GrillPro 218584 Grill Parts

Commercial 304 grade stainless steel burner that is 1 1/4” in diameter for GrillPro model 218584. Has an electrode tab 2” from the front opening. Includes venturi spider screen.

Part Number: C13500
Dimensions: 14 5/8” x 1 1/4”
Material: Stainless steel
Weight: 0.5

Cooking grid not known for GrillPro model 218584. Our parts information for this grill model is incomplete, and we really don't know with certainty which cooking grid fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the GrillPro cooking grids we carry. If we don't have the exact fit grid for your grill, we may have a suitable replacement part. Measure your existing part as well as the the grid support area of the grill so you'll know exactly what size grids will fit.

If you have this grill model and know the number and dimensions of your original cooking grids, please share this information with us. Click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: CG-DUMMY
Weight: 1.0

Stainless steel Flav-R-Wav/Flame Tamer for GrillPro model 218584. Made in USA.

Part Number: CLA-TS0111
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 6 1/8”
Material: stainless steel
Weight: 0.9

Genuine OEM GrillPro grease tray. Actual tray dimension without handle 8 1/8” x 29 3/4”. Uses grease cup C15500.

Part Number: 159-C550
Dimensions: 9 1/2” x 29 3/4”
Material: porcelain steel
Weight: 2.11

Genuine OEM GrillPro grease cup. Used in grease trays 159-C450, 159-C550 and other grease trays that use a 3 7/8” slide-in grease cup.

Part Number: C15500
Material: porcelain steel
Weight: 0.3

BEZEL - LID HANDLE GPB

Part Number: 239-C506
Weight: 0.1

Universal control knobs, set of two knobs, includes eight (8) shaft inserts to accomodate valve stem diameters of approximately 5/6” and 1/4”.

• Off position D-Value: 12 or 6 or 3 or 9 o'clock
• Knob diameter: 2 3/16”
• Insert socket diameters: 8.25mm (.32”) and 6.10mm (.24”)
• Knob shaft: Flat or 1”

Part Number: 25960
Weight: 0.20

Straight thru L.P regulator with 28” hose. Adequate to 90,000 BTU.

Part Number: HR-6B
Weight: 1.50

CLIP - WHEEL AXLE GPB

Part Number: C11650
Weight: 0.02

ORIFICE SUPPORT RB 4B GPB

Part Number: 696-C500
Weight: 0.2

Heavy duty stainless steel 6 1/4” x 4” x 2 1/8” cased universal rotisserie motor. On-off switch and 3 foot cord. Maximum 25 lb. balanced load. (120V, 9W, 50/60 HZ, RPM: 2.5/2.8)

Part Number: RO-6
Material: Stainless steel case
Weight: 2.0

Genuine OEM GrillPro Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

BUSHING LID HINGE GPB

Part Number: C12520
Weight: 1.0

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Marinade Injector.

For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0