Uniflame Wellington Grill Parts

Highest quality replacement parts for your Uniflame Wellington - Free USA shipping $49 or more* - No Sales Tax*

Uniflame Wellington owners manual and diagrams

Diagrams & owners manual not available for grill model# Wellington. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for the Uniflame model: Wellington

All of the parts we have for Uniflame Wellington are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Uniflame grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Uniflame Wellington BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Uniflame model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

Wellington Burners

UFT4

Click for photos

Stainless steel tube burner for Uniflame model Wellington.

Part Number: UFT4
Dimensions: 15 15/16” x 1”
Material: stainless steel
Weight: 0.4

==> All Uniflame Burners.

Wellington Cooking Grids

CG-80SS-X2

Click for photos

Premium quality stainless steel cooking grids for Uniflame model Wellington. SET OF TWO (2).

Made in USA
304 commercial grade stainless steel
5/16” diameter solid stainless rods

Each panel measures 19 1/2” x 12 3/4”
Overall dimensions: 19 1/2” x 25 1/2”

.

Part Number: CG-80SS-X2
Dimension Front-to-Back: 19 1/2”
Dimension Side-to-Side: 25 1/2”
Material: stainless steel
Weight: 14.6

==> All Uniflame Cooking Grids.

Wellington Heat Plates

90151

Click for photos

Porcelain steel heat shield for Uniflame model Wellington.

Part Number: 90151
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/16”
Material: porcelain steel
Weight: 0.8

UFGOHP2

Click for photos

Stainless steel Heat Plate for Uniflame model Wellington.

Part Number: UFGOHP2
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 3 1/16”
Material: stainless steel
Weight: 0.4

==> All Uniflame Heat Plates.

Wellington Igniter Components

TS-IG4010

Click for photos

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

IGEIB4-B

Click for photos

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-20B

Click for photos

Burner-mounted ceramic igniter electrode with mounting bracket and hardware.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-20B
Weight: 0.05

==> All Uniflame Igniter Components.

Wellington Accessories

00150

Click for photos

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

40269

Click for photos

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

This part is currently out of stock, but more are already on the way and expected to arrive mid August

Part Number: 40269
Material: stainless steel
Weight: 0.14

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

RR-2

Click for photos

Chrome plated rib/potatoe rack. Spaces up to 6 racks of ribs and 6 potatoes. Fits all grills. 12” x 7 1/4”.

Part Number: RR-2
Material: chrome steel
Weight: 1.0

==> All Wellington Accessories.

BBQ Part Categories

Uniflame grill model Wellington - Friday, Aug 1 2025

Return to Uniflame grills main page

More Uniflame grill models we have parts for

GBC1747WBS-U | GBC1747WPF-U | GBC1747WRS-U | GBC1756WS-U | GBC1762WSP-U | GBC1765WL-U | GBC1768WE-U | GBC1786WF-U | GBC1793W-U | GBC621C | GBC621CR-C | GBC720W | GBC720W-C | GBC730W | GBC730W-C | GBC750W | GBC750W-C | GBC750WNG-C | GBC772W | GBC772W-C | GBC790W | GBC790W-C | GBC820W | GBC820W-C | GBC820WC-C | GBC831WB | GBC831WB-C | GBC850W | GBC850W-C | GBC850WNG-C | GBC873W | GBC873WNG | GBC900W-C | GBC9129M | GBC920W1 | GBC940WIR | GBC956W1-C | GBC956W1NG-C | GBC976W | GBC981W | GBC981W-C | GBC981WBL | GBC981WBU | GBC983W-C | GBT10039L | GBT1012W | GBT1012W-C | GBT1022SP | GBT1030S | GBT1102W | Complete list of Uniflame grill models...

*Orders for Uniflame grill model Wellington $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Friday, August 1, 2025