Phoenix PG2001-P Grill Parts

Phoenix PG2001-P

Highest quality replacement parts for your Phoenix PG2001-P - Free USA shipping $49 or more* - No Sales Tax*

Phoenix PG2001-P owners manual and diagrams

Diagrams & owners manual not available for grill model# PG2001-P. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Phoenix model: PG2001-P

All of the parts we have for Phoenix PG2001-P are shown on this page. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a Flame Tamer/Heat Plate and there are none here, click the Heat Plate button to see all of the Heat Plates we have for Phoenix grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Phoenix PG2001-P BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Phoenix model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

PG2001-P Burners

OBS-PH34

Click for photos

Standard stainless steel oval burner and venturi assembly for Phoenix model PG2001-P. Includes:

Burner
Two venturi
All necessary gaskets and screws

Part Number: OBS-PH34
Dimensions: 4” x 15”
Material: stainless steel
Weight: 2.05

==> All Phoenix Burners.

PG2001-P Venturis

SG-B

Click for photos

Universal Spider Guards. Helps prevent dangerous flashback fires caused by spider webs in venturi tubes.Stainless steel spider guards slip over the air shutter on most venturi tubes to help keep the spiders out. For 3/4” venturi tubes.

Part Number: SG-B
Material: stainless steel
Weight: 0.1

==> All Phoenix Venturis.

PG2001-P Cooking Grids

SDCG

Click for photos

Heavy duty stainless steel cooking grid for Phoenix model PG2001-P.

Part Number: SDCG
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 24 3/8”
Material: Stainless steel
Weight: 2.0

==> All Phoenix Cooking Grids.

PG2001-P Igniter Components

03750

Click for photos

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

03751

Click for photos

Universal adapter wire with male round and female spade connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

IG-46B

Click for photos

Universal 2 1/2” adaptor wire with a round female end and a male spade end.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-46B
Dimensions: 2 1/2
Weight: 0.10

UP-4B

Click for photos

Universal push-button igniter. Round male connector. Includes locking nut. Color can varies gray or black by manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

This part is currently out of stock, but more are already on the way and expected to arrive late May

Part Number: UP-4B
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

IG-5B

Click for photos

Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-5B
Weight: 0.3

==> All Phoenix Igniter Components.

PG2001-P Grease Trays

SDSSDT-A

Click for photos

Phoenix OEM Cast Aluminum Drip Tray

Part Number: SDSSDT-A
Dimensions: 23” x 14 3/4”
Material: cast aluminum
Weight: 7.45

==> All Phoenix Grease Trays.

PG2001-P Knobs and Handles

09090

Click for photos

Black control knob.

Off position D-Value: 3 o'clock
Knob diameter: 1 3/4”
Socket diameter: 8mm
Knob shaft: None

Part Number: 09090
Dimensions: 1 3/4” x 1 3/4”
Material: plastic
Weight: 0.1

==> All Phoenix Knobs and Handles.

PG2001-P Accessories

BP-5

Click for photos

Wundersmoke Mesquite Chips. These unique mesquite wood smoking chips add distinctive flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-5
Weight: 1.0

FS-1

Click for photos

Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

11040

Click for photos

7” Bamboo BBQ Kabobs. Appetizer Server/Grilling Skewers - pack of 50. Limited to supplies on hand.

Ideal for searving or grilling appetizers
Wide end for easy handling

Part Number: 11040
Dimensions: 7
Weight: 0.4

BB-5

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

RR-3

Click for photos

Roast holder. This holder is an ideal way to cook and also carry a roast from the grill. Made of heavy, bright nickel-plated steel, 15 1/4” L x 10 1/2” W.

Part Number: RR-3
Dimensions: 19 1/2
Weight: 1.0

WB-1

Click for photos

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4

==> All PG2001-P Accessories.

BBQ Part Categories

Phoenix model PG2001-P - Tuesday, May 12 2026

Return to Phoenix grill parts main page

More Phoenix grill models we have parts for
PG2001-PBS \| SPG2001-P \| SWRG1998-P \| WRG1998-P \|

*Orders for Phoenix grill model PG2001-P $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | About Us Contact Us | Privacy Policy | Return Policy | Shipping Policy |
Build Date: May 12 2026