Broil-Mate 7132-54 Grill Parts

Broil-Mate logo

 

 

Highest quality replacement parts for your Broil-Mate 7132-54 - Free USA shipping $49 or more* - No Sales Tax*

 

Broil-Mate 7132-54 owners manual and diagrams
Diagrams & owners manual not available for grill model# 7132-54. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement gas grill parts for Broil-Mate model: 7132-54
All of the parts we have for Broil-Mate 7132-54 are shown on this page. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Broil-Mate grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Broil-Mate 7132-54 BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Broil-Mate model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


7132-54 Burners

Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG) for Broil-Mate model 7132-54. For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.

Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8

$20.19
 
Qty
 

 





7132-54 Cooking Grids

COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill for Broil-Mate model 7132-54.)

Part Number: 52002-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 12 3/4”
Material: cast iron
Weight: 6.75

$43.16
 
Qty
 

Genuine OEM Broil-Mate cooking grid for Broil-Mate model 7132-54. Porcelain treated, matte finish. (Sold individually; number required varies, check your grill.)

Part Number: 52007-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 6 5/16”
Material: cast iron
Weight: 3.10

$33.22
 
Qty
 

 





7132-54 Heat Plates

Heat tent 'C' stainless steel; also known as a Flav-r-Wave or heat plate for Broil-Mate model 7132-54.

Part Number: 52249-404
Material: stainless steel
Weight: 1.0

$11.73
 
Qty
 

 





7132-54 Igniter Components

Genuine OEM Broil-Mate electronic push-button 3-spade igniter.
  • Uses AAA battery (not included)
  • .Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-246
Weight: 0.6

$18.49
 
Qty
 

Genuine OEM Broil-Mate electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-E13
Weight: 0.05

$3.81
 
Qty
 

 





7132-54 Grease Trays

Genuine OEM Broil-Mate Porcelain Grease Pan.

Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45

$15.12
 
Qty
 

 





7132-54 Knobs and Handles

CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP

Part Number: 10472-K431
Weight: 0.1

$5.15
 
Qty
 

 





7132-54 Regulators and Hoses

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs



Part Number: HR-4B
Dimensions: 22
Weight: 0.8

$34.71
 
Qty
 

 





7132-54 Wheels and Castors

Wheel 6” plastic with 3/8” axle hole.

Part Number: 10892-608
Weight: 0.2

$7.28
 
Qty
 

Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included.

Part Number: 10240-13
Weight: .10

$2.23
 
Qty
 

 





7132-54 Heat indicators and Meat Thermometers

Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

$17.77
 
Qty
 

 





7132-54 Miscellaneous Repair Parts

Hinge pin clip.

Part Number: S21233
Weight: 0.01

$1.08
 
Qty
 

 





7132-54 Hardware

LID BUMPER

Part Number: Y-11231
Weight: 0.01

$1.08
 
Qty
 

 





7132-54 Accessories

WB-8
Stainless steel straight handle grill brush with replaceable head. Brass bristles and scarper. See part# WB-8RH for replacement grill brush heads. 18 1/2” long.
This part is currently out of stock, but more are already on the way and expected to arrive SPRING 23

Part Number: WB-8
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.8

$18.95
 
Qty
 

 



BBQ Part Categories


























 
 

Broil-Mate model 7132-54 - Sunday, May 5 2024

Return to Broil-Mate grill parts main page



More Broil-Mate grill models we have parts for
642 | 7012-54 | 7012-57 | 7012-64 | 7012-67 | 702-8 | 7020-54 | 7020-57 | 7020-64 | 7020-67 | 7022-54 | 7022-57 | 7032-54 | 7032-57 | 7032-64 | 7032-67 | 712 | 712-8 | 7120-64 | 7120-67 | 7122-54 | 7122-57 | 7122-64 | 7122-67 | 7123-64 | 7123-64H | 7123-67 | 7123-67H | 7123-84 | 7123-87 | 7130-54 | 7130-57 | 7130-64 | 7130-67 | 7132-57 | 7132-64 | 7132-67 | 7133-64 | 7133-67 | 7133-84H | 7133-87H | 7139-84 | 7139-87 | 716-8 | 722 | 7242-54C | 7252-54C | 726454 | 726464 | Complete list of Broil-Mate grill models...



*Orders for Broil-Mate grill model 7132-54 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024