GrillPro 218544 Grill Parts

Genuine OEM GrillPro stainless steel burner for GrillPro model 218544.

Part Number: C13500
Dimensions: 14 5/8” x 1 1/4”
Material: Stainless steel
Weight: 0.5

Cooking grid not known for GrillPro model 218544. Our parts information for this grill model is incomplete, and we really don't know with certainty which cooking grid fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the GrillPro cooking grids we carry. If we don't have the exact fit grid for your grill, we may have a suitable replacement part. Measure your existing part as well as the the grid support area of the grill so you'll know exactly what size grids will fit.

If you have this grill model and know the number and dimensions of your original cooking grids, please share this information with us. Click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: CG-DUMMY
Weight: 1.0

Stainless steel Flav-R-Wav/Flame Tamer for GrillPro model 218544. Made in USA.

Part Number: CLA-TS0111
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 6 1/8”
Material: stainless steel
Weight: 0.9

Genuine OEM GrillPro grease tray. Actual tray dimension without handle 8 1/8” x 29 3/4”. Uses grease cup C15500.

Part Number: 159-C550
Dimensions: 9 1/2” x 29 3/4”
Material: porcelain steel
Weight: 2.11

Genuine OEM GrillPro grease cup. Used in grease trays 159-C450, 159-C550 and other grease trays that use a 3 7/8” slide-in grease cup.

Part Number: C15500
Material: porcelain steel
Weight: 0.3

BEZEL - LID HANDLE GPB

Part Number: 239-C506
Weight: 0.1

Universal control knobs, set of two knobs, includes eight (8) shaft inserts to accomodate valve stem diameters of approximately 5/6” and 1/4”.

• Off position D-Value: 12 or 6 or 3 or 9 o'clock
• Knob diameter: 2 3/16”
• Insert socket diameters: 8.25mm (.32”) and 6.10mm (.24”)
• Knob shaft: Flat or 1”

Part Number: 25960
Weight: 0.20

Straight thru L.P regulator with 28” hose. Adequate to 90,000 BTU.

Part Number: HR-6B
Dimensions: 28
Weight: 1.50

CLIP - WHEEL AXLE GPB

Part Number: C11650
Weight: 0.02

ORIFICE SUPPORT RB 4B GPB

Part Number: 696-C500
Weight: 0.2

Genuine OEM GrillPro Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

Polished stainless steel turner with an ergonomic soft grip grey handle and red accents.

Part Number: 43108
Dimensions: 16
Material: stainless steel
Weight: 0.10

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Vertical.Chicken Leg and Wing Rack. Stainless steel.

A convenient stainless wire wing rack, the best way to roast chicken wings and legs on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.

Part Number: CLWR
Material: stainless steel
Weight: 1.0

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3