Charmglow Dummy2 Grill Parts

Cooking grid not known for Charmglow model Dummy2. Our parts information for this grill model is incomplete, and we really don't know with certainty which cooking grid fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the Charmglow cooking grids we carry. If we don't have the exact fit grid for your grill, we may have a suitable replacement part. Measure your existing part as well as the the grid support area of the grill so you'll know exactly what size grids will fit.

If you have this grill model and know the number and dimensions of your original cooking grids, please share this information with us. Click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: CG-DUMMY
Weight: 1.0

Heat Plate/ Flame Tamer not known for Charmglow model Dummy2. Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

1/8” FPT to replace hood orifice x 1/8” female compression fitting. Use with MCM valve 36800 for models that use a valve stud mount and female compression fitting with MCM 3692L or 3692N 1/4” aluminum tubing.

Part Number: 30068
Material: brass
Weight: 0.1

Brass spud orifice with 11/32” x 32 thread size. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 33200
Dimensions: 0 7/16” x 0 7/16”
Material: brass
Weight: 0.01

Charmglow LP gas plumbing tube with male compression fitting.

• Set of two
• Includes orifices (LP) and brass compression fittings
• For use with valve 36000
• Provided straight, bend to fit

Part Number: 3601L
Dimensions: 5 1/2
Material: aluminum
Weight: 0.1

Charmglow natural gas plumbing tube with male compression fitting.

• Set of two
• Includes orifices (natural) and brass compression fittings
• For use with valve 36000
• Provided straight, bend to fit

Part Number: 3601N
Dimensions: 5 1/2
Material: aluminum
Weight: 0.1

Natural gas plumbing tube for Charmglow 9250 with male compression fitting and #46 orifice for use with valve 36000. One pair. Provided straight; bend to fit.

Part Number: 3602N
Dimensions: 13
Material: aluminum
Weight: 0.2

Charmglow LP gas 1/4” aluminum plumbing tubes with female compression fittings and #54 orifice for use with valve 36900. Set of two. Sold straight; bend to fit.

Part Number: 3692L
Dimensions: 6
Material: aluminum
Weight: 0.1

Charmglow natural gas 1/4” aluminum plumbing tubes with female compression fittings and #46 orifice for use with valve 36900. Set of two. Sold straight; bend to fit.

Part Number: 3692N
Dimensions: 6
Material: aluminum
Weight: 0.2

Charmglow brass ”T” manifold.

Part Number: VLV-18
Material: Brass
Weight: 0.30

Valve with 45° angled orifice snout built to accept 11/32 x 32 threaded spud type orifice (not provided); uses orifice # 33200. Mounts to the right side of original up-front control manifold assembly. Valve stem is 8mm, and needs a knob with a 9 D-value. Can use with universal knobs 00110 or 00310 or 01800 depending on needed knob stem length.

Part Number: 38600
Dimensions: 3 9/16” x 1 1/4”
Material: brass
Weight: 0.4

Universal four piece mini thermometer set. Great gift idea.

• 2 calibrated for steak, and 2 for chicken
• Mini thermometers for testing doneness of individual cuts of meat
• Silicone bezels for easy removal when hot
• Always use caution when handling hot objects

Part Number: 11381
Weight: .25

Wundersmoke Maple Chips. These unique maple wood smoking chips add distinctive maple wood flavoring to your food. For use will all grills. One 1lb bag. Comes with reusable puck.

Part Number: BP-7
Weight: 1.0

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Rib & Roast Rack.

Reversible rib rack and roast support. Made of stainless steel with a frame that holds 6 racks of ribs and a roast support for large cuts of meat.

Part Number: 41616
Material: stainless steel
Weight: 0.5

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3