Turbo Classic CG3TCBN Grill Parts

Cast stainless steel burner for Turbo model CG3TCBN. Tired of changing out rusted cast iron burners? Far superior to the cast iron and brass versions, this burner will probably outlast your grill. Designed to replace cast iron and brass burners of same design.

NOTE: This burner is equiped with an air intake adjustable control shutter (not shown in photos) and with an air intake control screw for regulating the air/gas mixture into the burner. Natural gas applications require more air (more open screw) than lquid propane (LP). If necessary, adjust screw to get a yellow-tipped blue flame.

Part Number: 23301-CSS
Dimensions: 16” x 2 7/16”
Material: cast stainless steel
Weight: 3.2

Cast iron burner for Turbo model CG3TCBN.

Part Number: CIT
Dimensions: 15 3/4” x 2 7/8”
Material: cast iron
Weight: 4.2

Cast iron cooking grid for Turbo model CG3TCBN. Porcelain treated, matte finish. Sold individually, number required varies by grill model.

Part Number: CG-58P-CI
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 12 3/8”
Material: cast iron
Weight: 8.35

Cast iron cooking grids for Turbo model CG3TCBN. SET OF TWO (2) panels.

• Porcelain treated, matte finish
• Each panel measures 19 1/8” x 12 3/8”
• Overall dimensions: 19 1/8” x 24 3/4”

Part Number: CG-58P-CI-X2
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 12 3/8”
Material: cast iron
Weight: 16.7

Premium quality heavy duty stainless steel cooking grid for Turbo model CG3TCBN. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 8 pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Dimensions: 19 1/4” x 12 1/2”
• Made in USA.
• Sold individually.

Part Number: CLA-GS0190
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12 1/2”
Material: stainless steel
Weight: 8.0

Stainless steel Flame Tamer with 17 ceramic briquettes. This part also replaces an older 16-briquette version that was a little shorter and a bit narrower.

Part Number: TCCFT
Dimension Front-to-Back: 18 1/8”
Dimension Side-to-Side: 7 1/4”
Material: stainless steel
Weight: 5.0

Stainless steel Heat Tent for Turbo model CG3TCBN.

Part Number: COHP1
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 1.45

Black control knob (Some originals may have been chrome).

• Off position D-Value: 12 o'clock
• Knob diameter: 2 3/16”
• Socket diameter: 6mm
• Knob shaft: None

Part Number: 03430 (Replaces Turbo 260158)
Dimensions: 2 3/16” x 2 3/16”
Material: plastic
Weight: 0.2

natural gas regulator.

Part Number: 90000NGR
Weight: 0.3

natural gas manifold tube. 1st from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269696
Material: brass/aluminum
Weight: 0.2

natural gas manifold tube. 2nd from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269704
Material: brass/aluminum
Weight: 0.2

natural gas manifold tube. 3rd from right.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269712
Material: brass/aluminum
Weight: 0.2

copper flame thrower tube. 1st from right. 150mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269613
Material: copper/brass
Weight: 0.1

copper flame thrower tube. 2nd from right. 210mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269621
Material: copper/brass
Weight: 0.1

copper flame thrower tube. 3rd from right. 310mm in length.

Note: Our OEM Turbo and Capt'n Cook parts are genuine factory parts. They were taken from brand new grills that were disassembled for parts. Some parts may show slight evidence of prior assembly, such as a depression where a screw previously attached a part, but are fully functional and guaranteed to be new, never used.

Part Number: 269639
Material: copper/brass
Weight: 0.1

baffle for Turbo control panel.

Part Number: 100743
Dimensions: 5” x 18 1/2”
Material: aluminized steel
Weight: 0.20

50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts 94751, 92571 and other simular trays.

Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2

Ceramic briquette. Briquettes collect heat and radiate it to the food on the cooking grids. They also help prevent flare-ups and keep the flames from actually touching the food allowing for more efficient and uniform heat distribution.

Designed primarily to work in stainless steel trays on Lynx, Alfresco, and other brand grills, these briquettes can be and often are used on any grill with an ordinary grate to support them.

• Individual briquettes measure 2” x 2”
• Set includes 28 ceramic briquettes
• More than one set may be required per grill model

Part Number: BQLYX
Dimensions: 2” x 2”
Material: ceramic
Weight: 4.0

Ceramic briquettes 48 pieces. Fits briquette trays 94751, 92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".

Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5

Cedar grilling planks adds a delicious wood-smoke flavor to foods grilled on them. Great for salmon! 11 7/8” x 5 1/4” x 5/16” 100% natural cedar. Two planks per pack.

Part Number: 00281
Dimensions: 11 7/8
Weight: .45

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.

Part Number: 14913
Material: stailess steel
Weight: 0.5

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

12” long wood handle brass bristle grid brush with scraper and leather hang strap.

Part Number: WB-1
Dimensions: 12
Weight: 0.4