DCS BGB30-BQR (pre 2006) Grill Parts

12285-R Tube burner for DCS model BGB30-BQR (pre 2006).
Premium quality stainless steel replacement burner. Fits older BGB30 series grills by Dynamic Cooking Systems.

Replaces original DCS part# 12285.

Part Number: DCS-12285-R (Replaces DCS DCS-12285)
Dimensions: 19 1/4” x 6”
Material: stainless steel
Weight: 3.9

304 Stainless steel 15,000 BTU infrared rotisserie burner for DCS model BGB30-BQR (pre 2006). For use with LP and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for natural gas or LP gas

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0250 (Replaces DCS DCS-12021-02)
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

304 Stainless steel 15,000 BTU infrared rotissierie burner for DCS model BGB30-BQR (pre 2006). For use with both liquid propane (LP) and natural gas grills. Includes collector box. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for for natural gas or LP.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0358
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

19503-01-R Grate BGB30 for DCS model BGB30-BQR (pre 2006).

Premium quality, heavy duty stainless steel grill rack. Fits BGB30 and BGC30 Professional Series gas grills by Dynamic Cooking Systems (DCS). Sometimes referred to as Grate BGB30. Part 19503-01 has no grid lifter hole.

• Replaces DCS factory part# 19503-01.
• Made of commercial grade polished 304 stainless steel.
• Large diameter 5/16” solid stainless rods.
• Meets or exceeds all specifications of the original factory part.
• Made in USA.
• Sold individually.

 Special feature

This part, like the original high quality OEM grill rack it replaces, is electroplated, a special electrochemical bath that removes impurities in the surface of the stainless steel and produces a nice polished finish that is more resistant to rust and corrosion. Due to it's extra manufacturing cost, it is typically not found on other aftermarket cooking grids/grates.

NOTE: This part will fit all DCS/Fisher and Paykel grill models that use a 21 1/2” x 12 7/8” grill rack/cooking grid.

Part Number: DCS-19503-01-R (Replaces DCS DCS-19503-01)
Dimension Front-to-Back: 21 1/2”
Dimension Side-to-Side: 12 7/8”
Material: stainless steel
Weight: 8.5

19503-02-R Grate BGB30 for DCS model BGB30-BQR (pre 2006).

Premium quality, heavy duty stainless steel grill rack. Fits BGB30 and BGC30 Professional Series gas grills by Dynamic Cooking Systems (DCS). Sometimes referred to as Grate BGB30. Part 19503-02 has a grid lifter hole.

• Replaces DCS factory part# 19503-02.
• Made of commercial grade polished 304 stainless steel.
• Large diameter 5/16” solid stainless rods.
• Meets or exceeds all specifications of the original factory part.
• Made in USA.
• Sold individually.

 Special feature

This part, like the original high quality OEM grill rack it replaces, is electroplated, a special electrochemical bath that removes impurities in the surface of the stainless steel and produces a nice polished finish that is more resistant to rust and corrosion. Due to it's extra manufacturing cost, it is typically not found on other aftermarket cooking grids/grates.

NOTE: This part will fit all DCS/Fisher and Paykel grill models that use a 21 1/2” x 12 7/8” grill rack/cooking grid.

Part Number: DCS-19503-02-R (Replaces DCS DCS-19503-02)
Dimension Front-to-Back: 21 1/2”
Dimension Side-to-Side: 12 7/8”
Material: stainless steel
Weight: 8.5

33248-R Radiant Assembly BGB30.
Stainless steel Housing Radiant housing/Tray assembly. Fits BGB30 Professional Series grills grills by Dynamic Cooking Systems.

Includes:
• 33246 Radiant Cap
• 33245 Radiant

• Replaces factory part# 33248
• Premium grade 304 stainless steel
• Holds 18 ceramic rods (not included)
• Sold individually

Part Number: DCS-33248-R (Replaces DCS DCS-33248)
Dimensions: 18 5/8” x 9 7/8”
Material: stainless steel
Weight: 3.3

32224-R Ceramic Radiant Rods. Sometimes called CERAMIC ROD 9.50 (PKD).
Ceramic rods for radiant tray. 18 count. Fits many DCS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 32224
• Round ceramic rods are 9.5” long and 9/16” in diameter
• Sold as a package of 18 rods

Also available in a package of three. See part# CLA-MC0357.

Part Number: DCS-32224-R (Replaces DCS DCS-32224)
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 2.3

Ceramic radiant rods, package of three.

Part Number: CLA-MC0357
Dimensions: 9 1/2” x 9/16”
Material: ceramic
Weight: 0.6

Gas collector box assembly. Includes collector box, ceramic electrode, and wire. Fits both left and right hand side.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-33B (Replaces DCS DCS-32801)
Weight: .05

18350-R IGNITION MODULE 4 OUTPUTS (BQR MOD).
9 volt spark generator with remote push button. Fits BG27, BGA27 and BGB30 series Professional grills that require a 4 outlet igniter.

• Replaces factory part 18350
• Includes 18353 Ignition button
• Requires 9V battery (not included)
• Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-18350-R (Replaces DCS DCS-18350)
Weight: 0.40

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces DCS DCS-13230)
Weight: 0.8

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces DCS DCS-13017)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Universal four piece mini thermometer set. Great gift idea.

• 2 calibrated for steak, and 2 for chicken
• Mini thermometers for testing doneness of individual cuts of meat
• Silicone bezels for easy removal when hot
• Always use caution when handling hot objects

Part Number: 11381
Weight: .25

GrillPro Wood chips from genuine oak whiskey barrels.

• All natural wood smoke flavor
• Great for use in BBQ's or smokers.
• 170 cubic inches (2 lbs. approx) in resealable bag

Try with beef, burgers, pork, lamb, poultry, and fish.

Part Number: 00215
Weight: 2.0

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Dimensions: 16” x 4”
Material: chrome steel
Weight: 0.9

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Stainless steel jalapeno pepper tray.Cook all the heat from a jalapeño and you’re left with a fabulous taste of the southwest that leaves your taste buds singing for hours.

• Constructed of 304 stainless steel
• Measures 9-1/2” x 6-1/2”
• Holds up-to 24 jalapeño peppers
• American-Made

Part Number: JPT
Dimensions: 14 1/4” x 6”
Material: stainless steel
Weight: 0.6

Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2