Grill-Parts home
 

Weber E-210LP Grill Parts

Weber logo

 

 

Highest quality replacement parts for your Weber E-210LP - Free USA shipping $49 or more* - No Sales Tax*

 

Weber E-210LP owners manual and diagrams
Diagrams & owners manual not available for grill model# E-210LP. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement gas grill parts for Weber model: E-210LP
On this page you'll find all of the parts that fit model Weber E-210LP. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for a cooking grid and there are none here, click the cooking grids button to see all of the cooking grids we have for Weber grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Weber E-210LP BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Weber model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


E-210LP Burners

WTB3
Click for photos
Complete stainless steel burner assembly kit for Weber Silver A and Spirit 500 models for Weber model E-210LP.

Includes:
  • Two (2) part# WTB-SAF 27” front and rear burners
  • One (1) WTB-SACT 10 1/2” crossover tube


Part Number: WTB3
Dimensions: 27
Material: stainless steel
Weight: 2.05

$60.18
 
Qty
 

WTB-SACT
Click for photos
Stainless steel cross-over tube for Silver A and Spirit 500 grills for Weber model E-210LP. See part# WTB3 for complete burner kit.

Part Number: WTB-SACT
Dimensions: 10 9/16”
Material: stainless steel
Weight: 0.15

$13.92
 
Qty
 

WTB-SAF
Click for photos
Stainless steel front or rear burner for Weber Silver A and Spirit 500 models for Weber model E-210LP. See part# WTB3 for complete burner kit.

Part Number: WTB-SAF
Dimensions: 27”
Material: stainless steel
Weight: 1.0

$31.96
 
Qty
 

==> All Weber Burners.
 





E-210LP Cooking Grids

CG-53SS
Click for photos
Commercial 304 grade stainless steel cooking grid with 1/4” diameter rods for Weber model E-210LP. Sold individually. Made in USA.

Part Number: CG-53SS
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 21 1/2”
Material: Stainless steel
Weight: 5

$68.90
 
Qty
 

CLA-GS0006
Click for photos

Premium quality heavy duty stainless steel cooking grid for Weber model E-210LP. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, almost 6 pounds of solid stainless each.

  • 304 commercial grade stainless steel
  • Large diameter 5/16” solid stainless rods
  • Dimensions: 15” x 11 1/8”
  • Made in USA.
  • Sold individually.


Part Number: CLA-GS0006
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 11 1/8”
Material: stainless steel
Weight: 5.8

$52.90
 
Qty
 

==> All Weber Cooking Grids.
 





E-210LP Heat Plates

WFB-5S
Click for photos
Heavy gauge stainless steel Flavoriser Bars for Weber Silver A and Spirit 500 model grills using a 5 bar system for Weber model E-210LP. SET OF FIVE (5).

Part Number: WFB-5S
Dimension Front-to-Back: ”
Dimension Side-to-Side: 21 9/16”
Material: stainless steel
Weight: 6.0

$58.36
 
Qty
 

==> All Weber Heat Plates.
 





E-210LP Igniter Components

03120
Click for photos
Push-Button self-grounding piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. Secondary connector is a flat male spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part# 03620. For more information, see our article Ignition 101.

Part Number: 03120
Weight: 0.1

$9.77
 
Qty
 

IG-30B
Click for photos
46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10
 
Qty
 

IG-48B
Click for photos
16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-48B
Dimensions: 16
Weight: 0.05

$6.00
 
Qty
 

04800
Click for photos
electrode assembly for use with Weber models with spark generators that have an external grounding prong. Includes mounting tabs to facilitate installation.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 04800
Material: ceramic
Weight: 0.2

$11.77
 
Qty
 

UP-9B
Click for photos
Snap In Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: UP-9B
Weight: 0.2

$8.38
 
Qty
 

03199C
Click for photos
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03199C
Weight: 0.05

$4.37
 
Qty
 

==> All Weber Igniter Components.
 





E-210LP Knobs and Handles

00120
Click for photos
Control knob with long shaft.
  • Off position D-Value: 6 o'clock
  • Knob diameter: 1 5/8”
  • Socket diameter: 8mm
  • Knob shaft: 1 1/4”


Part Number: 00120
Dimensions: 1 5/8” x 1 5/8”
Material: plastic
Weight: 0.1

$6.06
 
Qty
 

==> All Weber Knobs and Handles.
 





E-210LP Accessories

BP-7
Wundersmoke Maple Chips. These unique maple wood smoking chips add distinctive maple wood flavoring to your food. For use will all grills. One 1lb bag. Comes with reusable puck.

Part Number: BP-7
Weight: 1.0

$9.75
 
Qty
 

41333
Click for photos
Stainless steel chicken roaster. Commonly called Beer Can roasters.
  • The best way to roast poultry on the grill
  • For use in barbecues and ovens
  • Dishwasher safe
  • Includes rack, rack support, and basting brush


Part Number: 41333
Material: stainless steel
Weight: 0.10

$19.85
 
Qty
 

WB-1
12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4

$10.90
 
Qty
 

==> All E-210LP Accessories.
 



BBQ Part Categories














 
 

Weber model E-210LP - Sunday, May 5 2024

Return to Weber grill parts main page



More Weber grill models we have parts for
6811411 | 6820801 | 6821001 | 6821301 | 6821411 | 6831001 | 6831301 | 6831411 | 6840001 | 691101 | 7120001 | 7121001 | 7170001 | 7171001 | 7220001 | 7270001 | 7320001 | 7371001 | 7471001 | 7710001 | 7720001 | 7730001 | 7740001 | 7740501 | 7760001 | 7770001 | 7790001 | 7790501 | 77924014239 | 77924014390 | 7810001 | 7820001 | 7830001 | 7840001 | 7840501 | 7860001 | 7870001 | 7890001 | 7890501 | 900 | 921001 | 921002 | 931002 | 941001 | 941002 | E-210 | E-210NG | E-310 | Complete list of Weber grill models...



*Orders for Weber grill model E-210LP $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024