Master Forge 3218LTM Grill Parts

Premium grade 304 stainless steel tube burner for Master Forge model 3218LTM. Sold individually, number required varies by grill.

Part Number: CLA-BS0256
Dimensions: 16 3/4” x 1”
Material: stainless steel
Weight: 0.45

Premium grade 304 stainless steel tube burner for Master Forge model 3218LTM.


Part Number: KENMFT1
Dimensions: 16 3/4” x 1”
Material: stainless steel
Weight: 1.0

Adjustable universal front-to-back tube burner with top-ported flame holes for Master Forge model 3218LTM. This burner may not work with existing ignition electrodes and back burner cross-overs.

• Variable length burner adjusts from 13 1/2” to 17 1/2”.
• Includes extra hardware and mounting brackets to accommodate almost all grills.
• Comes with complete installation instructions and diagrams.

WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for ”Ordered Wrong Part.” You will be responsible for all shipping fees.


Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7

Cast iron cooking grids for Master Forge model 3218LTM.

• SET OF THREE (3) panels
• Porcelain treated, matte finish
• Each panel measures 17 3/4” x 10 7/16”
• Total width: 31 1/4”

Part Number: CG-56P-CI-X3
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 31 1/4”
Material: cast iron
Weight: 27

Cast iron cooking grid for Master Forge model 3218LTM. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-56P-CI
Dimension Front-to-Back: 17 3/4”
Dimension Side-to-Side: 10 7/16”
Material: cast iron
Weight: 6.75

Stainless steel Heat Tent/ Flame Tamer for Master Forge model 3218LTM. Sold individually, number required varies.

Part Number: BMHP8
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 3 9/16”
Material: stainless steel
Weight: 0.5

SET OF FOUR/4 PACK Stainless steel Heat Distribution Plates for Master Forge model 3218LTM. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X4
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.16

SET OF FIVE/5 PACK Stainless steel Heat Distribution Plates for Master Forge model 3218LTM. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0147-X5
Dimension Front-to-Back: 15 5/16”
Dimension Side-to-Side: 3 5/8”
Material: stainless steel
Weight: 2.7

Electrode assembly. Includes:

• Ceramic electrode
• Gas collector box
• 40” connector wire with female spade connector
• Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03118
Material: ceramic
Weight: 0.2

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.

• 1.5 volt
• Has seven (7) spark outlets (male spade connector)
• Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
• Uses a single AA battery (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03387
Dimensions: 3 3/8” x 2”
Weight: 0.5

Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03621
Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1

Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

• Push-button ignition module switch with two male spade connectors on back
• Two 20” wires with female spade connectors
• One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

heat indicator

Part Number: 02351
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.2

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Replacement brass bristle brush head for WB-8 brush. Screws included.

Part Number: WB-8RH
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.2