Aussie Joey 7110.6.641 Grill Parts

Highest quality replacement parts for your Aussie Joey 7110.6.641 - Free USA shipping $49 or more* - No Sales Tax*

Aussie 7110.6.641 owners manual and diagrams

Diagrams & owners manual not available for grill model# 7110.6.641. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement gas grill parts for Aussie Joey 7110.6.641

This page shows all of the parts we know fit model Aussie 7110.6.641. We might not show the part you need here but we may still have it, or a functional equivalent. In this case, try the category buttons on the right. For example, if your looking for an ignitor, or other ignition components, and there are none here, click the ignition button to see what we have for Aussie grills. Knowing the dimensions of your existing part will help you find the right part.

To get the correct Aussie 7110.6.641 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Aussie model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

7110.6.641 Cooking Grids

03.6255.00 / CG-6

Click for photos

Chrome plated cooking grid for Aussie model 7110.6.641. Made in USA.

Part Number: CG-6 (Replaces Aussie 03.6255.00)
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 20”
Material: Chrome steel
Weight: 2.9

==> All Aussie Cooking Grids.

7110.6.641 Heat Plates

03.6250.00 / 96411

Click for photos

Porcelain steel heat plate for Aussie model 7110.6.641. Sold individually.

Part Number: 96411 (Replaces Aussie 03.6250.00)
Dimension Front-to-Back: 19 9/16”
Dimension Side-to-Side: 7”
Material: porcelain steel
Weight: 1.6

CLA-TS0150

Click for photos

Stainless steel heat plate/Flame Tamer for Aussie model 7110.6.641. Made in USA.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0150
Dimension Front-to-Back: 19 5/8”
Dimension Side-to-Side: 7 1/8”
Material: stainless steel
Weight: 3.2

==> All Aussie Heat Plates.

7110.6.641 Igniter Components

UP-4B

Click for photos

Universal push-button igniter. Round male connector. Includes locking nut.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-4B
Weight: 0.3

IG-30B

Click for photos

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

IG-48B

Click for photos

16” Universal Ignitor Wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-48B
Dimensions: 16
Weight: 0.05

03.6225.00 / 06120

Click for photos

Igniter electrode assembly.

Collector box
Electrode with ceramic insulator
15” wire with female round connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 06120 (Replaces Aussie 03.6225.00)
Material: ceramic
Weight: 0.1

03199C

Click for photos

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

==> All Aussie Igniter Components.

7110.6.641 Knobs and Handles

03430

Click for photos

Black control knob (Some originals may have been chrome).

Off position D-Value: 12 o'clock
Knob diameter: 2 3/16”
Socket diameter: 6mm
Knob shaft: None

Part Number: 03430
Dimensions: 2 3/16” x 2 3/16”
Material: plastic
Weight: 0.2

==> All Aussie Knobs and Handles.

7110.6.641 Regulators and Hoses

03.5854.01 / HR-4B

Click for photos

Type 1 LP Regulator with 22” Pressure Hose and 3/8” Female Flare Fitting.FITS: Up to 60,000 BTUs

Part Number: HR-4B (Replaces Aussie 03.5854.01)
Dimensions: 22
Weight: 0.8

==> All Aussie Regulators and Hoses.

7110.6.641 Accessories

SSST

Click for photos

Stainless steel smoker box with cover. For use with all grills. Insert moistened wood chips (not included) for your favorite smoke flavor, 8 3/4” x 3 1/2” x 1 1/2”.

Part Number: SSST
Material: stainless steel
Weight: 1.5

00030

Click for photos

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

WB-1

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4

==> All 7110.6.641 Accessories.

BBQ Part Categories

Aussie model 7110.6.641 - Sunday, May 5 2024

Return to Aussie grills main page

More Aussie grill models we have parts for

7462K3X-B41 | 7462KO-B11 | 7462KO-G11 | 7662 | 7710.8.641 | 7710.S8.641 | 7720.9.641 | 7820.3.641 | 7830 | 7910.7.641 | 7920.6.641 | 7920.7.641 | 7920.7X641 | 8362 | 8362-1XB51 | 8452-5-S11 | 8452-5-SL1 | 8452-5-SS1 | 8452.4NS11 | 8452.5.PR1 | 8462 | 8462-6-MR1 | 8462-7-MR1 | 8462-8-MR1 | 8462.0.MR1 | 8563 | 8563.6RSS1 | 8653F5.SS1 | 4280 | 4280-0A113 | 4280-0A116 | 6112S8X641 | 6122S8X641 | 6212S00T91 | 6212S00T91001484 | 6480-DS | 6623S8E641 | 6623S8Y641 | 6703C8FKK1 | 6703T8DV31 | 67A4T09K21 | 67C3C8KK81 | 6804 | 6804S8-S11 | 6804T8KSS1 | 6804T8UK91 | 6805 | 6805-8SSS1 | 69F6U00KS1 | Complete list of Aussie grill models...

*Orders for Aussie Joey grill model 7110.6.641 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024