DCS DCS48-BQRS Grill Parts

Highest quality replacement parts for your DCS DCS48-BQRS - Free USA shipping $49 or more* - No Sales Tax*

DCS DCS48-BQRS owners manual and diagrams

Diagrams & owners manual not available for grill model# DCS48-BQRS. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for DCS model: DCS48-BQRS

All of the parts we have for DCS DCS48-BQRS are shown on this page. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for DCS grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct DCS DCS48-BQRS BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your DCS model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

DCS48-BQRS Burners

Click for photos

304 Stainless steel 15,000 BTU infrared rotissierie burner for DCS model DCS48-BQRS. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

Maximum overall length, including mounting tab on one end: 20 7/8”
Maximum width: 3 3/8”

Part Number: CLA-BS0250 (Replaces DCS DCS-210357)
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

Click for photos

213466 SMOKER BRNR ASSY for DCS model DCS48-BQRS.

Stainless steel replacement smoker burner. Fits DCS DCS36, DCS36A, DCS48, DCS48A Professional Series grills. Replaces original DCS part# 213466.

.

Part Number: DCS-213466-R1 (Replaces DCS DCS-213466)
Dimensions: 18” x 1”
Material: stainless steel
Weight: 0.7

Click for photos

210348-RBURNER H 36/48 MAT PORC for DCS model DCS48-BQRS.
Cast iron replacement ”H” burner. Fits older DCS 36” and 48” Professional Series grills.

Replaces original DCS burner part# 210348.

NOTE: Also fits grills manufactured by Dynamic Cooking Systems (DCS) for other brands.

Includes Air Shutter part# DCS-210330-R.

Part Number: DCS-210348-R2 (Replaces DCS DCS-210348)
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 15.2

Click for photos

210330-R Air shutter for DCS model DCS48-BQRS. Fits cast iron ”H” burners used on older DCS 27”, 36” and 48” Professional Series grills.

Replaces original DCS part# 210330.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Made in USA.

Part Number: DCS-210330-R (Replaces DCS DCS-210330)
Material: stainless steel
Weight: 0.05

==> All DCS Burners.

DCS48-BQRS Cooking Grids

Click for photos

212408-R GRILL RACK - 36/48 BBQ-BLK for DCS model DCS48-BQRS.

Heavy duty porcelain steel grill rack. Fits DCS36, DCS36A, DCS48, and DCS48A Professional Series gas grills.

Replaces DCS factory part# 212408.
Large diameter 5/16” porcelain steel rods.
Sold individually.

Part Number: DCS-212408-R (Replaces DCS DCS-212408)
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel
Weight: 10.11

Click for photos

212408-SS Heavy duty stainless steel grill rack for DCS model DCS48-BQRS. Fits DCS36, DCS36A, DCS48 and DCS48A Professional Series gas grills. Sometimes referred to as GRILL RACK - 36/48 BBQ-BLK.

Replaces DCS factory part# 212408.
Large diameter 5/16” stainless steel rods.
Commercial grade 304 stainless steel.
Sold individally.

Also see CG-79SS4 for a grid with notches at each corner.

Part Number: DCS-212408-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2

Click for photos

Premium stainless steel cooking grate for DCS model DCS48-BQRS. Replaces 20 1/2” DCS grates with notches at each corner.

Made in USA
Constructed of 304 ”commercial grade” stainless steel
5/16” solid stainless rods
Individual cooking grid measures 20-1/2” x 10-7/16”
Each grid features 4 notched corners
Sold individually

Part Number: CG-79SS4
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: stainless steel
Weight: 7.15

==> All DCS Cooking Grids.

DCS48-BQRS Rock/Briquette Grates

Click for photos

213949-R RADIANT W/A 36/48 BQ.
Stainless steel Lava Rock support. Fits DCS DCS36, DCS36A, DCS48, DCS48A Professional Series grills. These grills have the larger 20.5” cast iron H burners.

Replaces original DCS part# 213949.

Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA
Sold individually, number required varies

Part Number: DCS-213949-R (Replaces DCS DCS-213949)
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 9 9/16”
Material: stainless steel
Weight: 2.2

Click for photos

210005-R LAVA ROCK.
Natural lava rock processed and screened for uniformity. For use with Support Rack/Radient 213524 and 213949.

NOTE: This is NOT a DCS product. The original DCS part was 4 pounds of Lava Rock. This is a 7lb bag manufactured by GrillPro.

Part Number: DCS-210005-R
Material: pumice
Weight: 7.5

==> All DCS Rock/Briquette Grates.