Sterling 4962-64 Grill Parts

Highest quality replacement parts for your Sterling 4962-64 - Free USA shipping $49 or more* - No Sales Tax*

Sterling 4962-64 owners manual and diagrams

Diagrams & owners manual not available for grill model# 4962-64. If you have a manual you're willing to share, please click here to send us an email with the attached manual. Thank You!

Replacement grill parts for Sterling model: 4962-64

This page shows all of the parts we know fit model Sterling 4962-64. If the part you're shopping for isn't included below, you might find it using the category buttons on the right side of the page. For example, if your looking for a burner and there are none here, click the burner button to see all the burners we have for Sterling grills. You will need to know the dimensions of your existing grids to help you find the right part.

To get the correct Sterling 4962-64 BBQ parts

You should measure your existing parts and compare them to what we show here. This is best done with them removed from the grill.
Verify your Sterling model number by checking the CSA appliance tag on your grill to make sure you have the correct model number. Do not rely solely on the owners manual as these are frequently mixed up at retail stores when the grills are assembled. You'd be surprised at how many folks have the wrong owners manual.

4962-64 Burners

52904-E400LP

Click for photos

Genuine OEM Sterling stainless steel main tube burner for Sterling model 4962-64. For LP gas, the air shutter should be open about 1/3.

Note: This part also the factory replacement for burner 52904-E400, which has been discontinued.

Part Number: 52904-E400LP
Dimensions: 14 1/2
Material: stainless steel
Weight: 1.0

SIDE BURNER GRID BLK 330/440/550 for Sterling model 4962-64. Grid for side burner. 9” diameter round and has two support prongs. Porcelain coated, glossy finish.

Note: Some owners manuals incorrectly list this part as 53139-98.

Part Number: 53140-981
Weight: .8

10390-E10

Click for photos

Genuine OEM Sterling Side Burner for Sterling model 4962-64. Use air shutter to adjust for LP (less air flow) or natural gas (more air flow).

Part Number: 10390-E10
Weight: 0.4

==> All Sterling Burners.

4962-64 Cooking Grids

38170121

Click for photos

Genuine OEM Sterling cast iron cooking grid, single panel for Sterling model 4962-64.

Sold individually.
Number required varies.
Porcelain treated matte finish.

Part Number: 38170121
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12 3/4”
Material: Cast Iron
Weight: 5.55

10225-E404

Click for photos

Genuine OEM Sterling stainless steel cooking grid for Sterling model 4962-64. SOLD INDIVIDUALLY. Number required varies, check your grill to be sure.

Part Number: 10225-E404
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12 3/4”
Material: Stainless steel
Weight: 5.10

10225-T436

Click for photos

Genuine OEM Sterling reversible heavy cast iron cooking grid SOLD INDIVIDUALLY for Sterling model 4962-64.

Sold individually
Number required varies, check your grill
Porcelain treated, flat matte finish
Pointed side is designed for perfect sear marks
Grooved side captures juices for continuous basting

Note: See part 10225-E404 for a stainless steel version of this grid.

Part Number: 10225-T436
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 12 3/4”
Material: Cast iron
Weight: 7.6

==> All Sterling Cooking Grids.

4962-64 Heat Plates

HP-DUMMY

Heat Plate/ Flame Tamer not known for Sterling model 4962-64. Our parts information for this grill model is incomplete, and we really don't know with certainty which heat plate fits this model. It may be that we have the part but don't show it here due to data or other error.

If you know the original OEM part number, try searching for it in the search box at the top of this page.

You can also browse through all of the heat plates we carry for your brand grill. If we don't have the exact fit for your grill, we may have a suitable replacement part. Measure your existing part so you'll know exactly what size is needed.

If you have this grill model and know the number and dimensions of your original heat plates, click here to send an email to our GrillDr that includes this information. We greatly appreciate your help.

Part Number: HP-DUMMY
Weight: 1.0

==> All Sterling Heat Plates.

4962-64 Igniter Components

10342-245

Click for photos

Genuine OEM Sterling electronic push-button 2-spade igniter.

Uses AAA battery (not included)
.Requires 3/4” mounting hole
Also replaces part# 10342-242 and 10342-249

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-245
Weight: 0.3

10342-T16

Click for photos

Genuine OEM Sterling 28” wire for side burner. One female spade connector, one female round connector..

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 10342-T16
Dimensions: 28
Weight: 0.05

==> All Sterling Igniter Components.

4962-64 Grease Trays

52009-901

Click for photos

GREASE PAN - 330/440/550

Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40

==> All Sterling Grease Trays.

4962-64 Knobs and Handles

10472-K431

Click for photos

CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP

Part Number: 10472-K431
Weight: 0.1

Lid handle bent 500 assembly. Mounting holes center to center about 23 5/8”. (Used with handle heat shield 10184-E124 when replacing handle 10184-E70.)

Part Number: 24005-12AB
Dimensions: 25 1/2
Weight: 1.10

==> All Sterling Knobs and Handles.

4962-64 Wheels and Castors

10892-7G

Click for photos

Genuine OEM Sterling 7” cart wheel with 3/8” axel hole. Mini hub cap is # 00400251, sold separately.

Part Number: 10892-7G
Weight: .45

10892-15

Click for photos

Genuine OEM Sterling caster wheel; approximately 2 3/8” diameter.

Part Number: 10892-15
Weight: 0.35

==> All Sterling Wheels and Castors.

4962-64 Heat indicators and Meat Thermometers

10571-6

Click for photos

Genuine OEM Sterling Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

==> All Sterling Heat indicators and Meat Thermometers.

4962-64 Miscellaneous Repair Parts

S21233

Click for photos

Hinge pin clip.

Part Number: S21233
Weight: 0.01

Y-11230

Click for photos

Cotter pin

Part Number: Y-11230
Weight: 0.01

ALIGNMENT, BRACKET BLACK

Part Number: 10184-E691
Weight: 1.0

S21420

Click for photos

Push nut 3/8

Part Number: S21420
Weight: 0.1

S21255

Click for photos

Washer

Part Number: S21255
Weight: 0.01

==> All Sterling Miscellaneous Repair Parts.

4962-64 Hardware

SCREW-PHCP 6-32X1/4 TY-F JS500

Part Number: Y-12835
Weight: 1.0

==> All Sterling Hardware.

4962-64 Accessories

VTC-B

Click for photos

Venturi Tube 12” Brush. Recommended by all grill manufacturers. Specially designed flexible brush to clean venturis of spider webs and other obstructions that can cause flashback fires. Stainless steel.

Part Number: VTC-B
Material: stainless steel
Weight: 0.3

==> All 4962-64 Accessories.

BBQ Part Categories

Sterling grill 4962-64 - Sunday, May 5 2024

Return to Sterling grill parts main page

More Sterling grill models we have parts for

2516-3 | 2516-4 | 2516-7 | 2518-4 | 2518-7 | 2522-2 | 2522-3 | 2522-4 | 2522-7 | 2526-2 | 2526-3 | 2526-4 | 2526-7 | 2551-4 | 2551-7 | 2555-2 | 2555-3 | 2559-4 | 2559-7 | 2565-2 | 2565-3 | 2585-2 | 2585-3 | 2588-2 | 2588-3 | 2610 | 2612 | 2612-1 | 2612-8 | 2620 | 2622 | 2630 | 2632 | 2632-1 | 2632-8 | 2640 | 2642 | 2642-1 | 2642-8 | 2712-4 | 2712-7 | 2722-4 | 2722-7 | 2732-4 | 2732-7 | 2742-4 | 2742-7 | 2811-2 | 2811-3 | 2811-6 | Complete list of Sterling grill models...

*Orders for Sterling grill model 4962-64 $49 and over ship free to the lower 48 states.
See shipping policy below for more info.

Home | Contact Us | Privacy Policy | Return Policy | Shipping Policy | About Us
Date: Sunday, May 5, 2024