DCS 48 Grill Parts

304 Stainless steel 15,000 BTU infrared rotisserie burner for DCS model 48. For use with LP and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for natural gas or LP gas

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0250 (Replaces DCS DCS-12021-2)
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

30639-R Stainless steel replacement smoker burner for DCS model 48.

Fits DCS 36A and 48A Professional Series grills by Dynamic Cooking Systems. Replaces original DCS part# 30639.

.

Part Number: DCS-30639-R2 (Replaces DCS DCS-30639)
Dimensions: 18
Material: stainless steel
Weight: 1.0

12012-02-R CI H Burner for DCS model 48.
Cast iron replacement ”H” burner. Fits older DCS 36” and 48” Professional Series grills by Dynamic Cooking Systems.

Replaces original DCS burner part# 12012-02. Later manuals by Fisher & Paykel show this as part# 201348.

NOTE: Also fits grills manufactured by Dynamic Cooking Systems (DCS) for other brands.

Includes Air Shutter part# DCS-12003-02-R.


Part Number: DCS-12012-02-R2 (Replaces DCS DCS-12012-02)
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 15.2

12003-02-R Air shutter for DCS model 48. Fits cast iron ”H” burners used on older DCS 27”, 36” and 48” Professional Series grills.

Replaces original DCS part# 12003-02.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.<.p> Made in USA.

Part Number: DCS-12003-02-R (Replaces DCS DCS-12003-02)
Material: stainless steel
Weight: 0.05

304 Stainless steel 15,000 BTU infrared rotissierie burner for DCS model 48. For use with both liquid propane (LP) and natural gas grills. Includes collector box. Orifice not included. Use old orifice or purchase our orifice part number CLA-VB0245 that can be drilled for for natural gas or LP.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Part Number: CLA-BS0358
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

19006-R Grill Rack for DCS model 48.
Heavy duty porcelain steel grill rack. Fits DCS36, DCS36A, DCS48, and DCS48A Professional Series gas grills. Sometimes referred to as GRILL RACK - 36/48 BBQ-BLK.

• Replaces DCS factory part# 19006.
• Large diameter 5/16” porcelain steel rods.
• Sold individually.

Part Number: DCS-19006-R (Replaces DCS DCS-19006)
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel
Weight: 10.11

19006-SS Heavy duty stainless steel grill rack for DCS model 48. Fits DCS36, DCS36A, DCS48 and DCS48A Professional Series gas grills by Dynamic Cooking Systems. Sometimes referred to as GRILL RACK - 36/48 BBQ-BLK.

• Replaces DCS factory part# 19006.
• Large diameter 5/16” stainless steel rods.
• Commercial grade 304 stainless steel.
• Sold individally.

Part Number: DCS-19006-SS
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 3/8”
Material: stainless steel
Weight: 10.2

30522-R Lava Rock Support.
Stainless steel Lava Rock support tray. Fits DCS DCS36, DCS36A, DCS48, DCS48A Professional Series grills by Dynamic Cooking systems. These grills have the larger 20.5” cast iron H burners.

Replaces original DCS part# 30522.

• Sometimes shipped with vinyl peel-off coating. Remove before use.
• Made in USA
• Sold individually, number required varies

Part Number: DCS-30522-R (Replaces DCS DCS-30522)
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 9 9/16”
Material: stainless steel
Weight: 2.2

10312-R LAVA ROCK.
Natural lava rock processed and screened for uniformity. Use with Support Rack 30709-020.

NOTE: This is NOT a DCS product. The original DCS part was 4 pounds of Lava Rock. This is a 7lb bag manufactured by GrillPro.

Part Number: DCS-10312-R
Material: pumice
Weight: 7.5

16190-R KIT, ROTARY IGNITER & KNOB BBQ. Single outlet rotary igniter for DCS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 16190
• Includes Igniter, knob, and mounting screws

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-16190-R (Replaces DCS DCS-16190)
Weight: 0.2

DCS Electrode with wire.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-37B (Replaces DCS DCS-13012-6)
Weight: 0.2

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces DCS DCS-13026-01)
Weight: 0.8

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Part Number: 30171 (Replaces DCS DCS-13017)
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

32038-R Smoker burner tray.
Stainless steel wood chip tray for smoking. Add wood chips for a smoked flavor. Also known as a smoker box or smoker tray.

Fits DCS 36A and48A Professional Series grills by Dymaniv Cooking Systems.

Replaces original DCS part# 32038.

.


Part Number: DCS-32038-R (Replaces DCS DCS-32038)
Material: stainless steel
Weight: 0.40

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

4 Piece Stainless Steel Tool Set With Accents Turner, tong, and fork constructed of high gade, polished stainless steel, with soft grip accents. Silicone tip tongs heat resistant to 500 degrees farenheit. High quality grill brush.

Part Number: 40070
Material: stainless steel
Weight: 2.12

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.

• Works with both charcoal and gas grills.
• Easy to use and refill.
• Long lasting cast iron.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

Non-Stick Wing Rack.

A convenient non-stick coated wire wing rack with folding legs, the best way to roast chicken legs and wings on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.

Part Number: 41551
Weight: 0.5

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.2