DCS 27 Grill Parts

304 Stainless steel 15,000 BTU infrared rotisserie burner for DCS model 27. For use with LP and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for natural gas or LP gas

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0250 (Replaces DCS DCS-12021-02)
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

12022-R CI H Burner for DCS model 27.
Cast iron replacement ”H” burner. Fits older DCS 27” Professional Series grills by Dynamic Cooking Systems.

Replaces original DCS burner part# 12022. Later manuals by Fisher & Paykel show this as part# 201358.

NOTE: Also fits grills manufactured by Dynamic Cooking Systems (DCS) for other brands.

Includes Air Shutter part# DCS-12003-02-R.


Part Number: DCS-12022-R2 (Replaces DCS DCS-12022)
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 10.0

304 Stainless steel 15,000 BTU infrared rotissierie burner for DCS model 27. For use with both liquid propane (LP) and natural gas grills. Includes collector box. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for for natural gas or LP.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0358
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

19014-PC-SS Grill Rack for DCS model 27.
Heavy duty stainless steel grill rack. Fits DCS27 and DCS27A Professional Series gas grills by Dynamic Cooking Systems.

• Replaces DCS factory part# 19014-PC.
• Large diameter 5/16” stainless steel rods.
• Commercial grade 304 stainless steel.
• Sold individally.

Part Number: DCS-19014-PC-SS (Replaces DCS DCS-19014-PC)
Dimension Front-to-Back: 18 1/2”
Dimension Side-to-Side: 12 3/4”
Weight: 6.6

30709-020-R Lava Rock Support.
Stainless steel Lava Rock Support. This is a rack/tray for holding Lava Rock (not included). Requires one per burner. Fits DCS 27” DCS27 and DCS27A Professional Series grills. These grills have the smaller 16” cast iron H burners.

• Replaces original DCS part# 30709-020.
• See part# 10312-R for Lava Rock.
• Sometimes shipped with vinyl peel-off coating. Remove before use.
• Made in USA
• Sold individually.

Part Number: DCS-30709-020-R (Replaces DCS DCS-30709-020)
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 10 5/8”
Material: stainless steel
Weight: 2.2

10312-R LAVA ROCK.
Natural lava rock processed and screened for uniformity. Use with Support Rack 30709-020.

NOTE: This is NOT a DCS product. The original DCS part was 4 pounds of Lava Rock. This is a 7lb bag manufactured by GrillPro.

Part Number: DCS-10312-R
Material: pumice
Weight: 7.5

DCS Electrode with wire.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-37B (Replaces DCS DCS-13012-06)
Weight: 0.2

16190-R KIT, ROTARY IGNITER & KNOB BBQ. Single outlet rotary igniter for DCS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 16190
• Includes Igniter, knob, and mounting screws

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-16190-R (Replaces DCS DCS-16190)
Weight: 0.2

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces DCS DCS-13026)
Weight: 0.8

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces DCS DCS-13017)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.

Part Number: 14913
Material: stailess steel
Weight: 0.5

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

Stainless Steel Scraper for Phoenix and Holland Drip Trays

Part Number: SDDPS
Dimensions: 20
Weight: 0.30