Broil-Mate 1854-4 Grill Parts

Highest quality replacement parts for your Broil-Mate 1854-4 - Free USA shipping $49 or more* - No Sales Tax*

Broil-Mate 1854-4 owners manual and diagrams

Diagrams & owners manual not available for grill model# 1854-4. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement BBQ grill parts for Broil-Mate model: 1854-4

All of the parts we have for Broil-Mate 1854-4 are shown on this page. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Broil-Mate grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Broil-Mate 1854-4 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Broil-Mate model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

1854-4 Burners

S10077

Click for photos

Genuine OEM Broil-Mate stainless steel burner and venturi assembly for Broil-Mate model 1854-4. Includes burner-mounted igniter electrode and wire part# S15500. Fully assembled.

Part Number: S10077
Dimensions: 8” x 16”
Material: Stainless steel
Weight: 2.5

==> All Broil-Mate Burners.

1854-4 Cooking Grids

CG-21SS

Click for photos

Premium grade solid stainless steel grid with 1/4” rods for Broil-Mate model 1854-4. Sold individually, two (2) required.

Part Number: CG-21SS
Dimension Front-to-Back: 15 1/4”
Dimension Side-to-Side: 11”
Material: stainless steel
Weight: 4.00

==> All Broil-Mate Cooking Grids.

1854-4 Heat Plates

10222-T325

Click for photos

Genuine OEM Broil-Mate stainless steel Flav-R-Wave SS heat plate for Broil-Mate model 1854-4.

Part Number: 10222-T325
Dimension Front-to-Back: 10 3/8”
Dimension Side-to-Side: 18”
Material: Stainless steel
Weight: 2.4

==> All Broil-Mate Heat Plates.

1854-4 Igniter Components

10342-247

Click for photos

Genuine OEM Broil-Mate electronic push-button 4-spade igniter.

Uses AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: 10342-247
Weight: 0.5

S15500

Click for photos

Genuine OEM Broil-Mate collector box and electrode assembly. Includes

burner mounted collector box (clip on)
ceramic electrode and 18” wire with round connector and protective sleeve.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: S15500
Weight: 0.1

==> All Broil-Mate Igniter Components.

1854-4 Grease Trays

S15111

Click for photos

Stainless steel wire grease cup holder for mini bucket #S15112 which has been discontinued and replaced with mini bucket # 4673-FC. This wire holder can also be used with tin cans for easy disposal of grease.

Part Number: S15111
Material: stainless steel
Weight: 0.02

==> All Broil-Mate Grease Trays.

1854-4 Knobs and Handles

10472-K40

Click for photos

Genuine OEM Broil-Mate rotary igniter knob.

Part Number: 10472-K40
Weight: 0.1

10472-K431

Click for photos

10472-K431 Control knob large. Black with stainless steel BA strip.

Genuine OEM control knob.

Off position D-Value: 6 o'clock
Knob diameter: 2 1/4”
Socket diameter: 5/16”
Knob stem: 1/2”

Part Number: 10472-K431
Weight: 0.1

10239-7

Click for photos

Triangular handle washer. 1/8 in thick. Made of heat resistant compressed material.

Part Number: 10239-7
Dimensions: 1 1/2” x 1 1/4”
Weight: 0.05

==> All Broil-Mate Knobs and Handles.

1854-4 Regulators and Hoses

HR-4B

Click for photos

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B
Weight: 0.8

ASCPL-1

Click for photos

Five piece 3/8” natural gas quick disconnect set includes:

Part ASCPL-2 12ft vinyl 3/8” ID Sturgis hose (3/8” inside diameter outside diameter about 1/2”) with solid brass fittings
Part ASCPL-3 Sturgis brand 3/8” quick connect brass coupler
Hansen & Sturgis dust cover
plastic dust plug
Plastic 3/8 MPT Snap Tite
Suitable up to approximately 60,000 BTU.

Part Number: ASCPL-1
Weight: 3.0

==> All Broil-Mate Regulators and Hoses.

1854-4 Wheels and Castors

10892-7G

Click for photos

Genuine OEM Broil-Mate 7” cart wheel with 3/8” axel hole. Mini hub cap is # 00400251, sold separately.

Part Number: 10892-7G
Weight: .45

==> All Broil-Mate Wheels and Castors.

1854-4 Heat indicators and Meat Thermometers

10571-6

Click for photos

Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

==> All Broil-Mate Heat indicators and Meat Thermometers.

1854-4 Miscellaneous Repair Parts

S21233

Click for photos

Hinge pin clip.

Part Number: S21233
Weight: 0.01

Y-6616

Click for photos

Bolt hex head 1 1/2” length

Part Number: Y-6616
Weight: 0.02

S21255

Click for photos

Washer

Part Number: S21255
Weight: 0.01

==> All Broil-Mate Miscellaneous Repair Parts.

1854-4 Shelves

10184-E461

Click for photos

SHELF SUPPORT LH BLK

Part Number: 10184-E461
Weight: 1.0

==> All Broil-Mate Shelves.

1854-4 Accessories

00240

Click for photos

Cherry wood chips.

All natural wood smoke flavor
Great for use in BBQ's or smokers.
170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00240
Weight: 1.14

40730

Click for photos

2 in 1 chrome plated turner / tong with PVC coated handle

Part Number: 40730
Dimensions: 14
Material: chrome steel
Weight: 0.6

00185

Click for photos

Part Number: 00185
Material: stainless
Weight: .3

00150

Click for photos

Cast iron smoker box with six oblong venting holes. Fill with water-soaked wood chips and add smoke flavor to you food. Designed to release wood smoke.

Works with both charcoal and gas grills.
Easy to use and refill.
Long lasting cast iron.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

CLWR

Click for photos

Vertical.Chicken Leg and Wing Rack. Stainless steel.

A convenient stainless wire wing rack, the best way to roast chicken wings and legs on the grill without the hassle of flipping, turning or sticking. For wings and drumsticks.

Part Number: CLWR
Material: stainless steel
Weight: 1.0

VTC-B

Click for photos

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3

==> All 1854-4 Accessories.

BBQ Part Categories

Broil-Mate gas grill 1854-4 - Tuesday, May 12 2026

Return to Broil-Mate grills main page

More Broil-Mate grill models we have parts for

7821-67 | 7821-84 | 7821-87 | 7822-54 | 7822-57 | 7822-64 | 7822-67 | 782254 | 782254B | 782257 | 782257B | 782264 | 782264B | 782267 | 782267B | 7825-64 | 7825-67 | 7825-84 | 7825-87 | 7831-64 | 7831-67 | 7831-84 | 7831-87 | 7835-14 | 7835-17 | 7835-24 | 7835-27 | 7835-44 | 7835-47 | 7835-64 | 7835-67 | 7835-84 | 7835-87 | 783584 | 783587 | 785154 | 785164 | 785194 | 785964 | 786164 | 786167 | 786184 | 786187 | 786189 | 8213-4 | 8213-7 | 8218-4 | 8218-7 | 8219-4 | 8219-7 | Complete list of Broil-Mate grill models...

*Orders for Broil-Mate grill model 1854-4 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026