Cascade TS29LP Grill Parts

Cascade 4-Burner LP gas grill, available at Kroger

Highest quality replacement parts for your Cascade TS29LP - Free USA shipping $49 or more* - No Sales Tax*

Cascade TS29LP owners manual and diagrams

Click the small images on the right to view Cascade TS29LP exploded parts diagrams and parts lists. Owners manual not available. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Cascade model: TS29LP

This page shows all of the parts we know fit model Cascade TS29LP. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Cascade grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Cascade TS29LP BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Cascade model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

TS29LP Burners

Click for photos

Stainless steel burner for Cascade model TS29LP. Sold individually, number required varies.

Part Number: AMT1 (Replaces Cascade FCMD3008002)
Dimensions: 17 1/8” x 1”
Material: stainless steel
Weight: 0.6

==> All Cascade Burners.

TS29LP Cooking Grids

Cast iron cooking grids for Cascade model TS29LP. Porcelain enameled, glossy finish. Sold as a set of two (2).

Part Number: 60902 (Replaces Cascade FCTG3007006)
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 27 1/2”
Material: gloss cast iron
Weight: 14.3

==> All Cascade Cooking Grids.

TS29LP Heat Plates

Click for photos

Stainless Flavor Grid (heat plate/Flame Tamer) for Cascade model TS29LP. Sold individually, number required varies.

Part Number: AMHP1 (Replaces Cascade FCTG3007005)
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 7/16”
Material: stainless steel
Weight: 1.0

Click for photos

SET OF THREE/3 PACK Flavor Grid, stainless steel for Cascade model TS29LP. Made in USA.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152-X3
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 3.6

Click for photos

SET OF FOUR/4 PACK Flavor Grid, stainless steel for Cascade model TS29LP. Made in USA.

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0152-X4
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 3 1/2”
Material: stainless steel
Weight: 4.8

==> All Cascade Heat Plates.

TS29LP Igniter Components

Click for photos

Ceramic electrode and 40” wire with female spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 06730
Material: ceramic
Weight: 0.1

==> All Cascade Igniter Components.

TS29LP Warming Racks

Click for photos

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

Far superior to the original porcelain coated steel rack
Rests on your existing cooking grids.
Solid 1/4” 304 stainless steel rods.
Stands 3.75 inches tall.
Made in USA.

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.

Part Number: CLA-WS0040
Dimensions: 6 1/4” x 22 7/8”
Material: stainless steel
Weight: 4.8

==> All Cascade Warming Racks.

TS29LP Heat indicators and Meat Thermometers

Click for photos

heat indicator

Part Number: 00013 (Replaces Cascade FCCS0007030)
Dimensions: 3 3/8” x 2 1/16”
Weight: 0.2

==> All Cascade Heat indicators and Meat Thermometers.

TS29LP Accessories

Wundersmoke Hickory Chips. These unique hickory wood smoking chips add distinctive hickory wood flavoring to your food. For use will all grills. Comes with reusable puck. One 1lb bag.

Part Number: BP-6
Weight: 1.0

Click for photos

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

Click for photos

Aluminum foil grilling trays. Package of three.

Heavy duty aluminum foil
Re-usable
Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

Stainless steel straight handle grill brush with replaceable head. Brass bristles and scarper. See part# WB-8RH for replacement grill brush heads. 18 1/2” long.
This part is currently out of stock, but more are already on the way and expected to arrive SPRING 23

Part Number: WB-8
Dimensions: 18 1/2
Material: stainless steel
Weight: 0.8

==> All TS29LP Accessories.

BBQ Part Categories

Cascade model TS29LP - Sunday, May 5 2024

Return to Cascade grills main page

More Cascade grill models we have parts for
CG29S-1 \| X2000 \|