Phoenix SWRG1998-P Grill Parts

Phoenix SWRG1998-P

Highest quality replacement parts for your Phoenix SWRG1998-P - Free USA shipping $49 or more* - No Sales Tax*

Phoenix SWRG1998-P owners manual and diagrams

Diagrams & owners manual not available for grill model# SWRG1998-P. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts to fit Phoenix model: SWRG1998-P

All of the parts we have for Phoenix SWRG1998-P are shown on this page. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Phoenix grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Phoenix SWRG1998-P BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Phoenix model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

SWRG1998-P Burners

11602-79062

Click for photos

Stainless steel burner and venturi assembly kit for Phoenix model SWRG1998-P. Comes with all necessary gaskets and screws.

Part Number: 11602-79062
Dimensions: 15” x 4”
Material: stainless steel
Weight: 1.7

11602

Click for photos

Stainless steel oval burner for Phoenix model SWRG1998-P. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.

Part Number: 11602
Dimensions: 15” x 4”
Material: stainless steel
Weight: 1.5

==> All Phoenix Burners.

SWRG1998-P Venturis

79062

Click for photos

L-shaped venturi pair. Includes all necessary gaskets and screws/nuts.

Part Number: 79062
Dimensions: 7” x 2 1/8”
Material: zinc plated steel
Weight: 0.8

SG-B

Click for photos

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

==> All Phoenix Venturis.

SWRG1998-P Cooking Grids

SDCG

Click for photos

Heavy duty stainless steel cooking grid for Phoenix model SWRG1998-P.

Part Number: SDCG
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 24 3/8”
Material: Stainless steel
Weight: 2.0

==> All Phoenix Cooking Grids.

SWRG1998-P Igniter Components

03750

Click for photos

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

03751

Click for photos

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

IG-46B

Click for photos

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

UP-4B

Click for photos

Universal push-button igniter. Round male connector. Includes locking nut. Color can varies gray or black by manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: UP-4B
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-5B

Click for photos

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

==> All Phoenix Igniter Components.

SWRG1998-P Grease Trays

SDSSDT-A

Click for photos

Phoenix OEM Cast Aluminum Drip Tray

Part Number: SDSSDT-A
Dimensions: 23” x 14 3/4”
Material: cast aluminum
Weight: 7.45

==> All Phoenix Grease Trays.

SWRG1998-P Knobs and Handles

09090

Click for photos

Black control knob.

Off position D-Value: 3 o'clock
Knob diameter: 1 3/4”
Socket diameter: 8mm
Knob shaft: None

Part Number: 09090
Dimensions: 1 3/4” x 1 3/4”
Material: plastic
Weight: 0.1

==> All Phoenix Knobs and Handles.

SWRG1998-P Heat indicators and Meat Thermometers

11381

Click for photos

Universal four piece mini thermometer set. Great gift idea.

2 calibrated for steak, and 2 for chicken
Mini thermometers for testing doneness of individual cuts of meat
Silicone bezels for easy removal when hot
Always use caution when handling hot objects

Part Number: 11381
Weight: .25

==> All Phoenix Heat indicators and Meat Thermometers.

SWRG1998-P Accessories

SSST

Click for photos

Stainless steel smoker box with cover. For use with all grills. Insert moistened wood chips (not included) for your favorite smoke flavor, 8 3/4” x 3 1/2” x 1 1/2”.

Part Number: SSST
Material: stainless steel
Weight: 1.5

US10

Click for photos

5-piece unique tennis oriented utensil set. Constructed of heavy stainless steel with ”tennis grips” on each utensil. Includes yellow tennis ball style salt & pepper shakers, along with spatula, fork and tong.

Makes a nice gift.for tennis-minded folks

Part Number: US10
Weight: 5.00

40538

Click for photos

Set of six 22” stainless steel V skewers with wood handles and silicone bezels. Silicone bezel helps the handle stay cool longer. V-shaped skewers keep food from spinning on shaft.

Part Number: 40538
Material: chrome steel
Weight: 1.1

41616

Click for photos

Rib & Roast Rack.

Reversible rib rack and roast support. Made of stainless steel with a frame that holds 6 racks of ribs and a roast support for large cuts of meat.

Part Number: 41616
Material: stainless steel
Weight: 0.5

24795

Click for photos

Stuffed Burger Press

The stuffed burger press is the best way to make gourmet stuffed and regular burger patties right at home. Easy to disassemble and clean.

Part Number: 24795
Weight: .3

==> All SWRG1998-P Accessories.

BBQ Part Categories

Phoenix SWRG1998-P -Tuesday, May 12 2026

Return to Phoenix grills main page

More Phoenix grill models we have parts for
PG2001-P \| PG2001-PBS \| SPG2001-P \| WRG1998-P \|

*Orders for Phoenix grill model SWRG1998-P $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026