Broil-Mate 7301-24 Grill Parts

Stainless steel burner and venturi assembly for Fiesta 240 series grills for Broil-Mate model 7301-24. This part is also the factory replacement for burner SM164A12

Part Number: SM191A-12
Dimensions: 3 1/2” x 13 7/8”
Material: stainless steel
Weight: 1.22

Genuine OEM Broil-Mate Side Burner for Broil-Mate model 7301-24. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).

Part Number: 10390-E10
Weight: 0.4

Chrome plated cooking grid for Broil-Mate model 7301-24. Made in USA.

Part Number: CG-31
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 1/2”
Material: Chrome steel
Weight: 2.1

Genuine OEM Broil-Mate porcelain steel cooking grid for Broil-Mate model 7301-24.

• Porcelain enameled, glossy finish.
• Sold individually.
• Fits 240 series grills, others

Note: This is also a factory replacement for part SP124-3, which has been discontinued.

Part Number: SP124A-3
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 7/8”
Material: porcelain steel
Weight: 2.36

Genuine OEM Broil-Mate Smart Bar for Broil-Mate model 7301-24.

Note: This is also a factory replacement for part SP68-9, which has been discontinued.

Part Number: SM5072-9
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 1/8”
Material: aluminized steel
Weight: 2.6

Stainless steel Heat Plate; also known as a Flame Tamer and Smart Bar for Broil-Mate model 7301-24. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0324
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 7 3/16”
Material: stainless steel
Weight: 1.6

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

Genuine OEM Broil-Mate snap-on electrode, wire, and collector box assembly.

Note: This part does not fit our after-market burners such as 19002.

This part only fits OEM Broil-Mate burners. OEM Broil-Mate burner part numbers usually start with letters SM and SP).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: SP5016-20
Weight: 0.05

Genuine OEM Broil-Mate push button igniter. For two-wire grills with second wire for side burner. Wires not included.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-22
Weight: 0.2

Genuine OEM Broil-Mate 28” wire for side burner. One female spade connector, one female round connector..

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T16
Dimensions: 28
Weight: 0.05

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.

Part Number: S15111
Material: stainless steel
Weight: 0.02

Phenolic standoff spacer (1 1/2” x 1 1/8”) used between lid handle and the grill's lid

Part Number: SP5001-40
Weight: .03

Wheel 6” plastic with 3/8” axle hole.

Part Number: 10892-608
Weight: 0.2

Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included.

Part Number: 10240-13
Weight: .10

Genuine OEM Broil-Mate chrome warming rack.

Part Number: SP5021-3
Material: chrome steel
Weight: 1.15

HEAT SHIELD FIESTA 240/300 -- (2011)

Part Number: SM5069-9
Dimensions: 8 3/8” x 18 3/8”
Weight: 1.46

Cotter pin

Part Number: Y-11230
Weight: 0.01

Hinge pin clip.

Part Number: S21233
Weight: 0.01

SCREW-PHCP 6-32X1/4 TY-F JS500

Part Number: Y-12835
Weight: 1.0

LEG EXTENSION OFF-SET

Part Number: 11494-148
Weight: 0.05

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

Chrome plated rib/potatoe rack. Spaces up to 6 racks of ribs and 6 potatoes. Fits all grills. 12” x 7 1/4”.


Part Number: RR-2
Material: chrome steel
Weight: 1.0

Replacement brass bristle brush head for WB-8 brush. Screws included.

Part Number: WB-8RH
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.2