Charmglow Valves, Orifices, and Manifolds
Fits CHARMGLOW AMK-JAK-TNK-1000-2000-4000, C.C. AND C.C.-1-8260. 3/8” MPT INLET/PLUG ORIFICE #52 ORIFICE
Part Number: VLV-9 Material: Brass
Weight: 0.30
| VLV-9 fits these 14 Charmglow models: |
| | |
Single valve for LP gas. Fits HEJ, others. #49.
Part Number: VLV-2 Material: Brass
Weight: 0.30
| VLV-2 fits these 5 Charmglow models: |
| | |
Single valve for natural gas. Fits HEJ, others. #30.
Part Number: VLV-1B
Material: Brass
Weight: 0.30
Charmglow brass ”T” manifold.
Part Number: VLV-18 Material: Brass
Weight: 0.30
| VLV-18 fits these 6 Charmglow models: |
| | |
Brass LP valve assembly for Charmglow CC, CC-1, 4000, and 8260 grill models. Includes left and right LP valves and center manifold.
Part Number: VLV-14
Weight: 0.84
Single valve for natural gas. Fits HEJ, others. #30.
Part Number: VLV-1 Material: Brass
Weight: 0.30
| VLV-1 fits these 5 Charmglow models: |
| | |
#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.
Part Number: CLA-VB0246 Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3
| CLA-VB0246 fits this one Charmglow model: |
| | |
#63 orifice for infrared burner CLA-BL0229; use on liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.
Part Number: CLA-VB0245 Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3
| CLA-VB0245 fits this one Charmglow model: |
| | |
45° angled valve with extra long orifice snout. Accepts 11/32” x 32 threaded spud orifice (not included, see part# 33200). Mounts to left side of T manifold 38400. (39000 mounts to right side). Assembly MCM 32354 replaces Sunbeam OEM #40-2354.
Part Number: 38900 Material: brass
Weight: 0.3
| 38900 fits these 139 Charmglow models: |
| | |
Valve with 45° angled orifice snout built to accept 11/32 x 32 threaded spud type orifice (not provided); uses orifice # 33200. Mounts to the right side of original up-front control manifold assembly. Valve stem is 8mm, and needs a knob with a 9 D-value. Can use with universal knobs 00110 or 00310 or 01800 depending on needed knob stem length.
Part Number: 38600
Dimensions: 3 9/16” x 1 1/4”
Material: brass
Weight: 0.4
Right valve of assembly 37000. Replaces right side of Sunbeam OEM part #3512-0100. Orifice not included. Use original or 11/32” x 32 replacement. Also fits pre-1995 Fiesta models. D-Value is 6 o'clock
Part Number: 37400 Material: brass
Weight: 0.3
| 37400 fits these 139 Charmglow models: |
| | |
Charmglow natural gas 1/4” aluminum plumbing tubes with female compression fittings and #46 orifice for use with valve 36900. Set of two. Sold straight; bend to fit.
Part Number: 3692N Dimensions: 6
Material: aluminum
Weight: 0.2
| 3692N fits this one Charmglow model: |
| | |
Charmglow LP gas 1/4” aluminum plumbing tubes with female compression fittings and #54 orifice for use with valve 36900. Set of two. Sold straight; bend to fit.
Part Number: 3692L Dimensions: 6
Material: aluminum
Weight: 0.1
| 3692L fits this one Charmglow model: |
| | |
Natural gas plumbing tube for Charmglow 9250 with male compression fitting and #46 orifice for use with valve 36000. One pair. Provided straight; bend to fit.
Part Number: 3602N Dimensions: 13
Material: aluminum
Weight: 0.2
| 3602N fits these 129 Charmglow models: |
| | |
Charmglow natural gas plumbing tube with male compression fitting.
- Set of two
- Includes orifices (natural) and brass compression fittings
- For use with valve 36000
- Provided straight, bend to fit
Part Number: 3601N Dimensions: 5 1/2
Material: aluminum
Weight: 0.1
| 3601N fits these 129 Charmglow models: |
| | |
Charmglow LP gas plumbing tube with male compression fitting.
- Set of two
- Includes orifices (LP) and brass compression fittings
- For use with valve 36000
- Provided straight, bend to fit
Part Number: 3601L Dimensions: 5 1/2
Material: aluminum
Weight: 0.1
| 3601L fits these 129 Charmglow models: |
| | |
Brass spud orifice with 11/32” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 33200 Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01
| 33200 fits these 158 Charmglow models: |
| | |
Brass blunt-end hood orifice drilled to #64 starter hole. Fits valve 3701C, others. Must be drilled to proper drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31700 Dimensions: 0 15/16” x 0 9/16”
Material: brass
Weight: 0.1
| 31700 fits these 2 Charmglow models: |
| | |
Brass spud orifice with 5/16” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31600
Dimensions: 0 3/8” x 0 7/16”
Material: brass
Weight: 0.01
Brass orifice. 6mm x 3/4” cone shaped orifice with #64 drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 31400
Dimensions: 0 3/4” x 0 5/16”
Material: brass
Weight: 0.01
1/8” FPT to replace hood orifice x 1/8” female compression fitting. Use with MCM valve 36800 for models that use a valve stud mount and female compression fitting with MCM 3692L or 3692N 1/4” aluminum tubing.
Part Number: 30068 Material: brass
Weight: 0.1
| 30068 fits these 19 Charmglow models: |
| | |
Neoprene valve gasket for clamp-on gas control valves. 19mm.
Part Number: 00019
Dimensions: 0 1/2” x 0 1/4”
Material: neoprene
Weight: 0.01
