Kenmore 122.16641900 Grill Parts

Highest quality replacement parts for your Kenmore 122.16641900 - Free USA shipping $49 or more* - No Sales Tax*

Kenmore 122.16641900 owners manual and diagrams

Diagrams & owners manual not available for grill model# 122.16641900. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement BBQ grill parts for Kenmore model: 122.16641900

On this page you'll find all of the parts that fit model Kenmore 122.16641900. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a warming rack and there are none here, click the warming rack button to see all of the racks we have for Kenmore grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Kenmore 122.16641900 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Kenmore model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

122.16641900 Burners

10000652A0 / CBP6

Click for photos

Stainless steel burner for Kenmore model 122.16641900.

Part Number: CBP6 (Replaces Kenmore 10000652A0)
Dimensions: 14 3/8” x 1”
Material: stainless steel
Weight: 1.0

NGKT1

Click for photos

Stainless steel burner for Kenmore model 122.16641900.

Part Number: NGKT1
Dimensions: 14 7/8” x 1”
Material: stainless steel
Weight: 1.0

==> All Kenmore Burners.

122.16641900 Cooking Grids

13000123A0 / 61192

Click for photos

Cast iron cooking grids for Kenmore model 122.16641900. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 61192 (Replaces Kenmore 13000123A0)
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 26 1/2”
Material: matte cast iron
Weight: 12.10

==> All Kenmore Cooking Grids.

122.16641900 Heat Plates

CLA-TS0153-X4

Click for photos

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for Kenmore model 122.16641900. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0153-X4
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 5/8”
Material: stainless steel
Weight: 3.2

NGKHP3

Click for photos

Stainless steel Flame Tamer for Kenmore model 122.16641900.

Part Number: NGKHP3
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 1.0

==> All Kenmore Heat Plates.

122.16641900 Igniter Components

10000175A0 / 04430

Click for photos

Burner mounted electrode for use with 15591 and 15491 burners.

39” wire with female spade connector
Includes adapter wire part 03198 for applications needing male spade connector on electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04430 (Replaces Kenmore 10000175A0)
Material: ceramic
Weight: 0.1

03750

Click for photos

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

04432

Click for photos

Electrode with 24.5” wire that has a female spade/flat end. To lengthen the wire use adapter # 03198 and extension wire # 03750.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04432
Dimensions: 4”
Material: ceramic
Weight: 0.1

01190

Click for photos

Replacement electrode.

Ceramic insulator
25” wire with female spade connector
Locking nuts.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 01190
Material: ceramic
Weight: 0.2

IG-46B

Click for photos

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

IGEIB6-B

Click for photos

Battery powered push button igniter.

Has six (6) spade type male connectors.
Uses 1 AA battery (not supplied)
Requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB6-B
Weight: 0.3

IG-19B

Click for photos

Burner-mounted ceramic electrode, wire, and mounting bracket.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-19B
Weight: 0.1

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

==> All Kenmore Igniter Components.

122.16641900 Accessories

BP-6

Click for photos

Wundersmoke Hickory Chips. These unique hickory wood smoking chips add distinctive hickory wood flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-6
Weight: 1.0

ITF-2

Click for photos

Extra long stainless steel fork with ergonomically correct handles. 20 1/2” long.

Part Number: ITF-2
Dimensions: 20 1/2
Material: stainless steel
Weight: 0.3

11040

Click for photos

7” Bamboo BBQ Kabobs. Appetizer Server/Grilling Skewers - pack of 50. Limited to supplies on hand.

Ideal for searving or grilling appetizers
Wide end for easy handling

Part Number: 11040
Dimensions: 7
Weight: 0.4

42055

Click for photos

Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.

Part Number: 42055
Dimensions: 13
Weight: 0.2

98121

Click for photos

Porcelain Coated Square Wok Topper.
12” x 12” x 2” porcelain coated grilling wok with stainless steel handles and perforations. The single draw design improves functionality and rigidity, it also makes it much easier to clean.

Part Number: 98121
Dimensions: 12” x 12”
Material: porcelain steel
Weight: 1.6

BRGG

Click for photos

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0

==> All 122.16641900 Accessories.

BBQ Part Categories

Kenmore gas grill 122.16641900 - Tuesday, May 12 2026

Return to Kenmore grills main page

More Kenmore grill models we have parts for

141.15227 | 141.152270 | 141.152271 | 141.15337 | 141.153370 | 141.153371 | 141.153372 | 141.153373 | 141.15401 | 141.1554 | 141.155400 | 141.155401 | 141.15640 | 141.156400 | 141.15790 | 141.157900 | 141.157901 | 141.157902 | 141.15794 | 141.157940 | 141.157941 | 141.15795 | 141.157950 | 141.157951 | 141.15798 | 141.157980 | 141.157981 | 141.15799 | 141.157990 | 141.157991 | 141.16123 | 141.16221 | 141.16223 | 141.162231 | 141.16225 | 141.16226 | 141.16228 | 141.16233 | 141.16235 | 141.16306 | 141.16313 | 141.16313800 | 141.16315 | 141.16315800 | 141.16321 | 141.163211 | 141.16322 | 141.16323 | 141.163231 | 141.16324 | Complete list of Kenmore grill models...

*Orders for Kenmore grill model 122.16641900 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026