Broil-Mate 7032-64 Grill Parts

Highest quality replacement parts for your Broil-Mate 7032-64 - Free USA shipping $49 or more* - No Sales Tax*

Broil-Mate 7032-64 owners manual and diagrams

Diagrams & owners manual not available for grill model# 7032-64. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the Broil-Mate model: 7032-64

This page shows all of the parts we know fit model Broil-Mate 7032-64. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Broil-Mate grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Broil-Mate 7032-64 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Broil-Mate model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

7032-64 Burners

52924-144

Click for photos

Genuine OEM Broil-Mate stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG) for Broil-Mate model 7032-64. For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.

Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8

10390-E10

Click for photos

Genuine OEM Broil-Mate Side Burner for Broil-Mate model 7032-64. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).

Part Number: 10390-E10
Weight: 0.4

==> All Broil-Mate Burners.

7032-64 Cooking Grids

52001-981

Click for photos

Replacement for OEM part numbers 11241, 52002-181, 52005-281, 52007-181 cast iron cooking grids per the manufacturer for Broil-Mate model 7032-64. SOLD INDIVIDUALLY.
NOTE: The number of pieces required varies by grill size. Check your grill's cooking grids support area to determine the number of panels needed.

Part Number: 52001-981
Dimension Front-to-Back: 17 1/2”
Dimension Side-to-Side: 6 1/10”
Material: cast iron
Weight: 3.65

==> All Broil-Mate Cooking Grids.

7032-64 Heat Plates

Heat tent 'C' stainless steel; also known as a Flav-r-Wave or heat plate for Broil-Mate model 7032-64.

Part Number: 52249-404
Material: stainless steel
Weight: 1.0

==> All Broil-Mate Heat Plates.

7032-64 Igniter Components

52216-014

Click for photos

COLLECTOR BOX 550 UPPER 430SS

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 52216-014
Dimensions: 28
Weight: 0.2

10342-247

Click for photos

Genuine OEM Broil-Mate electronic push-button 4-spade igniter.

Uses AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-247
Weight: 0.5

10342-E13

Click for photos

Genuine OEM Broil-Mate electrode with 14” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-E13
Weight: 0.05

10342-T18

Click for photos

Genuine OEM Broil-Mate 32” wire for side burner and other applications. Both ends are female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T18
Dimensions: 32
Weight: 0.05

==> All Broil-Mate Igniter Components.

7032-64 Grease Trays

22009-901

Click for photos

Genuine OEM Broil-Mate Porcelain Grease Pan.
This part is currently out of stock, but more are already on the way and expected to arrive early Nov

Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45

==> All Broil-Mate Grease Trays.

7032-64 Knobs and Handles

10472-K431

Click for photos

CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP

Part Number: 10472-K431
Weight: 0.1

10472-K231

Click for photos

CONTROL KNOB SMALL W/BA STRIP.

Off position D-Value: 6 o'clock
Knob diameter: 1 7/8”
Socket diameter: 5/16”
Knob shaft: 1/2”

Part Number: 10472-K231
Weight: 0.1

==> All Broil-Mate Knobs and Handles.

7032-64 Regulators and Hoses

HR-4B

Click for photos

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B
Dimensions: 22
Weight: 0.8

==> All Broil-Mate Regulators and Hoses.

7032-64 Wheels and Castors

10892-608

Click for photos

Wheel 6” plastic with 3/8” axle hole.

Part Number: 10892-608
Weight: 0.2

==> All Broil-Mate Wheels and Castors.

7032-64 Heat indicators and Meat Thermometers

10571-6

Click for photos

Genuine OEM Broil-Mate Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

==> All Broil-Mate Heat indicators and Meat Thermometers.

7032-64 Miscellaneous Repair Parts

S21233

Click for photos

Hinge pin clip.

Part Number: S21233
Weight: 0.01

Y-11230

Click for photos

Cotter pin

Part Number: Y-11230
Weight: 0.01

==> All Broil-Mate Miscellaneous Repair Parts.

7032-64 Hardware

SCREW-PHCP 6-32X1/4 TY-F JS500

Part Number: Y-12835
Weight: 1.0

Y-11231

Click for photos

LID BUMPER

Part Number: Y-11231
Weight: 0.01

==> All Broil-Mate Hardware.

7032-64 Accessories

00215

Click for photos

GrillPro Wood chips from genuine oak whiskey barrels.

All natural wood smoke flavor
Great for use in BBQ's or smokers.
170 cubic inches (2 lbs. approx) in resealable bag

Try with beef, burgers, pork, lamb, poultry, and fish.

Part Number: 00215
Weight: 2.0

US10

Click for photos

5-piece unique tennis oriented utensil set. Constructed of heavy stainless steel with ”tennis grips” on each utensil. Includes yellow tennis ball style salt & pepper shakers, along with spatula, fork and tong.

Makes a nice gift.for tennis-minded folks

Part Number: US10
Weight: 5.00

40538

Click for photos

Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.

Part Number: 40538
Material: chrome steel
Weight: 1.1

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

RR-3

Click for photos

Roast holder. This holder is an ideal way to cook and also carry a roast from the grill. Made of heavy, bright nickel-plated steel, 15 1/4” L x 10 1/2” W.

Part Number: RR-3
Dimensions: 19 1/2
Weight: 1.0

90963

Click for photos

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.2

==> All 7032-64 Accessories.

BBQ Part Categories

Broil-Mate grill model 7032-64 - Tuesday, Oct 7 2025

Return to Broil-Mate grill parts main page

More Broil-Mate grill models we have parts for

765254 | 765257 | 765264 | 765267 | 765284 | 765287 | 765324 | 765327 | 765344 | 765347 | 765354 | 765357 | 765364 | 765367 | 765384 | 765387 | 766054 | 766057 | 766064 | 766154 | 766157 | 766164 | 766167 | 766264 | 766267 | 766284 | 766287 | 766324 | 766327 | 766344 | 766347 | 766364 | 766367 | 766384 | 766387 | 7761-54 | 7761-57 | 7761-64 | 7761-67 | 7761-84 | 7761-87 | 7765-84 | 7765-87 | 7811-54 | 7811-57 | 7811-64 | 7811-67 | 781254 | 781254B | 781257 | Complete list of Broil-Mate grill models...

*Orders for Broil-Mate grill model 7032-64 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: Oct 7 2025