Sams Valves, Orifices, and Manifolds

Flame thrower valve for LP gas.

• Integrated electrode & wire
• #56 LP Orifice included
• Includes clamp and screws
• Orifice part #31300 with starter hole fits this valve

Part Number: CLA-VL0253
Material: aluminum/brass
Weight: 0.50

CLA-VL0253 fits these 5 Sams models:
BQ05046-6-A BQ05046-6	BQ05051-3 BQ06042-1	BQ06043-1

Clamp-on brass valve with 45° gas outlet.

• D-Value is 6 o'clock
• Stem diameter: 8mm
• Orifice included
• Orifice pre-drilled to #59. For LP, this is approximately 11,654 BTU per burner.

Part Number: 3742C
Dimensions: 4 3/8” x 1 5/8”
Material: brass
Weight: 0.5

3742C fits these 7 Sams models:
608SB 9701D 9905TB	9912T GQ-5001D GQ-5002D	Y0101XC

Clamp-on brass gas valve with straight outlet. Includes orifice.

• D-Value: 12 o'clock
• Stem diameter: 6mm
• Stem length: 1 3/4”

Includes orifice with #72 starter hole. Must be drilled to proper drill size.

Part Number: 3700C
Dimensions: 4 15/16” x 2 1/8”
Material: brass
Weight: 0.5

3700C fits these 8 Sams models:
Y0660-1 Y0660 Y0660LP-2	Y0660LP Y0660NG-1 Y0660NG-2	Y0660NG Y0669NG

Brass long blunt-end hood orifice drilled to #64 starter hole. Fits valve 3042C, others. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31800
Dimensions: 1 5/16” x 0 9/16”
Material: brass
Weight: 0.1

31800 fits these 16 Sams models:
Y0005XC-1 Y0005XC-2 Y0101XC Y0202XC-LP Y0202XC-NG Y0202XC	Y0655 Y0656 Y0660-1 Y0660 Y0660LP-2 Y0660LP	Y0660NG-1 Y0660NG-2 Y0660NG Y0669NG

Brass orifice. 6mm x 3/4” cone shaped orifice with #64 drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31400
Dimensions: 0 3/4” x 0 5/16”
Material: brass
Weight: 0.01

31400 fits these 8 Sams models:
Y0660-1 Y0660 Y0660LP-2	Y0660LP Y0660NG-1 Y0660NG-2	Y0660NG Y0669NG

Clamp-on valve with mounting bracket and ignition switch. D-Value is 12 o'clock. Stem: 8mm x 1 1/4”. 30° snout. Known to fit some Nexgrill models.

Part Number: 30740
Dimensions: 4” x 2 1/8”
Material: brass
Weight: 0.6

30740 fits these 2 Sams models:
720-0709	720-0709B

Clamp-on brass valve with 45° gas outlet.

• D-Value is 12 o'clock
• Stem diameter: 6mm
• Orifice not included, use original or our part#31800

Part Number: 3042C
Weight: 0.5

3042C fits these 16 Sams models:
Y0005XC-1 Y0005XC-2 Y0101XC Y0202XC-LP Y0202XC-NG Y0202XC	Y0655 Y0656 Y0660-1 Y0660 Y0660LP-2 Y0660LP	Y0660NG-1 Y0660NG-2 Y0660NG Y0669NG

Neoprene valve gasket for clamp-on gas control valves. 19mm.

Part Number: 00019
Dimensions: 0 1/2” x 0 1/4”
Material: neoprene
Weight: 0.01

00019 fits these 24 Sams models:
608SB 720-0709 720-0709B 9701D 9905TB 9912T GQ-5001D	GQ-5002D Y0005XC-1 Y0005XC-2 Y0101XC Y0202XC-LP Y0202XC-NG Y0202XC	Y0655 Y0656 Y0660-1 Y0660 Y0660LP-2 Y0660LP 4 more models...