Nexgrill 720-0896E Grill Parts

Nexgrill logo

 

 

Highest quality replacement parts for your Nexgrill 720-0896E - Free USA shipping $49 or more* - No Sales Tax*

 

Nexgrill 720-0896E owners manual and diagrams
Diagrams & owners manual not available for grill model# 720-0896E. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

 


Replacement gas grill parts for Nexgrill model: 720-0896E
This page shows all of the parts we know fit model Nexgrill 720-0896E. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Nexgrill grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Nexgrill 720-0896E BBQ parts
  • You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
  • Verify your Nexgrill model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.
 


720-0896E Burners

stainless steel burner for Nexgrill model 720-0896E.

Part Number: 14781
Dimensions: 15” x 0 5/8”
Material: stainless steel
Weight: 0.4

$28.91
 
Qty
 

 





720-0896E Cooking Grids

matte finish cast iron cooking grid for Nexgrill model 720-0896E.

Part Number: 66173
Dimension Front-to-Back: 17 1/16”
Dimension Side-to-Side: 33 3/16”
Material: matte cast iron
Weight: 15.3

$123.82
 
Qty
 

 





720-0896E Heat Plates

Grillmaster Heat Plate for Nexgrill model 720-0896E.

Part Number: GMNGHP1
Dimension Front-to-Back: 14 1/4”
Dimension Side-to-Side: 3 3/8”
Material: stainless steel
Weight: 0.81

$17.61
 
Qty
 

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer for Nexgrill model 720-0896E. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a ”height” that is 3/16” taller than 97371. Determine if this matters to you and order the part that best replaces your old heat plate.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16

$48.77
 
Qty
 

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for Nexgrill model 720-0896E. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a ”height” that is 3/16” taller than 97371. Determine if this matters to you and order the part that best replaces your old heat plate.

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88

$62.52
 
Qty
 

Porcelain steel Flame Tamers for Nexgrill model 720-0896E. SET OF SIX.

Part Number: 97371-6X
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 3.3

$105.36
 
Qty
 

 





720-0896E Igniter Components

electrode with female spade connection and 45 ins. wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 01473
Dimensions: 3 3/4” x 1”
Weight: 0.1

$12.00
 
Qty
 

03377
Battery powered 7-outlets push button ignitor. Uses AA battery and requires a 7/8” mounting hole.

    WARNING: Before ordering this 7-outlet ignitor, please inspect the spacing inside your grill for this part. The original ignitor was 2 1/2” x 2 5/8”. The new version is longer 3 1/8” x 2” and it has two ”humps” on each end. The original only had one ”hump.” Please determine that the larger version will fit into your grill.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03377
Weight: 0.5

$38.00
 
Qty
 

 





720-0896E Heat indicators and Meat Thermometers

Heat indicator with a single probe and requires a 5/16” mounting hole. Note, the back side DOES NOT have an alignment pin.

Part Number: 00021
Dimensions: 3 5/8” x 1 3/4”
Weight: 0.2

$15.90
 
Qty
 

 





720-0896E Accessories

Stainless steel flipper. The ultimate spatula tool, specially curved for perfect flips every time. 18” overall.

Part Number: SF-1
Dimensions: 18
Material: stainless steel
Weight: 0.4

$15.90
 
Qty
 

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

$7.60
 
Qty
 

WB-7
Scrub brushes. Plastic grill scrubber. Cleans all types of cooking grids. Plastic grip handle.

Part Number: WB-7
Dimensions: 6” x 3 1/2”
Weight: 0.2

$5.96
 
Qty
 

 



BBQ Part Categories





















 
 

Nexgrill model 720-0896E - Monday, May 20 2024

Return to Nexgrill grills main page



More Nexgrill grill models we have parts for
720-0335 | 720-0336 | 720-0336B | 720-0336C | 720-0336D | 720-0337 | 720-0339 | 720-0340 | 720-0341 | 720-0396 | 720-0419 | 720-0430 | 720-0432 | 720-0433 | 720-0439 | 720-0440-LP | 720-0441-LP | 720-0459 | 720-0486 | 720-0490 | 720-0511 | 720-0512 | 720-0522 | 720-0522CAN | 720-0536 | 720-0539 | 720-0548 | 720-0549 | 720-0578 | 720-0582 | 720-0582B | 720-0584 | 720-0584A | 720-0586 | 720-0586A | 720-0600 | 720-0607 | 720-0617 | 720-0649 | 720-0650 | 720-0650A | 720-0665 | 720-0670 | 720-0670A | 720-0670B | 720-0670C | 720-0670E | 720-0671 | 720-0677 | 720-0678 | Complete list of Nexgrill grill models...



*Orders for Nexgrill grill model 720-0896E $49 and over ship free to the lower 48 states.
See shipping policy below for more info.


Home | About Us | Contact Us | Return Policy | Shipping Policy | Privacy Policy
Page Date: Monday, May 20 2024