBQ Part Categories

DCS grill model DCS36-BQARS - Tuesday, Oct 7 2025

Return to DCS grill parts main page

More DCS grill models we have parts for

BG48-BQARN | BG48-BQARN (pre 2006) | BG48-BQRL | BG48-BQRL (pre 2006) | BG48-BQRN | BG48-BQRN (pre 2006) | BGA26-BQ | BGA26-BQ (pre 2006) | BGA26-BQL | BGA26-BQL (pre 2006) | BGA26-BQN | BGA26-BQN (pre 2006) | BGA27-BQ | BGA27-BQ (pre 2006) | BGA27-BQL | BGA27-BQL (pre 2006) | BGA27-BQN | BGA27-BQN (pre 2006) | BGA27-BQR | BGA27-BQR (pre 2006) | BGA27-BQRL | BGA27-BQRL (pre 2006) | BGA27-BQRN | BGA27-BQRN (pre 2006) | BGA36-BQAR | BGA36-BQAR (pre 2006) | BGA36-BQARL | BGA36-BQARL (pre 2006) | BGA36-BQARN | BGA36-BQARN (pre 2006) | BGA48-BQAR | BGA48-BQAR (pre 2006) | BGA48-BQARL | BGA48-BQARL (pre 2006) | BGA48-BQARN | BGA48-BQARN (pre 2006) | BGA48-BQR | BGA48-BQR (pre 2006) | BGA48-BQRL | BGA48-BQRL (pre 2006) | BGA48-BQRN | BGA48-BQRN (pre 2006) | BGB30-BQR | BGB30-BQR (pre 2006) | BGB30-BQR-L | BGB30-BQR-N | BGB30-BQRL | BGB30-BQRL (pre 2006) | BGB30-BQRN | BGB30-BQRN (pre 2006) | Complete list of DCS grill models...

*Orders for DCS grill model DCS36-BQARS $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: Oct 7 2025