GrillPro 30030-013 Grill Parts

Stainless steel twin oval burner and venturi assembly for GrillPro model 30030-013. Fits some Broil-Mate and Fiesta 300 series grills. Measurments of burner 13 7/8” x 3 1/2” venturi tubes are 2 5/8” tall by 7 1/8” long. Includes:

• SS Oval burner
• Two (2) twist-in venturis with integrated spider guards
• Ceramic electrode and wire

This part is currently out of stock, but more are already on the way and expected to arrive unknown per manufacturer

Part Number: SM190A-12
Dimensions: 3 1/2” x 13 7/8”
Material: stainless steel
Weight: 1.3

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

Genuine OEM GrillPro porcelain steel cooking grid for GrillPro model 30030-013.

Note: This is also a factory replacement for part SP43-3, which has been discontinued.

Part Number: SP43A-3
Dimension Front-to-Back: 13 1/4”
Dimension Side-to-Side: 21 3/8”
Material: porcelain steel
Weight: 3.0

Stainless steel Heat Plate; also known as a Flame Tamer and Smart Bar for GrillPro model 30030-013. OEM version made of aluminized steel. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.


Part Number: CLA-TS0324
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 3/16”
Material: stainless steel
Weight: 1.6

Genuine OEM GrillPro snap-on electrode, wire, and collector box assembly.

Note: This part does not fit our after-market burners such as 19002.

This part only fits OEM GrillPro burners. OEM GrillPro burner part numbers usually start with letters SM and SP).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: SP5016-20
Weight: 0.05

Push button igniter. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-21
Weight: 0.05

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.

Part Number: S15111
Material: stainless steel
Weight: 0.02

Mini grease bucket used with wire holder S15111.

Part Number: S15112
Weight: .03

Wheel 6” plastic with 3/8” axle hole.

Part Number: 10892-608
Weight: 0.2

Genuine OEM GrillPro chrome steel warming rack.

Part Number: SP5022-3
Dimensions: 25 3/8”
Material: chrome steel
Weight: 2.5

HEAT SHIELD FIESTA 240/300 -- (2011)

Part Number: SM5069-9
Dimensions: 8 3/8” x 18 3/8”
Weight: 1.46

Hinge pin clip.

Part Number: S21233
Weight: 0.01

LEG EXTENSION OFF-SET

Part Number: 11494-148
Weight: 0.05

Wundersmoke Hickory Chips. These unique hickory wood smoking chips add distinctive hickory wood flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-6
Weight: 1.0

Extra long stainless steel fork with ergonomically correct handles. 20 1/2” long.

Part Number: ITF-2
Dimensions: 20 1/2
Material: stainless steel
Weight: 0.3

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.

Part Number: 14913
Material: stailess steel
Weight: 0.5

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4