Turbo Elite CG3TDBRN Grill Parts

Cast iron burner for Turbo model CG3TDBRN.

Part Number: CIT
Dimensions: 15 3/4” x 2 7/8”
Material: cast iron
Weight: 4.2

Cast stainless steel burner for Turbo model CG3TDBRN. Tired of changing out rusted cast iron burners? Far superior to the cast iron and brass versions, this burner will probably outlast your grill. Designed to replace cast iron and brass burners of same design.

NOTE: This burner is equiped with an air intake adjustable control shutter (not shown in photos) and with an air intake control screw for regulating the air/gas mixture into the burner. Natural gas applications require more air (more open screw) than lquid propane (LP). If necessary, adjust screw to get a yellow-tipped blue flame.

Part Number: 23301-CSS
Dimensions: 16” x 2 7/16”
Material: cast stainless steel
Weight: 3.2

Cast iron cooking grids for Turbo model CG3TDBRN. SET OF TWO (2) panels.

• Porcelain treated, matte finish
• Each panel measures 19 1/8” x 12 3/8”
• Overall dimensions: 19 1/8” x 24 3/4”

Part Number: CG-58P-CI-X2
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 12 3/8”
Material: cast iron
Weight: 16.7

Premium quality heavy duty stainless steel cooking grid for Turbo model CG3TDBRN. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 8 pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Dimensions: 19 1/4” x 12 1/2”
• Made in USA.
• Sold individually.

Part Number: CLA-GS0190
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12 1/2”
Material: stainless steel
Weight: 8.0

Cast iron cooking grid for Turbo model CG3TDBRN. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-58P-CI
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 12 3/8”
Material: cast iron
Weight: 8.35

Stainless steel Flame Tamer with 17 ceramic briquettes. This part also replaces an older 16-briquette version that was a little shorter and a bit narrower.

Part Number: TCCFT
Dimension Front-to-Back: 18 1/8”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 5.0

Stainless steel Heat Tent for Turbo model CG3TDBRN.

Part Number: COHP1
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 1.45

natural gas regulator.

Part Number: 90000NGR
Weight: 0.3

natural gas manifold tube. 1st from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269696
Material: brass/aluminum
Weight: 0.2

natural gas manifold tube. 2nd from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269704
Material: brass/aluminum
Weight: 0.2

natural gas manifold tube. 3rd from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269712
Material: brass/aluminum
Weight: 0.2

copper flame thrower tube. 1st from right. 150mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269613
Material: copper/brass
Weight: 0.1

copper flame thrower tube. 2nd from right. 210mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269621
Material: copper/brass
Weight: 0.1

copper flame thrower tube. 3rd from right. 310mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269639
Material: copper/brass
Weight: 0.1

stainless steel baffle for Turbo control panel.

Part Number: 100743
Dimensions: 5” x 18 1/2”
Material: stainless steel
Weight: 0.3

Ceramic briquettes for Lynx and Dynasty Grills with 28 briquettes per box.

Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0

Ceramic briquettes 48 pieces. Fits briquette trays 94751, 92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".

Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5

50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts 94751, 92571 and other simular trays.

Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2

Wundersmoke Maple Chips. These unique maple wood smoking chips add distinctive maple wood flavoring to your food. For use will all grills. One 1lb bag. Comes with reusable puck.

Part Number: BP-7
Weight: 1.0

Stainless steel chicken roaster. Commonly called Beer Can roasters.

• The best way to roast poultry on the grill
• For use in barbecues and ovens
• Dishwasher safe
• Includes rack, rack support, and basting brush

Part Number: 41333
Material: stainless steel
Weight: 0.10

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4