Weber Genesis 5500 Grill Parts

Stainless steel front or rear burner for Weber Genesis I-IV for Weber model Genesis 5500. See part# WTB1 for complete burner kit.

Part Number: WTB-F
Dimensions: 29 1/8”
Material: stainless steel
Weight: 1.2

Complete stainless steel burner assembly kit for Weber Genesis I-IV for Weber model Genesis 5500.

Includes:

• Two (2) part# WTB-F 29 1/8” front and rear burners
• One (1) part# WTB-C 28 3/8” center burner
• One (1) WTB-CT 13 1/2” cross-over tube.

Part Number: WTB1
Material: stainless steel
Weight: 3.0

Stainless steel cross-over tube for Weber model Genesis 5500. See part# WTB1 for complete burner kit.

Part Number: WTB-CT
Dimensions: 13 1/2”
Material: stainless steel
Weight: 0.13

Stainless steel center burner for Weber Genesis I-IV for Weber model Genesis 5500. See part# WTB1 for complete burner kit.

Part Number: WTB-C
Dimensions: 29 1/8”
Material: stainless steel
Weight: 1.0

Cooking grid not known for Weber model Genesis 5500. Our parts information for this grill model is incomplete, and we really don't know with certainty which cooking grid fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the Weber cooking grids we carry. If we don't have the exact fit grid for your grill, we may have a suitable replacement part. Measure your existing part as well as the the grid support area of the grill so you'll know exactly what size grids will fit.

If you have this grill model and know the number and dimensions of your original cooking grids, please share this information with us. Click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: CG-DUMMY
Weight: 1.0

Heat Plate/ Flame Tamer not known for Weber model Genesis 5500. Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

Push-Button self-grounding piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. Secondary connector is a flat male spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part# 03620. For more information, see our article Ignition 101.

Part Number: 03120
Weight: 0.1

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04800
Material: ceramic
Weight: 0.2

Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-9B
Weight: 0.2

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Control knob with long shaft.

• Off position D-Value: 6 o'clock
• Knob diameter: 1 5/8”
• Socket diameter: 8mm
• Knob shaft: 1 1/4”

Part Number: 00120
Dimensions: 1 5/8” x 1 5/8”
Material: plastic
Weight: 0.1

Hardwood replacement handle for some Weber grills. Total length 24 7/8” x 1 9/16”. Has two 1” slotted mounting holes for ”wiggle room” with center to center about 23 1/8”. (Hardware not included.)

Part Number: WH-4B
Dimensions: 24 7/8
Material: wood
Weight: .60

All purpose nickel plated warming rack. Fits Weber Spirit 700, Genesis 1-5000. Silver B and C, Gold B and C, and Platinum models.

Part Number: AP-WEB
Dimensions: 4 5/8” x 24 7/8”
Material: chrome steel
Weight: 1.5

All purpose chrome/nickel plated cradle style warming rack. Total length is 24 5/16”. Length of actual rack is 23”.

Part Number: AP-WEBCR
Dimensions: 4” x 24 5/16”
Material: Chrome steel
Weight: 1.5

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.


Part Number: 40269
Material: stainless steel
Weight: 0.14

Basting brush with angled oak handle. 18” overall length.

Part Number: BB-5
Dimensions: 18
Weight: 0.8