Grill Zone 810-6440-T Grill Parts

Grill Zone 6440 4-Burner LP gas grill with side burner

Highest quality replacement parts for your Grill Zone 810-6440-T - Free USA shipping $49 or more* - No Sales Tax*

Grill Zone 810-6440-T owners manual and diagrams

Click the small images on the right to view Grill Zone 810-6440-T exploded parts diagrams and parts lists. Owners manual not available. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Grill Zone 810-6440-T-31899366999839-PartsExpS1.gif

Grill Zone 810-6440-T-31899366999839-PartsLstS1.gif

Replacement gas grill parts for Grill Zone model: 810-6440-T

All of the parts we have for Grill Zone 810-6440-T are shown on this page. If you can't find the part you need below, click on the appropriate category button on the right side of the page. For example, if your looking for a heat indicator and there are none here, click the heat indicator button to see all we have for Grill Zone grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Grill Zone 810-6440-T BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Grill Zone model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

810-6440-T Burners

Click for photos

154-2500-0-R-X4 Cast iron burners for Grill Zone model 810-6440-T. Set of four (4). FIts some Brinkman and Grill Zone 4-Burner gas grills. May fit other grill models. This aftermarket burner replaces original burner part# 154-2500-0.

This a 4-pack of burners.

Part Number: 154-2500-0-R-X4 (Replaces Grill Zone 154-2500-0-X4)
Dimensions: 12 7/8” x 2 1/8”
Material: cast iron
Weight: 8.8

Click for photos

154-2500-0-R Cast iron burner for some Brinkmann and Grill Zone 3, 4, and 6 burner grills for Grill Zone model 810-6440-T. Sold individually.

This aftermarket part replaces original Brinkmann part# 154-2500-0.

Part Number: 154-2500-0-R (Replaces Grill Zone 154-2500-0)
Dimensions: 12 7/8” x 2 1/8”
Material: cast iron
Weight: 2.2

==> All Grill Zone Burners.

810-6440-T Cooking Grids

Click for photos

Cast iron cooking grids for Grill Zone model 810-6440-T. SET OF TWO (2) panels.

Porcelain treated, matte finish
Each panel measures 16 15/16” x11 3/4”
Overall dimensions: 16 15/16” x23 1/2”

Part Number: CG-63P-CI-X2
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 14.30

Click for photos

Cast iron cooking grid for Grill Zone model 810-6440-T. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-63P-CI (Replaces Grill Zone 115-4425-B)
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 7.15

==> All Grill Zone Cooking Grids.

810-6440-T Heat Plates

Click for photos

Stainless steel Flame Tamer for Grill Zone model 810-6440-T. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0001
Dimension Front-to-Back: 13 1/2”
Dimension Side-to-Side: 4 1/2”
Material: stainless steel
Weight: 0.7

Click for photos

SET OF FOUR/4 PACK Stainless steel Flame Tamer for Grill Zone model 810-6440-T. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0001-X4
Dimension Front-to-Back: 13 1/2”
Dimension Side-to-Side: 4 1/2”
Material: stainless steel
Weight: 2.8

==> All Grill Zone Heat Plates.

810-6440-T Igniter Components

Click for photos

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

Click for photos

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

==> All Grill Zone Igniter Components.

810-6440-T Accessories

Click for photos

Fish Spatula. Stainless steel fish spatula with genuine rosewood handle. 18 1/2”. 10” spatula width.

Part Number: FS-1
Dimensions: 18 1/2
Material: stainless steel
Weight: 1.0

Click for photos

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8

18” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-3
Dimensions: 18
Weight: 0.59

==> All 810-6440-T Accessories.

BBQ Part Categories

Grill Zone model 810-6440-T - Thursday, Apr 4 2024

Return to Grill Zone grill parts main page

More Grill Zone grill models we have parts for
810-4415-T \| 810-4436-T \| 810-6305-T \| 810-6345-T \| 810-6355-T \| 810-6410-T \| 810-6650-T \| 810-6670-T \| PG-40202OOLA \| SRGG21201 \| SRGG31201 \| SRGG41008 \| SRGG41207 \| SRGG42004 \| SRGG51206 \|