Sams GR2234801-MM-00 Grill Parts

Sams logo

 

 

Highest quality replacement parts for your Sams GR2234801-MM-00 - Free USA shipping $49 or more* - No Sales Tax*

 

Sams GR2234801-MM-00 owners manual and diagrams
Diagrams & owners manual not available for grill model# GR2234801-MM-00. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement grill parts for the Sams model: GR2234801-MM-00
On this page you'll find all of the parts that fit model Sams GR2234801-MM-00. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a cooking grid and there are none here, click the cooking grids button to see all of the cooking grids we have for Sams grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Sams GR2234801-MM-00 BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Sams model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


GR2234801-MM-00 Burners

stainless steel burner for Sams model GR2234801-MM-00.

Part Number: 122L1
Dimensions: 17 3/8” x 5”
Material: stainless steel
Weight: 1.0

$58.31
 
Qty
 

stainless steel burner for Sams model GR2234801-MM-00.

Part Number: 122R1
Dimensions: 17 3/8” x 5”
Material: stainless steel
Weight: 1.0

$58.31
 
Qty
 

 





GR2234801-MM-00 Cooking Grids

Cast iron cooking grids for Sams model GR2234801-MM-00. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 61752
Dimension Front-to-Back: 19 1/16”
Dimension Side-to-Side: 18 5/8”
Material: gloss cast iron
Weight: 10.5

$75.24
 
Qty
 

 





GR2234801-MM-00 Heat Plates

Porcelain steel Flame Tamers for Sams model GR2234801-MM-00. SET OF TWO (2).

Part Number: 92291-X2
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 3.0

$84.82
 
Qty
 

Porcelain steel Flame Tamer for Sams model GR2234801-MM-00.

Part Number: 92291
Dimension Front-to-Back: 17 1/8”
Dimension Side-to-Side: 7 3/8”
Material: porcelain steel
Weight: 1.5

$45.97
 
Qty
 

 





GR2234801-MM-00 Igniter Components

Small AA battery powered push button spark generator.
  • 1.5 volt
  • Has two (2) terminals (male spade connector)
  • Uses a single AA battery (not included)
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03342
Weight: 0.3

$31.50
 
Qty
 

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10
 
Qty
 

Burner mounted electrodes with male spade connector. SET OF TWO (2). Includes small mounting bolts and nuts.

  • Wire not included. Commonly used with wire part# 03610.
  • Female spade connector on wire connects to male spade connector of electrode.
  • If used with existing wire, confirm connecting end of wire is a female spade connector
  • Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 02291-X2
Dimensions: 3 3/4” x 0 11/16”
Weight: 0.2

$17.36
 
Qty
 

Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.

  • Wire not included. Commonly used with wire part# 03610.
  • Female spade connector on wire connects to male spade connector of electrode.
  • If used with existing wire, confirm connecting end of wire is a female spade connector
  • Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2 and 3 piece multi-packs. See part 04022-X2, X3.



Part Number: 02291
Dimensions: 3 3/4” x 0 11/16”
Weight: 0.1

$8.93
 
Qty
 

 





GR2234801-MM-00 Heat indicators and Meat Thermometers

Round heat indicator.
  • Single probe
  • 3 1/8” diameter
  • Requires .60” mounting hole

WARNING: Please remove your old heat indicator and inspect how it is fitted onto the hood of your grill. This heat indicator has a .44” thread length; a wing nut is included. The overall length of the probe from the base of the back-side to the end of the probe measures 1 1/2".

Part Number: 00020
Dimensions: 3 1/8” x 3 1/8”
Weight: .20

$19.15
 
Qty
 

 





GR2234801-MM-00 Accessories

BP-6
Wundersmoke Hickory Chips. These unique hickory wood smoking chips add distinctive hickory wood flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-6
Weight: 1.0

$9.75
 
Qty
 

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

$15.90
 
Qty
 

Aluminum foil grilling trays. Package of three.
  • Heavy duty aluminum foil
  • Re-usable
  • Great for grilling delicate foods like fish and veggies


Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

$8.64
 
Qty
 

WB-7
Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2

$5.96
 
Qty
 

 



BBQ Part Categories


























 
 

Sams grill model GR2234801-MM-00 - Sunday, May 5 2024

Return to Sams grills main page



More Sams grill models we have parts for
Y0655 | Y0656 | Y0660 | Y0660-1 | Y0660LP | Y0660LP-2 | Y0660NG | Y0660NG-1 | Y0660NG-2 | Y0669NG | 1554 | 608SB | 720-0582 | 720-0582B | 720-0584 | 720-0584A | 720-0586 | 720-0586A | 720-0691A | 720-0709 | 720-0709B | 720-0778A | 720-0778C | 720-0783T | 720-0804 | 720-0830F | 720-0882D | 720-0892 | 730-0582 | 730-0584 | 730-0586 | 730-0691A | 9701D | 9803S | 9905TB | 9912T | A-LA-CART-PLUS | B08SMG-1 | B09PG-4B | B09PG-4CP | B09SMG-1 | B09SMG-3 | B09SMG1-3F | B10PG20-2C | B10PG20-2R | BBQ08875CP | BGE530BSP | BI-36PKG-NG | BQ05046-6 | BQ05046-6-A | Complete list of Sams grill models...



*Orders for Sams grill model GR2234801-MM-00 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024