Sams BQ06042-1 Grill Parts

Highest quality replacement parts for your Sams BQ06042-1 - Free USA shipping $49 or more* - No Sales Tax*

Sams BQ06042-1 owners manual and diagrams

Diagrams & owners manual not available for grill model# BQ06042-1. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for Sams model: BQ06042-1

This page shows all of the parts we know fit model Sams BQ06042-1. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Sams grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Sams BQ06042-1 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Sams model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

BQ06042-1 Burners

CLA-BL0229

Click for photos

304 Stainless steel infrared rear rotisserie burner with ceramic wafer for Sams model BQ06042-1. For use with both liquid propane (LP) and natural gas grills. 8,000 BTU. Orifice not included. Use old orifice or purchase our orifice part# CLA-VB0245 that can be drilled for LP gas or natural gas.

Dimensions:

Maximum overall length, including mounting tab on one end: 17”
Maximum width: 3 3/8”
Burner box 15 3/8” x 3 3/8”
Mounting holes: 16 1/8” on center

Part Number: CLA-BL0229
Dimensions: 3 3/8” x 17”
Material: stainless steel and ceramic
Weight: 3.0

SCTB2

Click for photos

Stainless steel burner for Sams model BQ06042-1.

Part Number: SCTB2
Dimensions: 15 1/2” x 4 3/4”
Material: stainless steel
Weight: 1.0

==> All Sams Burners.

BQ06042-1 Burner Brackets and Carryovers

CLA-MS0109

Click for photos

Stainless steel burner support bracket. Made in USA

Part Number: CLA-MS0109
Dimensions: 31 3/4
Material: stainless steel
Weight: 3.0

==> All Sams Burner Brackets and Carryovers.

BQ06042-1 Cooking Grids

5S463

Click for photos

Stainless steel cooking grids (set of 3) for Sams model BQ06042-1.

Part Number: 5S463
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 30 3/4”
Material: stainless steel tubes
Weight: 9.0

CG-72P-CI-X3

Click for photos

Cast iron cooking grids for Sams model BQ06042-1. SET OF THREE (3) panels.

Porcelain treated, matte finish
Each panel measures 18 3/4” x 9 1/2”
Overall dimensions: 18 3/4 x 28 1/2”

Part Number: CG-72P-CI-X3
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 28 1/2”
Material: cast iron
Weight: 19.35

CG-70P-CI

Click for photos

Cast iron cooking grid for Sams model BQ06042-1. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-70P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 11 1/2”
Material: cast iron
Weight: 8.2

CG-72P-CI

Click for photos

Cast iron cooking grid for Sams model BQ06042-1. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-72P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45

==> All Sams Cooking Grids.

BQ06042-1 Heat Plates

CLA-TS0151-X3

Click for photos

SET OF THREE/3 PACK Stainless steel heat diffuser for Sams model BQ06042-1. On some grill models it is also known as a Flame Tamer. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0151-X3
Dimension Front-to-Back: 16 1/8”
Dimension Side-to-Side: 8 1/16”
Material: stainless steel
Weight: 4.05

==> All Sams Heat Plates.

BQ06042-1 Smoker Trays

CLA-MS0166KIT

Click for photos

Smoker drawer kit assembly. This aftermarket part replaces the drawer and includes the following:

Drawer with handle
Drawer cover
Mounting hardware and instructions
Made in USA

WARNING: Before you order this part, please verify it can be used in your gas grill; refer to the dimensions and measure the space allowed in your grill. This smoker drawer kit does not fit into all grills. We know it fits four brand names/six model numbers. Please refer to our Return Policy.

Part Number: CLA-MS0166KIT
Dimensions: 18 1/4” x 3 3/4”
Material: stainless steel
Weight: 2.1

==> All Sams Smoker Trays.

BQ06042-1 Grease Trays

CLA-DS0184

Click for photos

Stainless steel grease tray. The front-to-back dimension of 17 1/4” does not include the handle. With the handle included, the overall dimension is 18”. Made in USA

Part Number: CLA-DS0184
Dimensions: 17 1/4” x 26 5/8”
Material: stainless steel
Weight: 5.2

==> All Sams Grease Trays.

BQ06042-1 Valves, Orifices, and Manifolds

CLA-VB0245

Click for photos

Orifice for infrared burners with starter hole #63 if you need to drill the hole. Includes brass elbow with 1/4” compression fitting.

NOTE: If you need the orifice pre-drilled for Natural Gas or LP Gas, during check-out, in the message box, please state that you need the orifice drilled for Natural Gas #55 or for LP Gas #59.

Part Number: CLA-VB0245
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

==> All Sams Valves, Orifices, and Manifolds.

BQ06042-1 Accessories

00240

Click for photos

Cherry wood chips.

All natural wood smoke flavor
Great for use in BBQ's or smokers.
170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00240
Weight: 1.14

40730

Click for photos

2 in 1 chrome plated turner / tong with PVC coated handle

Part Number: 40730
Dimensions: 14
Material: chrome steel
Weight: 0.6

76745

Click for photos

GrillPro ® grid lifter removes both cast and stainless cooking grids.

One set of tines to remove cast and another to remove stainless cooking grids.

Stainless tip, resin handle.

Part Number: 76745
Material: stainless
Weight: .2

42055

Click for photos

Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.

Part Number: 42055
Dimensions: 13
Weight: 0.2

RR-2

Click for photos

Chrome plated rib/potatoe rack. Spaces up to 6 racks of ribs and 6 potatoes. Fits all grills. 12” x 7 1/4”.

Part Number: RR-2
Material: chrome steel
Weight: 1.0

VTC-B

Click for photos

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3

==> All BQ06042-1 Accessories.

BBQ Part Categories

Sams grill BQ06042-1 - Tuesday, May 12 2026

Return to Sams grill parts main page

More Sams grill models we have parts for

9701D | 9803S | 9905TB | 9912T | A-LA-CART-PLUS | B08SMG-1 | B09PG-4B | B09PG-4CP | B09SMG-1 | B09SMG-3 | B09SMG1-3F | B10PG20-2C | B10PG20-2R | BBQ08875CP | BG179A | BGE530BSP | BI-36PKG-NG | BQ05046-6 | BQ05046-6-A | BQ05046-6N | BQ05046-6N-A | BQ05051-3 | BQ06042-1-N | BQ06043-1 | BQ06043-1-N | DGA550SSP-D | DGB390SNP-D | DGB730SNB-D | DGE486SSP-D | DGE530BSP-D | GAS0440AS | GAS0565AS | GAS7540AS | GAS8560AS | GAS9670AS | GQ-5001D | GQ-5002D | GR2001402-MM-00 | GR2001408-MM-00 | GR2039201-MM-00 | GR2071001-MM-00 | GR2071008-MM-00 | GR2071013-MM-00 | GR2150901-MM-00 | GR2210601-MM-00 | GR2234801-MM-00 | GR2234802-MM-00 | GR2298901-MM-00 | GR3055-014571 | Complete list of Sams grill models...

*Orders for Sams grill model BQ06042-1 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026