Jenn-Air Burners

Commercial premium grade stainless steel burner.


Part Number: VTB1
Dimensions: 17
Material: stainless steel
Weight: 1.0

VTB1 fits these 6 Jenn-Air models:
JA460 JA460P	JA461 JA461P	JA480 JA580

Stainless Steel Burner For Tuscany & Perfect Flame Gill Models

Part Number: TUST1
Dimensions: 17 7/8
Material: stainless steel
Weight: 1.0

TUST1 fits this one Jenn-Air model:
JA38

Rotisserie burner. Orifice and fitting not included. Best if used with original orifice and fitting. (If a new orifice and fitting is needed, please indicate that during check-out in the comment section.)
This part is currently out of stock, but more are already on the way and expected to arrive SPRING 24

Part Number: SBB00061
Dimensions: 3 1/4” x 12 3/8”
Weight: 2.0

SBB00061 fits these 3 Jenn-Air models:
720-0061	720-0061-LP	720-0062-LP

Burner made of commercial 304 grade stainless steel. Sold individually, number required varies by grill.

Part Number: JATB1
Dimensions: 15 7/8” x 4 1/2”
Material: stainless steel
Weight: 0.7

JATB1 fits these 13 Jenn-Air models:
720-0336 720-0337 720-0339	720-0511 720-0512 720-0727	730-0336 730-0337 730-0339	740-0593 740-0594 750-0593	750-0594

Burner mounting plate. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.

• Sold individually, number required varies. Use one per burner.
• Includes mounting bolt and nut
• Includes extra holes for mounting to grill, if necessary.
• Comes with complete installation instructions.

For models:

• CF9080/85/86
• VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
• VCS3507/4007/5007/3507BI/5007BI

Made in USA

Part Number: CLA-MS0227
Dimensions: 3 3/4” x 4 15/16”
Material: stainless steel
Weight: 0.11

CLA-MS0227 fits these 6 Jenn-Air models:
JA460 JA460P	JA461 JA461P	JA480 JA580

304 Stainless steel 15,000 BTU infrared rotissierie burner. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0250
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

304 Stainless steel Infrared rear rotisserie burner with ceramic wafer. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 17”
• Maximum width: 3 3/8”
• Burner box 15 3/8” x 3 3/8”
• Mounting holes: 16 1/8” on center

Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

CLA-BL0229 fits these 7 Jenn-Air models:
720-0062-LP 720-0141-LP	720-0164 720-0171	720-0337 720-0339	740-0141

Cast iron burner.

Part Number: CIT
Dimensions: 15 3/4” x 2 7/8”
Material: cast iron
Weight: 4.2

CIT fits these 15 Jenn-Air models:
720-0061 720-0061-LP 720-0062-LP	720-0063-LP 720-0099-NG 720-0100-NG	720-0101-NG 720-0138-NG 720-0139-NG	720-0141-LP 720-0142-LP 720-0150-LP	720-0151-NG 740-0165 750-0165

Cast iron burner.


Part Number: CIJA
Dimensions: 15 3/4” x 2 1/4”
Material: cast iron
Weight: 3.4

CIJA fits these 9 Jenn-Air models:
720-0163 720-0164	720-0165 720-0171	720-0671 730-0163	730-0164 730-0165	730-0171

Cast iron burner and venturi assembly.

Part Number: CIDYN
Dimensions: 18” x 7 3/4”
Material: cast iron
Weight: 10.0

CIDYN fits these 11 Jenn-Air models:
JBQ30FL JBQ30FN JBQ30L	JBQ30N JBQ42FL JBQ42FN	JBQ42L JBQ42N JBQ54L	JBQ54N JLG7130ADS

Cast stainless steel burner. Tired of changing out rusted cast iron burners? Far superior to the cast iron and brass versions, this burner will probably outlast your grill. Designed to replace cast iron and brass burners of same design.

NOTE: This burner is equiped with an air intake adjustable control shutter (not shown in photos) and with an air intake control screw for regulating the air/gas mixture into the burner. Natural gas applications require more air (more open screw) than lquid propane (LP). If necessary, adjust screw to get a yellow-tipped blue flame.

Part Number: 23301-CSS
Dimensions: 16” x 2 7/16”
Material: cast stainless steel
Weight: 3.2

23301-CSS fits these 15 Jenn-Air models:
720-0061 720-0061-LP 720-0062-LP	720-0063-LP 720-0099-NG 720-0100-NG	720-0101-NG 720-0138-NG 720-0139-NG	720-0141-LP 720-0142-LP 720-0150-LP	720-0151-NG 740-0165 750-0165

Burner mounting plate. This part is used to reinforce the front grill housing so the burner can be mounted to the grill. In some cases, the grill housing has rusted or corroded such that the burner cannot be properly mounted to the front of the grill.

• Premium grade stainless steel
• Includes gasket and mounting screw
• Comes with complete installation instructions
• Sold individually.

For models:

• CF9080/85/86
• VCS300/3500/35BI/4000/4005/5000/5005/5010/50BI
• VCS3507/4007/5007/3507BI/5007BI

Part Number: 03501
Dimensions: 3 3/4” x 4”
Material: stainless steel
Weight: 0.16

03501 fits these 6 Jenn-Air models:
JA460 JA460P	JA461 JA461P	JA480 JA580