Phoenix PG2001-PBS Grill Parts

Phoenix PG2001-PBS

Highest quality replacement parts for your Phoenix PG2001-PBS - Free USA shipping $49 or more* - No Sales Tax*

Phoenix PG2001-PBS owners manual and diagrams

Diagrams & owners manual not available for grill model# PG2001-PBS. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Phoenix model: PG2001-PBS

All of the parts we have for Phoenix PG2001-PBS are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Phoenix grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Phoenix PG2001-PBS BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Phoenix model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

PG2001-PBS Burners

OBS-PH34

Click for photos

Standard stainless steel oval burner and venturi assembly for Phoenix model PG2001-PBS. Includes:

Burner
Two venturi
All necessary gaskets and screws

Part Number: OBS-PH34
Dimensions: 4” x 15”
Material: stainless steel
Weight: 2.0

==> All Phoenix Burners.

PG2001-PBS Venturis

SG-B

Click for photos

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

==> All Phoenix Venturis.

PG2001-PBS Cooking Grids

SDCG

Click for photos

Heavy duty stainless steel cooking grid for Phoenix model PG2001-PBS.

Part Number: SDCG
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 24 3/8”
Material: Stainless steel
Weight: 2.0

==> All Phoenix Cooking Grids.

PG2001-PBS Igniter Components

UP-4B

Click for photos

Universal push-button igniter. Round male connector. Includes locking nut.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-4B
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-5B

Click for photos

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

03199C

Click for photos

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

03750

Click for photos

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

03751

Click for photos

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

==> All Phoenix Igniter Components.

PG2001-PBS Grease Trays

SDSSDT-A

Click for photos

Phoenix OEM Cast Aluminum Drip Tray

Part Number: SDSSDT-A
Dimensions: 23” x 14 3/4”
Material: cast aluminum
Weight: 7.45

==> All Phoenix Grease Trays.

PG2001-PBS Knobs and Handles

09090

Click for photos

Black control knob.

Off position D-Value: 3 o'clock
Knob diameter: 1 3/4”
Socket diameter: 8mm
Knob shaft: None

Part Number: 09090
Dimensions: 1 3/4” x 1 3/4”
Material: plastic
Weight: 0.1

==> All Phoenix Knobs and Handles.

PG2001-PBS Accessories

BRGG

Click for photos

Universal Grid Lifting Tool

Part Number: BRGG
Weight: 1.0

VTC-B

Click for photos

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3

==> All PG2001-PBS Accessories.

BBQ Part Categories

Phoenix model PG2001-PBS - Sunday, May 5 2024

Return to Phoenix grills main page

More Phoenix grill models we have parts for
PG2001-P \| SPG2001-P \| SWRG1998-P \| WRG1998-P \|

*Orders for Phoenix grill model PG2001-PBS $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024